|
| 1 | Demolition of one way woodenTrellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) |
| 2 | Dismantling of old framed timber scantlings 40 sq. cm and over in section, in any position |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in Ordinary Rocks foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed by Engineer-in-Charge |
| 4 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete. |
| 5 | Material & labour brick work with sub class ‘B’ modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 6 | Material & labour for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping above Boundry Wall or any other location as desired by user and including necessary form work finishing exposed surface complete all as specified and directed. |
| 7 | Material & labour for plastering 10 mm thick on brick walls masonary as fair face of cement mortar 1:4 surface finished even and smooth without using extra cement complete all as specified and directed by Engineer in Charge |
| 8 | M & L for preparing new plastered surface of wall and applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and as directed. |
| 9 | Returning refilling spreading levelling in layers with available soil in layers n exc 25 cm thk watered and well rammed . |
| 10 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m complete all as directed above the starting point . |
| 11 | Supply & fixing mild steel angle iron posts and struts in fencing, steel gate frame including handmade hinges etc. including cutting top to shape as directed drilling holes welding and notching for wire etc and flat iron fillets for securing wire mesh including bedding or riveting etc conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 12 | Material & labour preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed. |
| 13 | S & F for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed. |
| 14 | Ditto As 13.00 above but in Stirrups |
| 15 | M&L RCC M-20 grade for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as directed. |
| 16 | M&L RCC M-20 grade for Columns, pillars, piers, posts and strutscomplete all as directed. |
| 17 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter columns, etc.; basement slabs under-reamed piles and mass concrete complete all as specified and as directed by Engineer-in-Charge |
| 18 | Material and Labour to Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed by Engineer-in Charge |
| 19 | Framed work of Grade Fe 410-W (GdeE- 250) quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 20 | Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standerd, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed. |
| 21 | Supply only chain link MS galvanised fencing of mesh size 100 mm x 100 mm , complete all as specified and directed. |
| 22 | Supply & fixing mild steel screw bolts ( machine made) with hexagonal heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut not exc 5cm and dia of shank 11 to 15mm complete all as specified and directed. |
| 23 | Fibre glass reinforced translucent Plain sheeting of minimum thickness 02 mm, with adequate lap (comparable to two corrugations side lap) fixed with L-type or J-type or cranked hook bolts in lieu of screw complete all as specified and as directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
