|
| 1 | Providing and supplying to SubDist Hospmorshi Rollar Blinds AMI | Providing and supplying Rollar Blinds AMI Make or approved make and shade of 38mm round Aluminium channel with Blackout fabric and telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer Incharge prior execution of work) |
| 2 | Providing and supplying Vertical Blinds | Providing and supplying Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain and bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer Incharge prior execution of work) |
| 3 | Providing and supplying CUBE MAIN TABLE ASSY 50MM THK MDF VENEER | Providing and supplying CUBE MAIN TABLE ASSY 50MM THK MDF VENEER WITH BBF PEDESTAL ONE SIDE LHS 2400WX1200DX750H WITH Return Storage With Wooden Drawer Assly. LH at 1800 X 600 X 625 HT. and Cube Back Storage With 3 Door Assly. at 1650 X 600 X 625 HT. 3NOS. BACK UNIT Cube Back Upper Storage Assly. Open Shelf With Glass Door.at 1650 X 450 X 1475 HT. 2 NOS. FOR MS CABIN |
| 4 | Providing and supplying Table of size1500Lx750Dx750HT top made from 25 mm prelaminated particle board | Providing and supplying Table of size1500Lx750Dx750HT top made from 25 mm prelaminated particle board all edage are covered by 2 mm Thk pvc edge bands glued by hot melt glue Gable ends made from 25 mm prelaminated particle board all edage are covered by 0.8mm pvc edge bands glued by hot melt glue applied by auto edge banding machine. Modesty panel made from 18mm bolt side prelaminated particle board. All edage are covered by 0.8mm PVC edge bands glued by hot melt gule applied by auto edge banding machine. Keyboard Tray ( without mouse Tray) metal powder Coated Black colour cpu trolley metal powder Coated Black colour 3 Drawers pedestal unit having overall size 405mmx 460mmx 685mm with central lock and key drawers are complete metal powder coated with ball bearing slide for 2 book drawers and telescopic slide for filling drawer,body and facia in 18 mm pre laminated particle board as per design and drawing and instructions of engineer in charge |
| 5 | Providing and supplying of Main Table at 3600Lx1400Dx750HT | Providing and supplying of Main Table at 3600Lx1400Dx750HT made up of 1818mm Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge bandAccess Flap For Wire manager 2 Nos. |
| 6 | Supply, Fitting and Fixing of Prelam Table at 1500LX600DX750HT. WITH 2B1F PEDESTAL at 400LX450DX670HT. | Supply, Fitting and Fixing of Prelam Table at 1500LX600DX750HT. WITH 2B1F PEDESTAL at 400LX450DX670HT.Work Top Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823 1990 with 2mm thick PVC lipping glued with Kliberit779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg mm load on Top and concentric load test by applying 90kg load on weaker sectionUnderstructure Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823 1990 with 2mm thick PVC lipping glued with Kliberit779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix and Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm.Wire management Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. |
| 7 | Supply, Fitting and Fixing of Prelam Cabin at 1350LX600DX750HT. WITH 2B1F PEDESTAL at 400LX450DX670HT | Supply, Fitting and Fixing of Prelam Cabin at 1350LX600DX750HT. WITH 2B1F PEDESTAL at 400LX450DX670HT.Work Top Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823 1990 with 2mm thick PVC lipping glued with Kliberit779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg mm load on Top and concentric load test by applying 90kg load on weaker sectionUnderstructure Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823 1990 with 2mm thick PVC lipping glued with Kliberit779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix and Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm.Wire management Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products.2B1F PEDESTAL at 400LX450DX670HT. SPECIFICATIONS Pedestal Top Shall be made 18mm thick Prelam (OSL) particle board confirming to IS 12823 1990 with 2mm thick PVC lipping glued with Kliberit779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg mm load on Top and concentric load test by applying 90kg load on weaker section |
| 8 | Providing and supplying Openable Steel Storage of 750 x 450 x 1200Ht | Providing and supplying Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body and shutter made in 0.8 mm thick and Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk. as per drawing. |
| 9 | Supply, Fitting and Fixing of Prelam Cabin. at 1500LX600DX750HT. | Supply, Fitting and Fixing of Prelam Cabin. at 1500LX600DX750HT.Work Top Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823 1990 with 2mm thick PVC lipping glued with Kliberit779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg mm load on Top and concentric load test by applying 90kg load on weaker sectionUnderstructure Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823 1990 with 2mm thick PVC lipping glued with Kliberit779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix and Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm. |
