|
| 1 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 2 | Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000metres, stacking serviceable and unserviceable materials separately etc. complete. |
| 3 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. |
| 4 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to worksite, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401--Plant Mix Method and Grading - III Material |
| 5 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /bysuitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete. |
| 6 | PQC Providing and laying in-situ M40 Grade unreinforcemened plain cement contrete payment over a perpared sub base with 43 grade cement, coarse and fine aggregate (natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggreates combined gradation as per table 6000-3 of MORTHS pecification 2013, mixed in a batching and mixing plant/non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver, compacted and finished in a continuous operation, finishing to lines grade as directed by Engineer-in-charge abd curing compound/ by providing cement vatain cement Mortar 1:8 @ 0.6mx0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same through out curing period by any other method approved by Engineer-in-charge (Incluidng rates for separation membrane, Groove cuttings, Joint sealent-Polysulphate, Tie Bars & Dowel bars and steel etc. complete. |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite /quartzite /gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to beprovided and curing etc. complete, (Excluding reinforcement and structural steel). withully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 10 | Providing and laying Cast in situ/ReadyMix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footing sof R.C.C. column sand steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding rein forcement and structural steel) etc. complete, with fully automatic micro process or based PLCwith SCADA enabled reversible Drum Typemixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 11 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, bindingwith wires or tack welding and supporting as required complete |
| 12 | DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder VG-30 Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Sat attachment with Stone Dust filler. |
| 13 | BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm compacted thickness with specified grade of Bitumen, Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 14 | Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates) |
| 15 | Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete |
| 16 | Providing and fixing colour coated Zincalume( R ) AZ150 ( min 150 gms/sq.mt. total on each side) profiled sheets for roofing.The feed material is manufacture dout of nominal 0.45 mm Base Metal Thickness (BMT) (0.5mm TCT), Hi-strength steel with min. 550 M Payield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6%silicon) with COLORBOND (R)steel quality super durable polyester paint coat (with in organic pigment). The paint shall have a total coating thickness of nominal 35 um,comprising of nominal 25 umexterior coat on top surface and nominal 10 umreverse coat on back surface. Profile sheet shall havenom. 950 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five panat nominal 180-250 mm center-to-center. Theend rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details markeda regular interval. Including fastenerswithmin. fastenedwithmin. 25 umZinc-Tin alloy coated, Hex head, self-drilling screwetc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) |
| 17 | Providing and fixing valley gutter of 22B.W.G.(0.8mm)plain galvanised iron sheets 120 cm wide with teak wood planking 20mmthick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank). |
| 18 | Providing and fabricating structural steelwork in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and overit two coats of oilpainting of approved quality and shade etc. complete. |
| 19 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7mm confirming to I.S. 13592-1992 including proper rainwater receiving recesswithP.V.C. plug, bend, necessary fittings, suchas, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall afixing with clips of approved quality and One Number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes onC.C. ormasonry blocks, including necessary scaffolding and maintenance for 3 yrs forany leakages or dislocations of pipes.All theP.V.C. fitting sand additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 20 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt andother foreign matter and sand pape ring as required etc. complete. |
| 21 | Providing and applying two coats of synthetic enamel paint of approved colour to new/old structural steel work and wood work inbuildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete |
| 22 | Providing and constructing masonry in precast solid Concrete Block (GradeD-50 As per I.S. 2185, Part-I, 1974, Reframed 1987)having compressive strength 5-00 N/mm 2)of size (300mm x 200 mm x 150 mm) in cement mortar 1:6 for superstructure including striking joint sonunexposed faces, rackingout joint sonexposed faces, watering, curingand scaffolding etc. complete. |
| 23 | Providing sand faced plaster externally incementmortarusing approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 Kilo gram per cement bagcuring the same fornot lessthan2 days andkeeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mmthick incementmortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 24 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/ gneiss metal for coping to plinth or parapet, moulded or chamfered as perdrawing or as directed including steel centering, plywood/ steel formwork compacting,roughening themif special finish is to be provided, finishing un even and honey combed surface and curingetc. complete. The Cement Mortar 1:3 plaster is considered for rendering unevenand honeycombed surfaceonly. Newly laid concrete shall be covered by gunny bag,plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 25 | Providing and fixing mild steel grill gate with angle iron frame 65 mmx 65 mmx 10 mm with iron barsat 150 mm C/ Canddiagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. |
| 26 | Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective Paint) |
| 27 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metreas per drawing including fixtures, necessary welding and paintingwith one coats of anticorrosive paint and two coats of oil painting complete. |
| 28 | Providing and fixing bituminous pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete. |
| 29 | Providing and laying Cast in situ/ReadyMix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface orroughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic microp rocess or based PLC with SCADA enabled reversible Drum Typemixer / concrete Batchmix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 30 | Providing uncoursed rubblemasonryof trap / granite / quartzite / gneiss stones in cementmortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints onun exposed faces and watering etc.complete. Please Enable Macros to View BoQ information |
