|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 2 | Earth work in excavation by mechnical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), excavated soil and disposal of surplus excavated soil sa directed within a lead of 50 m including dressing of sides and ramming of bottoms. lift up to 1.5m including getting out the. |
| 3 | Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded ston ballast 40mm nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation DSR 4.1.8 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 150 landings, balconis, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derivedform natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 6 | Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications. |
| 7 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vonratory roller to achieve the desired density. complete as per clause-401. |
| 8 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 9 | Finishing walls with premium Acrylic smooth exterior paint with silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm) |
| 10 | 40 mm thick fine dressed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone DSR 11.29.1 |
| 11 | Extra for pre finished nosing in treads of steps of Kota stone sand stone slab. DSR 11.31 |
| 12 | Providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as per direction of Engineer-in-charge. 80 mm thick CC paver block of M-35 grade with approved colour design and pattern. |
| 13 | Supply and fixing of MS Iron railing 1.2 mtr high of approved design having vertical MS Iron pipe, 14 gauge of outer dia 41mm molded at rop at the inner dia 200mm connected together with MS pipe, 14 gauge of outer dia 25mm at three places 40mm long and at the clear distance from bottom 125mm filled also with 25mm outer dia pipe continuously total height of railing legs 970mm except outer legs which embedded minimum 125mm in the base with 1:2:4 CC of size 230x230x230 mm hole in base. The railing have also two plates of size 230x230 mm squire and circular 14 gauge plane sheet, squire plate weld double on legs and circular plate in between semi circular head as per attached drawing including cost of all material, labour and T&P etc. required for proper completion of work, and as per direction of E/I. |
| 14 | Supply and fixing of sand stone bench of approved size or as directed by engineer in charge complete. |
| 15 | Providing and displaying cycus revoluta in 35 cm challi, specimen, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the office-in-charge. |
| 16 | Providing and displaying area palm having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in 30 cm size of earthen pot/plastic pot. |
| 17 | Providing and displaying ficus benjamina (green) height 150-165 cm, bushy with healthy branches and lush green foliage in big size HDPE bag. |
| 18 | Providing and displaying of dracaena pendanus, well developed, having 6 to 8 suckers with healthy foliage in 25 cm size Earthen pot/plastic pot & as per direction of the officer-in-charge. |
| 19 | Providing and stacking of Alpinia Veriegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 20 | Providing and stacking of Duranta Golden, having ht. 15 to 20 cm bushy shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 21 | Providing and stacking of Iresine herbstii, of height 20 to 30 cm full of branches well developed in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 22 | Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flower buds in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. Please Enable Macros to View BoQ information |
