|
| 1 | Charges for lifting of pump, motor, column pipe etc. from intake well and stacking the same at suitable place as per specification and the direction of the Engineer-in-charge. |
| 2 | Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-incharge. |
| 3 | A) 1-1.5 HP pump motor set |
| 4 | Rewinding of Motor suitable V.T. pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-incharge. |
| 5 | a) 50-65 HP |
| 6 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.i) 75 HP/ 55 kw Relay range within 45-75 + 10% |
| 7 | Providing & fitting fixing with pvc insulated single core multistand copper cable conforming to IS: 694 for inter connection with all electrical equipments of the panel board as per specification & direction of the Engineer-in-charge. |
| 8 | i) 35sqmm |
| 9 | Repairing of V.T. pumps by providing and replacing of G.M. bush for bowel ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge. |
| 10 | i. for 40000 / 50000 GPH capacity V.T. pump |
| 11 | Repairing of V.T. pumps by providing and replacing of G.M. bush for suction case / discharge case ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge. |
| 12 | i. for 40000 / 50000 GPH capacity V.T. pump |
| 13 | Repairing of V.T. pumps by providing and replacing of Rubber bush for bowel ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge. |
| 14 | i. for 40000 / 50000 GPH capacity V.T. pump |
| 15 | Repairing of V.T. pumps by providing and replacing of bronze impeller ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge. |
| 16 | i.for 45000 / 50000 GPH capacity V.T. pump |
| 17 | Repairing of V.T. pumps by providing and replacing of MS lock ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge. |
| 18 | (i) For 40000 / 50000 GPH capacity V.T. pump |
| 19 | Repairing of V.T. pumps by providing and replacing of SS shaft ( SS-410) ) as per specification and the direction of the Engineer-in-charge. |
| 20 | i) for 40000 / 50000 GPH capacity V.T. Pump |
| 21 | Repairing of V.T. pumps by providing and replacing of Cl bowel case as per specification and the direction of the Engineer-in-charge. |
| 22 | i)for 40000 / 50000 GPH capacity V.T. Pump |
| 23 | Repairing of V.T. pumps by providing and replacing of Cl suction/discharge case as per specification and the direction of the Engineer-in-charge. |
| 24 | i) for 40000 / 50000 GPH capacity V.T. Pump |
| 25 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineerin-charge. |
| 26 | i) 200 amps |
| 27 | Providing and fitting fixing of Top shaft 25mm dia 8 ft length (FN-8). |
| 28 | Labour charge for lowering of V. T. pump motor with a column pipes of required depth in/c. fitting fixing of nuts & bolt and rubber insertion with making satisfactory trial run of pump motor etc complete as per direction of the Engineering-in-charge. |
| 29 | Providing and fitting fixing Worm Reduction Gearbox suitable to the low voltage AC TEFC squiral cage induction motor complete LNT/BCH/HAVELS/Siemens etc. make as per specification and direction of the Engineer-in-charge. |
| 30 | (i) Type 200A, Ratio 70/1 |
| 31 | Repairing top/line shaft of different capacity VT pump by welding, grinding, threading, centering as per specification and direction of engineer in charge. Please Enable Macros to View BoQ information |
