|
| 1 | Repair and maintenance of 5 HP / 7.5 HP Motor suitable for 2500 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 2 | Repair and maintenance of 10 HP / 12.5 HP Motor suitable for 5000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 3 | Repair and maintenance of 15 HP / 17.5 HP Motor suitable for 7500 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 4 | Repair and maintenance of 20 / 22.5 HP Motor suitable for 10000 GPH capacity submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC ( IS : 8783-1978 ) insulated electro grade copper ( IS : 613-1984 ) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 5 | Repair and maintenance of 2500 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 6 | i) Bronze/SS Impeller |
| 7 | ii)Bronze grade LTB 2/ cutless rubber bush |
| 8 | iii) Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 9 | iv)Stainless steel pumpshaft |
| 10 | v)Cast Iron grade (FG200) discharge casing. |
| 11 | vi)Cast Iron grade (FG200) Suction casing. |
| 12 | vii)Cast Iron grade (FG200) Pumbbowl/Diffuser |
| 13 | viii) SS Impeller lock. |
| 14 | ix) SS half coupling |
| 15 | x) stud bolt and nut |
| 16 | xi) Dismantling, repairing, reassembling, servicing |
| 17 | Repair and maintenance of 5000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 18 | i) Bronze/SS Impeller |
| 19 | ii)Bronze grade LTB 2/ cutless rubber bush |
| 20 | iii) Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 21 | iv)Stainless steel pumpshaft |
| 22 | v)Cast Iron grade (FG200) discharge casing. |
| 23 | vi)Cast Iron grade (FG200) Suction casing. |
| 24 | vii)Cast Iron grade (FG200) Pumbbowl/Diffuser |
| 25 | viii) SS Impeller lock. |
| 26 | ix) SS half coupling |
| 27 | x) stud bolt and nut |
| 28 | xi) Dismantling, repairing, reassembling, servicing |
| 29 | Repair and maintenance of 7500/10000 GPH capacity submerssible pump by complete dismantling including providing and fitting fixing of all necessary spare parts ( conforming to IS : 8034 ) and reassembling the same including machining, servicing & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 30 | i) Bronze/SS Impeller |
| 31 | ii)Bronze grade LTB 2/ cutless rubber bush |
| 32 | iii) Bronze grade LTB 2/12% chromium steel grade shaft sleeve |
| 33 | iv)Stainless steel pumpshaft |
| 34 | v)Cast Iron grade (FG200) discharge casing. |
| 35 | vi)Cast Iron grade (FG200) Suction casing. |
| 36 | vii)Cast Iron grade (FG200) Pumbbowl/Diffuser |
| 37 | viii) SS Impeller lock. |
| 38 | ix) SS half coupling |
| 39 | x) stud bolt and nut |
| 40 | xi) Dismantling, repairing, reassembling, servicing Please Enable Macros to View BoQ information |