| 10 | Supply, Fitting and Fixing of SOS Make Metal Storage | Supply, Fitting and Fixing of SOS Make Metal StorageStorage body The construction and material of storage body shall be of 0.8mm thick CRCA and skirting shall be of 1.2mm thick CRCA sheet confirming to IS 513 2008 with powder coated finish up to 50 to 60 Micron. The storage top shall be made up of 2mm thick CRCA sheet with 0.7 mm thick CRCA sheet THAT for extra support. Shelf shall be made up of 0.8mm CRCA sheet confirming to IS 513 2008 with 0.8mm Thick CRCA sheet THAT is given for extra support. Shelf shall be mounted with the Metal shelf support pin made of 2mm thick CRCA sheet with Nickel or Chrome plating. Load bearing capacity of the shelf shall be 30Kgs UDL. The construction shall be aesthetically appealing completely welded. M10 screw leveler is given with height adjustment up to 12mm to 15mmMetal Shutter Shall be made up of 0.8mm CRCA sheet confirming to IS 513 2008 with powder coated finish up to 50 to 60 Micron and 0.8 mm CRCA sheet T HAT is given for extra support and to screw hinges on shutter. Shutter is hinged shutter with equal width hung with 0 Crank on side panel. Multipurpose square lock is used to lock the shutter. PVC flush handles are used in metal shutter. |
| 11 | Providing and supplying of Book Case with Glass Shutter at 825Lx300Dx1650HT | Providing and supplying of Book Case with Glass Shutter at 825Lx300Dx1650HT To be made out of complete body and in 0.7mm thick CRCA and Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing. |
| 12 | Providing and supplying Multiple Compartment Lockers at 1140Lx 457D x 1830 mm | Providing and supplying Multiple Compartment Lockers at 1140Lx 457D x 1830 mm. Ht. with 12 Compartments , Complete body and shutter made of CRCA Sheet with powder coated finish as per approved color. |
| 13 | Providing and Arrangemnt of High Back, Synchronized Mechanism | Providing and Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5prong P Nylon Base with Leatherite Upholstery |
| 14 | Providing and Arrangemnt of High Back Chair | Providing and Arrangemnt of High Back Chair TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. |
| 15 | Providing and supplying Adjustable Seat Height, Armrest, Locking Mechanism | Providing and supplying Adjustable Seat Height, Armrest, Locking Mechanism, Seat Lock, Swivel, Wheels, Head Support W x H 63 cm x 114 cm Frame Material Sold Wood Upholstery Type Cushion Diy Basic assembly to be done with simple tools by the customer, comes with instructions. |
| 16 | Providing and supplying Make Wipro Company. The seat and back | Providing and supplying Make Wipro Company. The seat and back shall be made up of wood veneer with foam back. The chair can also be provided with fixed wooden armrests .The dimensions of back shall be 49 cm (W) X 37 cm (H) and of seat shall be 51 cm (W) X 50.0cm (D). The Seat and Back Inner shall be upholstered with PU foam and fabric and shall be assembled over the seat and back. The chair is made of Rubber wood veneer with thickness of the leg 25 mm and width of the leg at 28mm. Seat Height 46 cm, Height83.0cm, Width and Depth of Chair as measured from base Width60.0cm and Depth56.0 cm.Dimensions tolerance variations shall be within 1 cm. |
| 17 | Providing and Arrangemnt of MId Back, Normal Syncro Mechanism | Providing and Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5prong Nylon Base with Leather Upholstery |
| 18 | Providing and supplying 4 legged Lab stool, Legs made of 16 Guage | Providing and supplying 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. |
| 19 | Providing and supplying Foldable Alluminum Ladder 1500 mm. Ht. | Providing and supplying Foldable Alluminum Ladder 1500 mm. Ht. |
| 20 | Providing and supplying Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass | Providing and supplying Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. |
| 21 | Providing and supplying 3 seater Public seating chair made of complete metal | Providing and supplying 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. |
| 22 | Providing and supplying Two Seater Tandem Chair with Metal Seat and back | Providing and supplying Two Seater Tandem Chair with Metal Seat and back, Main Frames to be made out of Dia 50 x 1.6 mm wall thickness and Arms are made out of ERW Oval tubes of size 48 x 22 and 1.6 mm wall thickness. SEAT AND BACK Frames to be made out of ERW Tube Dia 16 x 1.2 mm wall thickness, Seat and back are made out of CRCA 1.6 mm thickness duly perforated, with Nickel Chromium plated decorative knobs. All metal should be Powder coated .Three seater (Tandem) chair will be sent in knock down condition and be assembled at site, as per design and drawing and instructions of Engineer in charge. |
