|
| 1 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm each layer in soft/loose soil complete all as specified and as directed. |
| 3 | Removing excavated surplus soil/material not exceeding 50 metre distance and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. |
| 4 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete etc, complete all as specified and as directed. |
| 5 | M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 6 | M&L for 15mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), surface finished even and fair including necessary scaffolding complete all as specified and as directed. |
| 7 | M&L for HDPE Double wall corrogated pipes,150 mm bore, SN-4 laid and jointed with collars complete all as specified and as directed. |
| 8 | M&L for 100mm thick concrete bed to drain pipes in cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed. |
| 9 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in surface channel, drain and manholes complete all as specified and as directed. |
| 10 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in benching, coping including necessary form work complete all as specified and as directed. |
| 11 | S&F grease separator made of Stainless Steel (SS-304), proven stability of 10 years, for below ground installation. Over all dimension (4'x2'x3'). Standard odour tight top cover of 600 mm dia. clear opening, inlet and outlet dia. of pipe DN150, with grease storage capacity of 165 L overall capacity 550 L, inlet and outlet pipe upto 1st manhole all as per manufacturer's instructions and as specified and directed by Engr-in-Charge. Note:- (i) The rate shall be deemed to be included for supply, inatallation and provided ten days training for operation, function, cleaning, refixing etc. (ii) The contractor is liable for servicing and maintenance of all parts of grease trap for smooth functioning for two years from certified date of completion. (iii) Service Engineer shall visit the plant every month till defect liability period and ensure smooth functioning without any extra cost to govt. |
| 12 | M&L for preparing of new surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. |
| 13 | S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for Partition up to ceiling, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer in charge. |
| 14 | S&F Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations & other finishing color, thickness 9 mm, fixed with screws to timber/ aluminium/metal frame work up to ceiling all as specified and directed by Engineer in charge. |
| 15 | S&F door closer hydraulically regulated, aluminium die cast body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed, complete all as specified and directed. |
| 16 | S&F 5.5 mm thick sheet glass selected quality and glazing with aluminium/steel beadding in squares |
| 17 | S&F 150 mm long Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed |
| 18 | S&F 100 mm size aluminium handles, cast type anodised completed all as specified and directed. |
| 19 | S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanished mild steel hinges pin, anodized & fixed, type B-21 completed all as specified and directed |
| 20 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed. |
| 21 | S&F door seal of aluminium for doors of aluminium complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F of aluminium powder coated of any colour (thickness or powder coating not less than 50micron) doors shutters aluminium saction weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two nos in each door, hinges, anodised aluminium snap beading, screws complete all as specified. |
| 23 | S&F motice lock brass 4 leaves vertical type size of 100 mm with 3 key complete all as specified and directed by Engr-in-Charge. |
| 24 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out in soft/loose soil incl returning filling in ramming earth in layers not exceeding 25cm, and removing surplus excavted soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point and making good surface. |
| 25 | M&L Plain Cement Concrete Type C2 1:3:6 using 40 mm graded stone aggrgate as in foundation filling and mass concrete complete all as specified and as directed. |
| 26 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 Complete all as specified & directed. |
| 27 | S&F steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (hollow tube, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 (Gde E165) Complete all as specified & directed. |
| 28 | S&F framed work as in gusset plate for framed truss, rafters, rails braces etc complete, drilling for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fitting etc with welded, riveted or bolted of Fe-410 Gde 250A complete all as specified and as directed. |
| 29 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. |
| 30 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified. |
| 31 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer |
| 32 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radious built in CM (1:4 ) complete all as specified and directed. |
| 33 | M&L Hardcore of broken stone and boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 34 | M&L 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed. |
