|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Providing and Laying of Stone Soling hand packed including ramming, dressing and watering etc. with all cost and carriage of materials upto site of work complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 6 | Providing and fixing prefabricated structure excluding cost of beams, columns etc structural steel having following specification wall panells 60mm thick with 0.63mmhard diped galvanised steel sheets on both sides with 60mm thick layers of ridged CFC Free close cell polyurethene fom.ceiling panells 40mm thick made 0.63mm thick hard dipped galvanised steel sheets on both sides with 40mm thick layers of ridged CFC free close cell polyurethene fom including carraige and head load complete as per the directions of Incharge Engineer. |
| 7 | Providing and fixing of glazing fro aluminium doors, windows and ventelator glass panes of 5mm thick indluding cost of gaskets, beadings and other necessary fittings/fixtures and carriage of materials/ headload upto site of work complete as per the direction of Incharge Engineer. |
| 8 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position angles/ flats/ tubles including fixing of 2mm MS sheet in Door shutters including framework and applying a priming coat of approved steel primer and paint all complete. |
| 9 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses but including cost of Hips, ridges and valleys and cutting to size and shape wherever required inclusive of all carriages/ headload upto site of work complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 10 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. |
| 11 | Providing and Laying of cement concrete rings 3' wide in soakage pit, septic tank including tank including excavation and a cover slab including cost of carriage by M.T and H.L all complete job. |
| 12 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 13 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing to 2mm OD(SDR) job including necessary PPR Fittings |
| 14 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 15 | Providing, Fixing, Testing and Commissioning of PVC SWR pipes jointed with approved solvent cement fixed to walls and ceiling including angle supports with clamps complete including cutting holes in RCC brick work and making good the floor beams and walls cement mortar wherever required complete of outer diameter. Type-B including all necessary fittings and fixtures complete as per the directions of Incharge Engineer. 100mm dia PVC pipe |
| 16 | Providing, Fixing, Testing and Commissioning of PVC SWR pipes jointed with approved solvent cement fixed to walls and ceiling including angle supports with clamps complete including cutting holes in RCC brick work and making good the floor beams and walls cement mortar wherever required complete of outer diameter. Type-B including all necessary fittings and fixtures complete as per the directions of Incharge Engineer. 75mm dia PVC pipe |
| 17 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 18 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 19 | Providing and fixing of C.P connections of approved brand and make. |
| 20 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 21 | Providing and fixing of fully, floor nanahi trape including 100mm sand cast iron grating for gully trap. |
| 22 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore |
| 23 | Carriage of materials by MT. |
| 24 | Stone aggregate for an average lead of 5Kms |
| 25 | Sand for an average lead of 5Kms |
| 26 | Carriage of materials by head load for an average lead of 1000 meters. |
| 27 | Stone aggregate |
| 28 | Sand Please Enable Macros to View BoQ information |
