|
| 1 | Taking down of chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed |
| 2 | Ditto all as per item No 1.00 above but area exc 1.50 Sqm but n-exc 4.0 Sqm each |
| 3 | Taking down of sutters of any description exc 1.0 sqm but n-exc 2 Sqm each complete all as specified and directed. |
| 4 | S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm mild steel sheets complete all as specified and directed |
| 5 | S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm mild steel sheets complete all as specified and directed |
| 6 | Material and labour for PCC 1:3:6 type C-1 (20mm graded agg) filling in pressed door chowkat/hold fast blocks complete all as specified and directed |
| 7 | Supply and fixing plain framed panelled shutter 35mm thick of 2nd class hardtwood, (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatsist , complete all as specified and directed. |
| 8 | Supply and Fixing glazed and skeleton shutter,35mm thick of 2nd class wood ,open rebate and divided into squares ,with plain,chamfered or rounded, mitred and rebated sash bar ,any number :supplied and fitted to chaukhats,completed all as specified and directed. |
| 9 | S&F SS wire cloth 0.36 mm nominal dia of wire and average width of apurture 1.40mm and including fixed with wooden beading for securing wire gauge with SS wire stappler complete all as specified and directed |
| 10 | S&F as in repair SS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with SS wire stappler complete all as specified and directed |
| 11 | Supply and fixing 300mm mild steel ordinary rat rail rod pattern spring incl roller & roller plate complete all as specified and directed by Engr-in-charge. |
| 12 | Supply and fixing aluminium anodised barrel tower bolts of extruded section and fixed of 200mm long complete all as specified and directed by Engr-in-charge. |
| 13 | Supply and fixing aluminium alloy anodised sliding door bolt 300mm long with haps staple bolt type and fixing clips of sheet etc complete all as specified and directed by Engr-in-charge. |
| 14 | Supply and fixing 150mm long aluminium handles cast type anodized complete all as specified and directed by Engr-in-charge. |
| 15 | M&L for powder coated aluminium anodised window sliding type (2 x glass & 1 x wiremesh shutter) with and including 3 to 4 mm thick glass as approved, stainless steel wiremesh fixing with necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable anodised fittings such as, autolock, handles, including anodised aluminium frame, with one or more rebates and all necessary related items complete, all as specified & directed by Engr-in-charge. |
| 16 | Supply and fixing powder coated aluminium window /ventilator, openable type, made out of hollow extruded aluminium sections, as approved and fixed with and including 5 to 6mm thick tinted/froasted/black glass with glazing clips rubber beading / gasket, anodised aluminium beading screws, S/S wiremesh, locking systeme, handles, etc and making provision for exaust fan, complete all as specified and directed by Engr-in-charge. |
| 17 | Framed work such as grills, gratings, etc.. with ends of bars, shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk, ways; railings; framework of, water tanks and similar work, conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 18 | Supply and fixing for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge. |
| 19 | S&F, Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 20 | Supply and fixing for 100mm long but hinges heavy duty cold rolled mild steel medium weight complete all as specified and directed by Engr-in-charge. |
| 21 | M&L, 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 22 | Supply and fixing in repair 20 mm dia stianless steel, 1mm thick curtain rods with and including fancy type stianless steel funnel, holding bracket with suitable screws etc, complete all as specified and directed by Engr-in-charge. |
| 23 | S&F in repairs bib taps, cast copper alloy , fancy type, chromium plated, long body with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 24 | S&F in repairs pillar taps, cast copper alloy, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 25 | S&F in repair angular stop cock with wall flange ,cast copper alloy ,fency type ,chromium plated with crutch or butterfly handles ,screwed down ,screwed both ends for 15mm bore GI pipe or for brass ferrule or GI socket completed all as specified and directed |
| 26 | S&F in repair tubular towel rail , brass, chromium plated, fancy type, min 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed |
| 27 | S&F in repair circular towel holder ,brass, chromium plated,fancy type,of diameter 200mm fixed with and including CP brass screws, rawl plug etc completed all as specified and directed |
| 28 | S&F in repair soap dish/plate , 3mm thick stainess steel of size 300 x 100mm, fancy type , with impression/mould for soap, paste etc alongwith adequet perforations, holes for tooth brush fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. |