| 23 | Providing and supplying Single Bed of Size 2025Lx1000Dx650H | Providing and supplying Single Bed of Size 2025Lx1000Dx650H with matress and pillow. Understructure The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure.Head Board The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm.Foot Board The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm.Bed Base The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. |
| 24 | Providing and supplying Dressing Table of size 400LX 400DX 1800H. | Providing and supplying Dressing Table of size 400LX 400DX 1800H.The Dressing table unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The unit has one drawer and one shelf. The dressing table has a mirror of 4mm thick pasted on 18mm thick prelm particle board attached to the base unit. The mirror size considered is 1155 x 360 x 4(t). The mirror has been pasted using high quality 3M sticker. |
| 25 | Providing and supplying Bed Side Table of size 400LX 400DX 415H | Providing and supplying Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding |
| 26 | Providng and fixing factory finish 3 seater sofa made of imported red miraty ood | Providng and fixing factory finish 3 seater sofa made of imported red miraty ood with foam in 40 density for seat and for back in 28 density.Premium quality cenflax P.U. foam ith letherite upholstry as per design and drawing and as directed by Engineerincharge |
| 27 | Providing and supplying factory finish 1 seater sofa made of imported red miraty wood | Providing and supplying factory finish 1 seater sofa made of imported red miraty wood with foam in 40 psi density for seat and back in 28 psi dnsity premium quality sunflex PU foam with leather upholstry as per design and dwg and instructions of Engineerincharge |
| 28 | Providing and fixing slotted angle storage rack at 905L x 605 x 2400 HT | Providing and fixing slotted angle storage rack at 905L x 605 x 2400 HT shlf to be made of 1 mm CRCA powder coated vertical members made of 35x35x1.5 CRCA,base plate at bottom which can be usd for grouting of the shelf including asembly hardware as per design and drawing and instructions of Engineerincharge |
| 29 | Supply, Fitting and Fixing of Prelam Storage. | Supply, Fitting and Fixing of Prelam Storage.Storage Top Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750 mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823 1990 with 2mm thick PVC lipping glued with Kliberit779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL. |
| 30 | Providing and supplying Full Height Partitions in Solid finish | Providing and supplying Full Height Partitions in Solid finish Providing and supplying 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized Powder coated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 9mm thk. Prelaminated Partical Board of on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing. |
| 31 | Providing and supplying 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height | Providing and supplying 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mm thk. Non Toughened Glass on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing. |
| 32 | Providing and supplying of Glass Door and Frame at 900mm x 2100mm | Providing and supplying of Glass Door and Frame at 900mm x 2100mm 12mm thk toughened glass door with frame in Anodized Aluminium with rubber gasket on both verticals for better sound proofing and provision for one side opening along Hardware consisting of Floor Spring Dorma Equivalent, Patch fitting , Lock, door stopper and Handle, as per design and drawing and instructions of Engineer in charge. |
| 33 | Providing and supplying Medium Height Partition at 1800 1200HT | Providing and supplying Medium Height Partition at 1800 1200HT TILE BASED PARTITION SYSTEM Tile based Aluminum partition system of 1800 1200mm ht. made of 60mm thick aluminum frames having two separate race ways for laying electrical and computer wiring. The wire management shall be through to the race way to be fitted at bottom of partition other immediately below of work top with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 x 16 panhead machine screw and washer with aluminum post cover. Post cover snap on fashion to be connected on aluminum connector visible aluminium to be in anodized powdercoated finish. The top exposed sides of the frame and posts should be covered with horizontal Vertical trim and caps made of Aluminum in anodized powdercoated finish in order to enhance its look.Upper tiles on the partition to be in Soft Board or Marker or prelaminated partical board tile of 9mm. thk., prelaminated partical board lower tiles in laminate finish 9mm. thk. on both the sides .Size 1200 1800mm (H) |
| 34 | Providng and fixing in position anodised extruded aluminum partitions | Providng and fixing in position anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990, laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions as per approved drawing etc. compete.Colour anodized |
