|
| 1 | Civil Works |
| 2 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 3 | Scraping |
| 4 | Bricks dismantled from brick work in lime or cement. |
| 5 | Dismantling of brick work in cement sand mortar / lime mortar including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material. & staking the serviceable material with all lifts & lead of 100 metre (By Mechanical Means) lining |
| 6 | In cement |
| 7 | Shuttering for faces of concrete foundations and foundation beam & plinth beam(vertical or battering) |
| 8 | Centering and shuttering for columns (Square or rectangular or poly gonal in plain) |
| 9 | Centering and shuttering for sydes and soffits of beam, beams launchings girders bressumers,lintels |
| 10 | centering and shuttering for flat surfaces such as suspended floors,roofs,landings,shelves,etc. |
| 11 | Cement concrete 1:4:8 with 40 mm gauge stone ballast.using concrete mixer volumetric type 40 mm guage. |
| 12 | cement concrete 1:2:4 with stone ballast and shingle using conceret mixing volumetric type |
| 13 | Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforment centering and shuttering in superstructure |
| 14 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 15 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. |
| 16 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth |
| 17 | Providing and laying in super structure for first storey factory made with vibro-hydraulic compaction machine precast Hollow block of cement concrete setting in position with cement mortar 1:3 (1 cement:3 course sand ) including cost of hosting, centering and shuttering complete as per IS:2185 (Part-1): 2005. |
| 18 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 19 | 12.5mm thick cement plaster in C.M.1:4 |
| 20 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. |
| 21 | Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 22 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 23 | Applying priming coat with metal primer on new steel or iron work including preparation of surface |
| 24 | Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position. |
| 25 | Iron grated doors, including pintle hinges and arrangements |
| 26 | Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786- 2008, for R.C.C works, where not including in the |
| 27 | Providing and stretching barbed wire 3 ply including cost of winding wire & aluminium painting complete in all respects as per standard drawing |
| 28 | Providing and fixing angle iron pickets with angle 40mm x 40mm x 6mm including cost of concrete block and painting complete in all respects as per standard drawing |
| 29 | Carriage of malba from the site to the dumping ground complete in all respects. |
| 30 | Providing and fixing of Alumiumum doors (Size 3'-0\\"x 7'-0\\") with ventilator on top including cost of aluminium Angles, chowkats complete in all respects. |
| 31 | Providing and fixing ofAlumiumum doors with wire mesh (Size 3'-0\\"x 7'-0\\") including cost of aluminium Angles, chowkats complete in all respects. |
| 32 | Providing and fixing of Alumiumum window of size 3' x 3'6'' consisting of solid shutter with glass in panels complete in all respects. |
| 33 | Providing and fixing of Alumiumum window of size 5' x 3'6'' consisting of solid shutter with glass in panels complete in all respects. |
| 34 | Providing and fixing of Alumiumum window of size 2' x 3' consisting of solid shutter with glass in panels complete in all respects. |
| 35 | Providing and fixing of Alumiumum window of size 7' x 3' 6' 'consisting of solid shutter with glass and wire gague shutters in panels complete in all respects. |
| 36 | Public Health Services in Check Post |
| 37 | Screed of 50mm thick cement concrete 1:8:16 with stone aggregates to be laid below the topping using mechanical mixer for mixing of material |
| 38 | Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.) |
| 39 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 40 | Providing and laying Rectified Porcelin floor tiles 400x 400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring complete . |
| 41 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/ Semi Matt/ Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 42 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.), painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 43 | 15 mm i/d |
| 44 | 20 mm i/d |
| 45 | 25 mm i/d |
| 46 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 47 | 15 mm i/d G.I. Union |
| 48 | 20 mm i/d G.I. Union |
| 49 | 25 mm i/d G.I. Union |
| 50 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. |
| 51 | 20mm i/d Brass Ball valves |
| 52 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 53 | Through wall 22.86 cm thick |
| 54 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. |
| 55 | 110mm o/d pipe |
| 56 | Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per Cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. |
| 57 | Inside size 120x180 cm and 120 cm deep |
| 58 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. |
| 59 | Size 600mm x 900mm inside with RCC 455mm x 455mm cover and frame light duty double seal |
| 60 | Making connection of newly laid sewer in walls of existing manhole of fully charge sewer including cost of pluging sewer, desilting, removal of sullage water and making good of khudda |
| 61 | Sewer connection above 300 mm i/dand upto 700 mm i/d |
| 62 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 63 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. |
| 64 | With C.P. Brass nut |
| 65 | Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVC internal fitting, instead of 10 litres capacity PVC flushing cistern. |
| 66 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 67 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 68 | Size 550 mm x 400 mm x 815 mm |
| 69 | Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) instead of C.P. brass pillar tap complete in all respect. |
| 70 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. |
| 71 | Vitreous chinaware standard whitepedestal for wash hand basin. |
| 72 | Providing and fixing in position paper holders of approved make (to the approval of Engineer-in- charge) fixed in to wall with C.P brass screws complete in all respect. |
| 73 | C.P. brass toilet paper holder |
| 74 | Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. |
| 75 | C.P brass towel ring |
| 76 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-harge) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 77 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 78 | Size 600mmx450mm |
| 79 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 80 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge) with various fixtures complete in all respect. |
| 81 | C.P. Brass extension piece, 25mm long to 50mm long |
| 82 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete inall respect. |
| 83 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. |
| 84 | C.P. brass Bib cock foam flow without flange |
| 85 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 86 | C.P.brass 15mm Angle valve without flange |
| 87 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 88 | PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 89 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B |
| 90 | 110mm o/d SWR UPVC pipe lines laid complete |
| 91 | 90mm o/d SWR UPVC pipe lines laid complete |
| 92 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) |
| 93 | 110mm o/d |
| 94 | 90mm o/d |
| 95 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. |
| 96 | With 100mm x 75mm i/d Floor Trap(weighing 4.0 Kg) |
| 97 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 98 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 99 | For 110mm o/d pipes |
| 100 | Door Cap |
| 101 | Single Tee |
| 102 | Door Elbow 90 Degree (All side socketed) |
| 103 | Elbow 90 Degree (All side socketed) |
| 104 | Vent Cowls |
| 105 | Coupler |
| 106 | P Trap/Floor Trap 110mm x 75mm |
| 107 | Single Y-Junction |
| 108 | For 90mm o/d pipes |
| 109 | Single Tee |
| 110 | Door elbow 90 degree (all side socket) |
| 111 | Elbow 90 degree (all side socket) |
| 112 | Vent Cowls |
| 113 | Coupler |
| 114 | Single Y-Junction |
| 115 | Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete |
| 116 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 117 | Size 75 mm x 75 mm |
| 118 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. |
| 119 | G.I. tank nipple 20mm i/d |
| 120 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. |
| 121 | 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x330mm |
| 122 | Providing and fixing in position automatic brass Ball Cock in tanks. |
| 123 | Brass Ball Cock with rod and Plastic Ball |
| 124 | 20mm i/d |
| 125 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. |
| 126 | Triple Layer Tank |
| 127 | RCC Slab of side 9'-9\\" x 3'-0\\" including cost of material, centering and shuttering, labour, chasing in wall and all other work contingent thereto. |
| 128 | RCC Slab of side 12'-0\\" x 3'-0\\" including cost of material, centering and shuttering, labour, chasing in wall and all other work contingent thereto. |
| 129 | Credit for Old Material (Dismantled reusable Bricks) Please Enable Macros to View BoQ information |