| 29 | Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed by Engr-in-charge. |
| 30 | S&F in repairs vitreous china squatting pan ' Orissa pattern' size 580 x 440 mm, white with integral foot rest (excluding flushing cistern and flush pipe) with cast iron ' P ' trap and including connecting to trap and flushing pipe, anti syphonage pipe etc complete & including making good to floor complete all as specified and directed. |
| 31 | Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including plastic water closet seat white/black, connection to out going pipe and flushing pipe complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F in repair vitreous china wash hand basin (flat back) of size 580x450mm excluding taps, waste,chain and plug and porcelain stopper but including one number waste fittings, 32 mm dia, brass, chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe 610 mm long with connector,with and including MS brackets and cutting for and pinning in ends of brackets complete all as specified and directed. |
| 33 | Ditto all as per item No 32.00 above but oval type, fixing with granite platform, complete all as specified and directed |
| 34 | S&F in repair Sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one chromium plated suitable waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. |
| 35 | S&F in repairs PVC waste pipe of 32 mm bore of suitable length for WHB/urinal/sink complete all as specified and directed. |
| 36 | S&F in repair, Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 37 | S&F in repair transparent 6.30mm thick glass corner shelf of size 250mm radius, complete with CP grill, bracings/brackets and screws etc complete all as specified and directed. |
| 38 | S&F in repair health faucet ABS body, fancy type with wall hook and one meter stainless steel braided rubber hose pipe suitable and screwed for 15 mm bore GI pipe including necessary fixing arrangement as per manufactures instructions complete all as specified and directed. |
| 39 | S&F in repair grating 100/125 mm dia of ,steel chromium plated with or without hole as required complete all as specified and directed. |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 41 | M&L for non skid coloured Ceramic tiles,first quality( of approved class , colour and design/ shade ) 7 to 8 mm thick (Square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with shade of coloured tiles over and including 15 mm thick screed bed in Cement mortar 1: 6 Complete all as specified and directed. |
| 42 | M&L for vitrefied coloured Ceramic tiles,first quality( of approved class ,light Shade, double charged ), 8 to 10 mm thick (Square/ rectangular),polished, area of each tiles not exceeding 0.36 sqm, ,as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with shade of coloured tiles over and including 15 mm thick screed bed in Cement mortar 1: 6 Complete all as specified and directed. |
| 43 | M&L for vitrefied coloured Ceramic tiles,first quality( of approved class ,dark Shade), 10 mm thick (Square/ rectangular),polished, area of each tiles not exceeding 0.36 sqm, ,(cut in required size), fixed on vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed. |
| 44 | M&L for glazed coloured ceramic tiles ,first quality ( of approved class , colour and design/ shade ) of size 450 x 300 x 7 to 8 mm thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed. |
| 45 | M & L for Udaipur green stone not less than 16 mm thick factory made bull nosed, pre polished (table rubbed and polished) as in trade, jambs, window cill, cooking plateform and the like etc over screed bed 15 mm thick in CM 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone and making hole for gas pipe complete all as specified and directed |
| 46 | M & L for Udaipur green stone not less than 16 mm thick factory made bull nosed, pre polished (table rubbed and polished) as in riser of step skirting /dado and the like etc over screed bed 10 mm thick in CM 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone complete all as specified and directed. |
| 47 | M&L 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregates as in plinth protection finishing cement concrete even and smooth without using extra cement complete all as specified and directed. |
| 48 | Taking down plaster or cement lime plaster of any description including racking out joints,hacking for keys,scrubbing down with water etc completed all as specified and directed |
| 49 | M & L for applying 15 mm thick rendering in CM 1:4 on brick / concrete surfaces of external walls finished even and smooth without using extra cement using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid sepratly |
| 50 | M&L Rendering 5 mm thick in cement mortar (1:3), on fair faces of concrete surfaces, finished even and smooth, over and including fixing of chicken wiremesh as per approved quality before plastering on ceiling complete all as specified & directed. |
