|
| 1 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. including M&L for rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:4 finished even and smooth (without using extra lime or cement) with and including preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat white cement primer complete all as specified and as directed. Note :- Cost of scaffolding and its removal is deemed to be included in unit rate quoted. |
| 2 | Taking down/Dismantling of wrought iron or mild steel work of any description not otherwise proveded for complete all as specifed and directed. |
| 3 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish to out side of MD land and M&L for brick work with well burnt old size bricks built in cement mortar 1:4 straight or curved on plan exceeding 6mtr mean radius complete all as specifed and directed. |
| 4 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:4 finished even and smooth (without using extra cement) with and including preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat white cement primer complete all as specified and as directed. Note :- Cost of scaffolding and its removal is deemed to be included in unit rate quoted. |
| 5 | Demolition of cement Concrete of any description and in any position including M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges , copings, kneelers, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, Type B-0 1:2:4 (12.5mm graded aggregate) with use and waste of form work complete all as specifed and directed. |
| 6 | Demolition of cement Concrete of any description and in any position including M&L For Cement concrete in foundations, filling and mass concrete Type B2, 1:2:4 (40 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, boundary pillars and posts (including caps and bases) with use and waste of form work complete all as specifed and directed. |
| 7 | S&F for MS work for fencing post and struts made from angle iron and flat iron in any section including cutting tops to shape , drilling holes and notching for fixing of wires etc confirming to Fe -290 or Fe -330, with and incl necessary S&F nut and bolts of 12mm dia including washers of reqd length complete all as specifed and directed. |
| 8 | S&F in repair for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specifed and directed. |
| 9 | S&F in repair 610 mm dia punched tape concertina coil (effective dia 550mm at stretch length of coil 6M ) with two handle and spikes at both end of coil with dovetail clips 18 SWG, including razor wire 7 No, 6M lengteh of each wire medium size , barbed length 20mm width 14mm including 51 pins 128 nos of clips each coil including 230 gm/ sqm zinc coating on core wire complete all as specifide and directed. |
| 10 | M&L for preaparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer of any description, not otherwise described, over 10cm width or girth complete all as specified and directed. |
| 11 | Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, laying of pipes etc and getting out in soft/loose soil complete all as specified & directed. |
| 12 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed . |
| 13 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft / loose soil complete all as specified and directed . |
| 14 | M&L for PCC (1:4:8) type D-2 using ( 40mm graded stone aggregate ) as in foundations, filling and mass-concrete compete all as specified and directed. |
| 15 | M&L for RCC M-25 designe mix using 20 mm graded aggregate for raft foundation footing, base of cloums, plinth beams & mass concrete,complete all as specified and directed. |
| 16 | M&L for RCC designe mix using 20 mm graded aggregate for raft foundation footing, base of cloums, plinth beams & mass concrete, complete all as specified and directed. |
| 17 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed. |
| 18 | Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders compete all as specified and directed. |
| 19 | M&L for form work for foundatio footing , base of columns & plinth beams similar work vertical or batter complete all as specified and directed. |
| 20 | M&L for form work for side of pillars, posts, colums & similar works vertical or batter complete all as specified and directed. |
| 21 | M&L for old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified. Please Enable Macros to View BoQ information |
