|
| 1 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified. |
| 2 | M & L for 75 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed. |
| 3 | M&L for 100mm thick Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate finished surface even & smooth without using extra cement complete all as specified. |
| 4 | Forming construction joints 30mm deep x 10mm wide filled with sealing compound of grade 'B' complete all as specified and directed. |
| 5 | Forming contraction (Dummy) joints 35mm deep x 10mm wide filled with sealing compound of grade 'B' complete all as specified and directed. |
| 6 | Finishing surface of concrete by brooming while concrete is green complete all as specified and directed. |
| 7 | M&L for laying machine pressed precast concrete interlocking with grey cement and pigment reflective coloured (Glozy Finish) pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade all as specified. |
| 8 | All as per above Except Interlocking tiles (60mm) including filling with sand cushioning ( where ever required ) including levelled with Existing tiled surfaces Complete all as spd and directed by Engineer in Charge ( Note :- Sand and PCC shall be paid and measured Separtely ) |
| 9 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade, finished with grey cement and pigment, rubber moulded complete all as directed. |
| 10 | All as per above Except Interlocking tiles (80mm) including filling with sand cushioning ( where ever required ) including levelled with Existing tiled surfaces Complete all as spd and directed by Engineer in Charge ( Note :- Sand and PCC shall be paid and measured Separtely) |
| 11 | M&L for Sand filling 30mm under paver blocks for cushion Complete all as specified and directed. |
| 12 | M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm thk fixed with grey cement and pigment reflective colour (glozy finish) set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified. |
| 13 | Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cespits, manholes, pier holes etc. n exc 10 sqm on plan and exc 1.5m I depth and getting out in any type of soil |
| 14 | Removing excavated material exc 50 but n exc 100m and depositing where directed at a level n exc 1.5m above the starting point |
| 15 | M & L for cement concrete in foundation filling and mass concrete Type D2 1:4:8 using 40mm gradded stone aggregate |
| 16 | M & L for cement concrete in surface channel and drain Type C2 1:3:6 using 20mm gradded crushed stone aggregate |
| 17 | Demolition of brick work or stone/boulder masonry including all quoins, arches, pillars etc , precast concrete articles and precast concrete block walling built in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 18 | M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge |
| 19 | Taking down cement plaster from brick walls/ stone walls etc. of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 20 | M&L precast cement concrete block masonry with solid blocks made of PCC (1:3:6) type C1 using 20mm graded stone aggregate exc 10cm in width and set in CM 1:6 complete |
| 21 | M&L Rendering 15 mm thick in cement mortar (1:4) on concrete surfaces/brick wall surface, finished even and smooth without using extra cement complete all as specified. |
| 22 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified. |
| 23 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed. |
| 24 | M&L for 18-20 mm thick Granite (of any type) machine cut bedded and jointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed in CM 1:4 complete all as specified and directed. |
| 25 | M&L for 18-20 mm thick Granite (of any type) machine cut in skirting/dado laid over 10mm thick cement screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. Please Enable Macros to View BoQ information |