| 51 | Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even as in wall complete all as specified and directed. |
| 52 | M&L for preparing new plastered or un-plastered surfaces, & applying wall care putty 1.5 to 2 mm thick on prepared surface for smooth finishing and applying two coats of oil emulsion distemper over a coat of suitable primering as a base coat as per manufacturer's instructions with using rollar, complete all as specified and directed. |
| 53 | M&L for preparing new plastered or un-plastered surfaces and applying 1.5 to 2 mm thick exterior grade wall care putty on existing prepared surface for smooth finishing and applying two coats of weather proof exterior emulsion paint silicon based over a coat of water based suitable primering as a base coat as per manufacturer's instructions with using roller complete all as specified and directed. |
| 54 | Complete removal of existing treatment on wall/ceiling/roof projections including chajja, facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc and applying 1.5 mm to 2 mm thick wall care putty making smooth surface by skilled labour complete all as specified and directed. |
| 55 | M&L for applying two coat of oil emulsion distemper(OBD) (on plastered or unplastered surface) using roller on old surfaces, complete all as specified and directed. |
| 56 | Preparation of plastered/unplastered surfaces and applying two coats of premium acrylic emulsion paint exterior weather coat using roller, complete all as specified and directed. |
| 57 | Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed |
| 58 | M&L for brick work with sub class 'B' bricks, old size straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed |
| 59 | M&L for brick work (except bricks), old size straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 60 | M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 61 | S&F in repair PVC (SWR) pipe 110 mm bore ,single socketed ,in any length with rubber ring joint including jointed with approved adhesive and fixed to wall /under floor with suitable clamps completed all as specified and directed |
| 62 | S&F in repair PVC (SWR) pipe 75 mm bore ,single socketed ,in any length with rubber ring joint including jointed with approved adhesive and fixed to wall /under floor with suitable clamps completed all as specified and directed |
| 63 | S&F in repair PVC (SWR) branch piece,75 mm bore, single (single Y) equal or unequal and jointed with approved adhesive complete all as specified & directed. |
| 64 | S&F in repair PVC (SWR) bend 110 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed. |
| 65 | S&F in repair PVC (SWR) branch piece,110 mm bore, single (single Y) equal or unequal and jointed with approved adhesive complete all as specified & directed. |
| 66 | S&F in repair PVC (SWR) bend 75 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed. |
| 67 | Supply & fix in repair PVC (SWR) vent cowl 110 mm bore, and jointed with approved adhesive complete all as specified & directed. |
| 68 | M&L, 75mm dia, PVC (SWR) multi floor trap, with grating including jointing with solvent cement, complete all as specified & directed. |
| 69 | M&L, PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement, complete all as specified & directed. |
| 70 | Disconnecting & taking down existing water tank any type and S&F rotational moulded polyethylene water storage tanks 500 liter capacity (cylindrical vertical with closed top) with and including PVC ball valves, high pressure with polythene float and fly nut complete screwed for 20 mm bore iron pipe or for brass ferrule, hoisted and fixed in position all as specified in SSR Part I 2009 complete all as specified & directed. |
| 71 | All as per item no 70 but water storage tanks 1000 liter capacity complete all as specified and directed. |
| 72 | S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia.fixed in repair) complete all as specified and directed. |
| 73 | S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair) complete all as specified and directed. |
| 74 | M&L for dismantling/taking down old dilaped/broken RCC chajja, facia, dropwall, roof projection, shelf/rack etc and repairing/re-casting of the same with reinforced cement concrete type B1,1:2:4(20mm graded stone aggregate), including necessary formwork, scaffolding and TMT steel reinforcement if required, upto four storeys and making surface smooth and finish with PCC type B0, 1:2:4(using 12.5mm graded aggregate) as in fillet, rendering 5mm thick in cm 1:3 on soffit with drip course and 10mm thick rendering in cm 1:4 for concrete surface with WPC after strucking off formwork, area not exc 2.0 Sqm each, including removal of deberies from the site and disposed out side the the MD land, complete all as specified and directed.Note- Steel reinforcement whenever used will be measured and paid separately under respective items) |
