|
| 1 | DSR item No.1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 2 | 3 x 1.5 sq. mm |
| 3 | DSR Item No.5.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. |
| 4 | DSR item No.5.7 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 5 | DSR item No.15.15 Supplying and laying of following sizeDWC HDPE pipe ISImarkedalongwithallaccessorieslikesocket,bend,couplers etc.conforming toIS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. |
| 6 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 7 | Labour charges for horizontal boring 1 Mtr. below ground level including cost of 2 Nos. pit digging and refilling complete in all respect to the entire satisfaction of EIC. |
| 8 | DSR item No.15.16 SupplyingandlayingoffollowingsizeDWCHDPEpipeISI markedalongwithallaccessorieslikesocket,bend,couplers etc.conforming toIS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioningandprotectivecoveringetc.,completeasrequired. |
| 9 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 10 | Fabrication, Supply & Erection of G.I. Pipe Bracket (Medium Class) I.S.I. marked of 1¼”dia 0.9 Mtr. long welded with 2.5” dia G.I. pipe 1’ long canopy with top end closed with 14 GMS sheet to avoid entry of rain water in the pole for erection of street light fittings on existing G.I pipe pole with suitable size nuts & bolts. (As per Complete Item No. 7 of the DNIT) |
| 11 | Single Arm G.I. Pipe bracket with 0.9 meter overhang |
| 12 | Single Arm G.I. Pipe bracket with 0.9 meter overhangS/E of Cement Collar and Jn. Box at the base of the pole with the detailed specification as given below., (As per Complete Item No. 8 of the DNIT) |
| 13 | Fabrication, Supply & Erection of 5 Mtr. Long G.I. Pipe Stepped Pole made out of 2.5” dia G.I. Pipe (3.5 Mtr. bottom) and 2” dia G.I pipe (1.5 Mtr. top) of B-Class ISI marked G.I. Pipe. The length of the overlap at joint should be 6” (minimum) (The cost of which is inclusive)., (As per Complete Item No. 9 of the DNIT) |
| 14 | Supply & Fixing of OEM Made GRP Timer Feeder Pillar of size 1075x850x320mm (Apprx.) or better, Glass-Fiber Reinforced Polyester SMC with Protection class IP 54 in accordance with IEC 60529 and Used for fabrication of Feeder Pillar boxes shall be made of out of insulating, slow-burning and self-extinguishing composite (polyester + glass fiber) characterized with resistance to atmospheric agents (UV)., (As per Complete Item No. 10 of the DNIT) |
| 15 | DSR item no. 8.13.3LEDStreet lightfixture, powdercoatedpressurediecast aluminium body (System lumen efficacy ≥120 <135 lm/Watt)Supplying,installation,Testing&CommissioningofStreet lightLEDfixturepowdercoatedpressurediecast aluminiumbodywith driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz,(As per Complete Item No. 11 of the DNIT) |
| 16 | 15 Watt |
| 17 | Supply and erection of sheet metal cubical pedestal of suitable dimensions made from 50 mm X 50 mm X 6 mm thick M.S angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides and front side hinged complete with locking arrangement with 4 Nos. (As per Complete Item No. 12 of the DNIT) |
| 18 | Cubical size 900 mm X 600 mm X 350 mm |
| 19 | Supply and Laying of XLPE insulated and PVC sheathed Al. Cond. Arm. & Served cable working voltage upto 1100 Volt. Grade conforming to IS 7090 (Part-I) 1988 (amended upto date) of following size to be laid in existing trench / pipe as required at site to the entire satisfaction of E.I.C. (As per Complete Item No. 13 of the DNIT) |
| 20 | Size 10 Sq.mm 4 Core XLPE Al. Arm. Cond. Cable |
| 21 | Size 16 Sq.mm 4 Core XLPE Al. Arm. Cond. Cable Please Enable Macros to View BoQ information |