| 35 | Providing and fixing in position, Double shuttered aluminium | Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 |
| 36 | Supplying Single Piece Plastic Moulded chair of size 510 mm x410mm x790 mm | Supplying Single Piece Plastic Moulded chair of size 510 mm x410mm x790 mm with arm rest of approved colour with 1 year waranttee as directed by Engineer in charge |
| 37 | Providing and supplying storage of size 1600Wx450Dx650H in combination | Providing and supplying storage of size 1600Wx450Dx650H in combination of three drawers unit with soft closing slides and openable shutter unit with shutters made of MDF with membrane finish and body is made of 0.8 mm thickness CRCA sheet with radius of 50 mm on all four minor lengths to avoid sharp edges with powder coat finish.storage supported with legs made of alumnium T section for main support along with front portion covered with natural maple wood in melemaine finish toi enhance the asthetics as per design and drawing and as directed by Engineer in charge |
| 38 | Providing and supplying Fire exit and floor identification signage as per manufacturers specifications | Providing and supplying Fire exit and floor identification signage as per manufacturers specifications, ADA compliant and modular system |
| 39 | Providing and supplying SS Braille buttons Directional signage | Providing and supplying SS Braille buttons Directional signage in the elevator of the approved brand and make to be installed using the specified adhesive and as per the instructions given by the manufacturer |
| 40 | Providing and supplying of high intensity reflective conspicuity | Providing and supplying of high intensity reflective conspicuity tape 25 to 50mm width, on edges of treads in staircase including, cutting, pasting etc. of make 3M or equivalent brand as per the direction of engineer in charge |
| 41 | Providing a folding wheelchair of Pioneer Surgicals Brand, model Number PS 809 equivalent | Providing a folding wheelchair of Pioneer Surgicals Brand, model Number PS 809 equivalent make as per the directions of the engineer in charge. |
| 42 | Providing and supplying Free Standing Finish Type Natural Burnt Suitable | Providing and supplying Free Standing Finish Type Natural Burnt Suitable For General Utility Furniture, Bedroom Upholstery Included Number of Panels 3 Foldable Screen Type Decorative Screen Model Series Name Handcrafted 3 Panel Wooden MDF Room Divider Screen With Stand Included Primary Material Wood Primary Material Subtype Wood Secondary Material Wood Secondary Material Subtype MDF Primary Color Brown Finish Color Brown Dimensions Width 152.4 cm Height 182.88 cm Depth 1.828 cm Other Dimensions Each Panel Length 20 Inch, Height 72 Inch |
| 43 | Provinding and fixing signages of various size as per design of whit 6 mm | Provinding and fixing signages of various size as per design of whit 6 mm imported acrylic sheet with laser cut vinyl ltters over acrylic sheet including all lead,lift and necessary fixtures required etc complete. |
| 44 | Provinding and fixing maharashtra government department logo using wood platic composite or equivalent with exteriror colur and polish in size 6 feet x 2 feet | Provinding and fixing maharashtra government department logo using wood platic composite or equivalent with exteriror colur and polish in size 6 feet x 2 feet |
| 45 | Dust Bin Supplying Dust Bin of Polypropelene material 10 lit | Dust Bin Supplying Dust Bin of Polypropelene material 10 lit |
| 46 | Door Mat Supplying Door mat of size 3 feeet x 2 feet | Door Mat Supplying Door mat of size 3 feeet x 2 feet |
| 47 | Providing and supplying 25 MM THICK BED SIDE PLATFORM at 2200LX450D. | Providing and supplying 25 MM THICK BED SIDE PLATFORM at 2200LX450D. FOR ROOM TOP 25 mm thick Prelaminated board, with wall mounting brackets |
| 48 | Providing and supplying SS DINING TABLE WITH FOLDING CHAIR FOR DINING | Providing and supplying SS DINING TABLE WITH FOLDING CHAIR FOR DINING Top Top is made up of Stainless steel having a length of 1800(L) X 760(D) X 750(H) confirming the grade 304 Understructure Understructure legs vertical member are made up of 40 x 40 x 1.2 mm thick MS pipe confirming the IS 4932 with powder coated finish up to 50 to 60 Micron. Horizontal member is made up of 25 x 25 x 1.2 mm thick confirming the IS 4923with powder coated finish up to 50 to 60 Micron. Both the horizontal and vertical pipes are welded together by MIG welding confirming to IS standard IS 8161969 and it is welding also tested by confirming to IS 8221970. Understructure height will be 725mm from the ground, and the bench height will be 500mm from the ground. |
| 49 | Providing and supplying Pre Laminated Particle Board Shoe Rack, Grooves and Joints has made a reputed name | Providing and supplying Pre Laminated Particle Board Shoe Rack, Grooves and Joints has made a reputed name for itself in the market with highquality Modular Wardrobe, Pre Laminated Particle Board Shoe Rack |