| 75 | M&L for cutting and completely removing of bushes, small trees, vegetation (Peepal, small plants etc) growth alongwith its roots on building wall/roof/chhajja/parapet wall/water tank staging area etc or like of any dia and girth at any height by necessary demolition of brick, concrete, plaster portion if required and filling holes on and making good disturbed surfaces to match with existing surface with cement mortar 1:4 with and including WPC and PCC 1:2:4 as per site requirement, complete all as specified and directed. |
| 76 | Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work putside of defence land.(b) Material & labour for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix PVC (SWR) floor trap of 75/110mm dia and 32mm dia GI pipe medium grade, 450m long (for draining out the water) all as directed by engineer-in-Charge |
| 77 | Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as spd & directed. |
| 78 | M & L PCC (1:2:4) Type B-1 using (20mm graded stone aggregate) as in precast cover slabs for man holes/Soakage Well/Septic Tank, shelves, kitchen platformlintels and like, set in cement mortar 1:4, with and including necessary form work, placing in desired position, complete all as specified and directed. |
| 79 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 80 | Labour only, desilting, completely removing of vegitation growth, cleaning of surfacecs, etc of existing drain of any section, and thrown away out of defence land, complete all as specified & directed. |
| 81 | M&L, Cement concrete, type B-2 1:2:4 using (40 mm graded stone agg) in surface channels and drains complete all as specified and directed. |
| 82 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc all as specified and directed. |
| 83 | M&L for 75mm thick PCC, Type D2 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base, flooring, pavings etc finished rough to receive floor finishes/screed complete all as specified and directed. |
| 84 | M&L for coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 85 | Taking down old existing water proofing treament from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises. Complete all as specified and directed. |
| 86 | M&L for 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in padding or roof finished even and fair without using extra cement.Complete all as specified and directed. |
| 87 | M&L for 20MM thick cement plaster in CM 1:4 on roof surfaces with water proofing compound @ 200ML PER BAG OF CEMENT, . Complete all as specified and dirtected. (Note- water proofing compound shall be paid separately). |
| 88 | Supply only integral water proofing compound. |
| 89 | M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30 kg/sqm followed evenly by a tack coat @ 1.20kg/sqm using 85/25 grade industrial hot blown bitumen, over it laid with APP modified polymeric water proofing membrane weight 3.6 kg/sqm reinforced with non-woven polyster fabric (weight not less than 160 gm/sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufcturers instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20kg/sqm and finally finished the top of polymeric water proofing membrane with a coat of bitumen aluminium paint @ 0.20kg/sqm as per manufacturers instructions. Complete all as specified and directed. |
| 90 | S&F Brand Facroty Made 18-20mm thick 100% Solid WPC (Wood polymer Composite) plain Board of reqired size comprising of virgin PVC resin of K valve 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood powder/rice husk/ wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650Kg/cbm manufactured by as ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge), minimum compressive strength of 50 n/Sq.mm, modulus of elasticity 850N/Sq.mm and resistance of spread of flame of class A category with property of being Termite/Borer Free. Water/Moisture proof, Fire Retardant and fixing with and including stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. Material test certificate and authentication should be complusary provided by the manufacturing company for Cabinate/Kitchen, cupboard and like including necessary frame, SS fancy type 125mm handle and magnetic catcher etc, after and including dismantling/removing of exsting boards of any type, all as specified & directed. |
| 91 | Material and labour for two coats of syanthetic enamel paint over one coat of red oxide primer on new and old steel surface incl preparation of surface over 10 cm width or girt completed all as specified and directed by Engr-in-charge |
| 92 | M&L for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of zinc crome primer (by spraying) all as specified & directed |
| 93 | M&L for preparation of old wooden surfaces of any description,not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of white primer (by spraying) all as specified & directed |
| 94 | S&F in repair for 600x450 mm looking mirror of selected quality glass 4 mm thick mounted on wall and fixed to plugs with chromium plated brass screws and cup washers, complete all as specified & directed Please Enable Macros to View BoQ information |