| 35 | M&L complete for wiring with cable of size 4.0 Sqmm single core copper multistrand conductor including continuous earth wire of 1.5 Sqmm, using cable FRLS insulated (unsheathed) 1100 volts grade conforming to IS-694 drawn in to and including concealed PVC rigid conduit medium duty with all fittings and fixing accessories ISI certified IS 9537 part -3 and terminated in to pressed steel metal flush boxes suitable for modular accessories and including modular cover plates with frame for mounting switches, socket regulator, brackets etc and including necessary cement work complete all as directed by the Engr-in-charge including cutting chases pinning in making good to facing and pointing in cement moter 1:3 to the ends or cutting chases for concealed conduit point wiring and making good disturbed surface complete. Cutting not exc 4 cm girth and 4cm width for hot / cooling appliances. |
| 36 | S & F of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. including elecectric connections complete all as specified and directed by Engr-in-charge. |
| 37 | Supply, installation, commissioning of Metal Top Deep Freezer single phase 240 volt, 50 Hz of capacity 405/ 425 Ltr including suitable size of MS angle stand, necessary accessories and electric connections complete all as specified and directed by Engr-in-charge. |
| 38 | Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity 60/120 Ltrs including suitable size of MS angle stand, necessary accessories and electric connections complete all as specified and directed by Engr-in-charge. |
| 39 | S & F for single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 Amp MCB including electric connection complete all as specified and directed by Engr-in-charge. |
| 40 | S & F for single pole and neutral enclosure with a two pin and earth plug and socket complete with one 10 Amp MCB including electric connection complete all as specified and directed by Engr-in-charge. |
| 41 | M&L complete for wiring with cable of size 1.5 Sqmm single core copper multistrand conductor including continuous earth wire, using cable FRLS insulated (unsheathed) 1100 volts grade conforming to IS-694 drawn in to and including concealed PVC rigid conduit medium duty with all fittings and fixing accessories ISI certified IS 9537 part -3 and terminated in to pressed steel metal flush boxes suitable for modular accessories and including modular cover plates with frame for mounting switches, socket regulator, brackets etc and including necessary cement work complete all as directed by the Engr-in-charge including cutting chases pinning in making good to facing and pointing in cement moter 1:3 to the ends or cutting chases for concealed conduit point wiring and making good disturbed surface complete. Cutting not exc 4 cm girth and 4cm width for hot / cooling appliances. |
| 42 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 43 | M&L Complete For modular switch one way 6 amps 1 module . |
| 44 | M & L complete for sub main wiring with single core copper multi strand conductor FRLS flexible insulated (unsheathed) cable of size 2 x 2.5 Sq mm and 1 x 2.5 Sq mm as in continuous earth wire drawn in to & including pvc conduit medium 25mm dia ISI marked complete with fittings and fixings accessories laid concealed complete and including necessary cement work complete all as directed by the Engr in charge including cutting chases pinning in making good to facing and pointing in cement moter 1:3 to the ends or cutting chases for concealed conduit sub main wiring and making good disturbed surface complete. Cutting not exc 4cm girth and 4cm width. |
| 45 | S&F for Mushroom LED Bollard 16 watt warm white of new generation, energy saving, environmental friendly, long life aesthetically designed IP 54 die-cast aluminium landscape luminaire for downward lighting with high power LED as light source with 1.2 mtr of post including necessary connection complete all as specified and directed by Engr-in-charge. |
| 46 | S & F in replacement of non transparent looping SMC kiosks pole box single phase of size 150 x 150 x 150 mm made out of engineering plastic one piece moulding Siemens grey colour with hold fast including 2 Nos of aluminium strips 10 amp of required size fixed on unbreakable insulator and one No of single pole MCB 1 to 6 Amp, C curve including taking out of old unserviceable complete all as specified and as directed by Engr-in-Charge. |
| 47 | Supply and fixing SPN 63 amp rating 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the existing panel complete with connection testing and commissioning all as specified and directed by Engr-in-Charge. |
| 48 | Supply and lay or fixing or passing in replacement through pipe cable XLPE (FRLS) with aluminium conductor with heavy duty stranded 1100 volts size of 04 Sqmm 2 Core IS-7098 including associated works complete all as specified and directed by Engr-in-Charge. |
| 49 | M&L for sand cushioning in trenches for protection of LT underground cable including watering and consolidation complete all as specified and directed by Engr-in-charge. |
| 50 | Supply and laying well burnt sub class ‘B’ bricks, locally available of size 23x11.5x7.5 CM (+_8% tolerance) in trenches for protection of underground cable complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
