|
| 1 | Taking down and M&L for overhauling/ servicing of ceiling fan of any size / sweep (i.e 1200/1400mm sweep) and make,comprising of dismantling, cleaning internally and externally and cleaning / lubricating of bearing / bushes using fresh lubricant (Oil grease) re-assembling, checking of split pin, hook assembly & hanging and including provision of cable from ceiling rose or connector to fan and testing for proper functioning complete all as specified and as directed by Engr-in-Charge |
| 2 | All as per ser item No. 1.00 (here-in-before) but for exhaust fan of 225/300/380/450 mm sweep. |
| 3 | M&L for painting of ceiling fan/exhaust fans complete, in situ with one coat of synthetic enamel paint by spraying including filling cavities with filler, after cleaning all dust etc complete all as directed by Engr-in-Charge |
| 4 | S&F in repairs 1200mm BLDC 5 star ceiling fan with regulator enable motor power input 27 watt with 10% tolerance , motor insulation B type , 230-240V 50Hz AC supply 350 rpm , 225 CMM air delivery , service value minimum 7.4 , with complete set 3 blade , canopy, down rod , Shackle remaining all accessories including nut & bolt washer as required & directed .Note : Old Ceiling fan shall be deposited to MES Store of AGE E/M |
| 5 | S&F in repairs exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed. Note :Old Exhaust fan fan shall be deposited to MES Store of AGE E/M. |
| 6 | S&F in repairs exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers complete all as specified and as directed.Note :Old Exhaust fan fan shall be deposited to MES Store of AGE E/M. |
| 7 | S&F in repairs exhaust fan, heavy duty steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers complete all as specified and as directed.Note :Old Exhaust fan fan shall be deposited to MES Store of AGE E/M. |
| 8 | S&F in repairs Wall fan 600 mm air circulator, operating on 230V, 50 Hz single-phase supply, with a power input of 200W and current of 0.95A. The unit runs at a rated speed of 1440 RPM, delivering an air output of 16,000 m³/hr, service value 80m3/hr/watt, No of three blades complete all as specified and as directed. |
| 9 | S&F in repairs PVC Exhaust fan PVC 150 mm sweep single phase 50 Hz AC, air flow rate of 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified and directed by Engr-in-Charge.Note :Old Exhaust fan fan shall be deposited to MES Store of AGE E/M. |
| 10 | S&F in repairs PVC Exhaust fan PVC 200 mm sweep single phase 50 Hz AC, air flow rate of 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified and directed by Engr-in-Charge.Note :Old Exhaust fan fan shall be deposited to MES Store of AGE E/M. |
| 11 | S&F in repairs PVC Exhaust fan PVC 250 mm sweep single phase 50 Hz AC, air flow rate of 1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified and directed by Engr-in-Charge.Note :Old Exhaust fan fan shall be deposited to MES Store of AGE E/M. |
| 12 | S&F in repairs PCB board for exisiting BLDC ceiling fan any sweep and make complete all as specified and as directed. |
| 13 | S&F in repairs/replacement of stepped type electronic fan regulator flush type on the existing laminated sheet complete all as specified and as directed. |
| 14 | S&F in repairs modular fan step regulator, 120W - 2 modular complete all as specified and as directed. |
| 15 | S&F in repairs Fan capacitor of capacity 2.5 MFD complete all as specified and as directed. |
| 16 | S&F in repairs Ball bearing/Bush bearing suitable for ceiling fan, of any sweep. Make of bearing-TATA,NBC,SKF (6201 to 6204) complete all as specified and as directed. |
| 17 | S&F in repairs fan clamp MS including nut, bolt, rubber reel, split pin complete of suitable size 1200/1400 mm complete all as specified and as directed. |
| 18 | S&F in repairs PVC insulated domestic / industrial twin twisted copper conductor flexible wire with copper conductor 660/1100 volts grade of size 14/.0052 Sqmm wire comlete all as specified and as directed. |
| 19 | S&F in repairs top/bottom canopy suitable for ceiling fan of any sweep, make, model and type ,set of two comlete all as specified and as directed. |
| 20 | S&F in repairs down rod made out of GI tubing medium grade with both side thread & hole of 15mm two feet long comlete all as specified and as directed. |
| 21 | Supply , Fixing and testing in repairs of vertical type wall mounted storage water heater of Capacity 25Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technology * for inner tank with *incoloy heating element * with minimum * 4 years warranty , ABS outer body , 2 units of PVC connector pipe with length of 450mm length for hot and cold water supply with complete Accessories comlete all as specified and as directed. Note :Old geyser shall be deposited to MES Store of AGE E/M. |
| 22 | Supply and fixing in repairs Wall mounted fan 400 mm sweep PP Blade and thermal overload protection for long lasting motor power consumation 58 Watt fan motor speed 1330 RPM Air dilivery 85 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge.Note : Old Wall mounted fan shall be deposited to MES Store (AGE E/M) |
| 23 | Dismantling of storage type water heater (Geyser) of 25/35/50 ltrs capacity, any make, vertical or horizontal type, mounted on wall by disconnecting electric and water supply connection and keeping the same in safe custody for carrying out necessary repair/replacement of UNSV parts/components including descaling of the geyser tank by using proper liquid chemical and re-assambling & refixing the same all as directed by the Engr-in-Charge. Note: UNSV items for renewal shall be measured and paid seprately under respective itme here-in- after as supply only. |
| 24 | Supply only Heavy duty PK Aqua 2 feet hot water connection for geyser hose pipe both cold and hot (set of two) water line with adopter and washer at both ends of the pipe comlete all as specified and as directed. |
| 25 | Supply only Indicator lamp round/rectangular complete all as specified and as directed. |
| 26 | Supply only Thermostat for geyser 30 to 75 degree centigrade comlete all as specified and as directed. |
| 27 | Supply only Auto cut-off electric water heater geyser temperature controlling sensor any capacity complete all as specified and as directed. |
| 28 | Supply only Push type copper heating element of 1.5/2.0 KW capacity complete all as specified and as directed.. |
| 29 | Supply only Glass wool in between outer cell and containercomplete all as specified and as directed. |
| 30 | S&F in repairs Storage tank 25/50ltrs and including assemble with rubber, nuts, washers etc for geyser of capacity 25/50 ltr, any make any type complete all as specified and as directed. |
| 31 | S&F in repairs Switch socket combination 5 pin,15 Amp multipurpose complete all as specified and as directed. |
| 32 | S&F in repairs 15 Amp plug Top suitable for 15 amp socket complete all as specified and as directed. |
| 33 | S&F in repairs 2.5 Sqmm wire 3 Core for geyser connection complete all as specified and as directed. |
| 34 | Cleaning of geysers any type and size/make all as specified and directed by Engr-in-Charge. |
| 35 | S&F in repairs Element Assembly (Glass coated ) suitable 25 Ltrs (GL WH models) including taking down complete all as specified and as directed. Make : Bajaj or equivalent |
| 36 | S&F in repairs for clamp Bajaj/Havells/Crompton geyser for fixing of suitable size complete all as specified and directed. |
| 37 | S&F in repairs of metal fasteners of 12mm dia x100mm long for fixing geyser complete as specified and as directed. |
| 38 | S&F in repairs DBOXx MCB protected socket pvc plastic base of size 46.5 x42.8 x26 CM with single pole MCB SP 25 Amps complete all as specified and directed. Please Enable Macros to View BoQ information |
