|
| 1 | Taking down existing unserviceable point wiring of any type/ size of light/fan/socket/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area all as specified & directed. |
| 2 | Taking down the unserviceable MCB DBs & metal clad sockets of any capacity/any type complete all as specified and directed. |
| 3 | Taking down the unserviceable light fitting complete all as specified and directed . |
| 4 | Taking down the unserviceable MCB /MCCB of any rating and any size/type complete all as specified and directed. |
| 5 | Taking down old unserviceable sub main wiring of any size complete all as specified and directed. |
| 6 | Taking down unserviceable earthing material complete all as specified and directed. |
| 7 | M&L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated sheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches, sockets, fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw, cup washer etc. complete concealed in walls and provn of 1.5 Sqmm PVC insulated sheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch.Note:(i) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. |
| 8 | All as per Sl item No. 7 above but for One ceiling fan/exhaust fan point controlled by one switch through regulator |
| 9 | All as per Sl item No. 7 above, but for One 5 Amps socket outlet point on the independent board. |
| 10 | All as per Sl item No. 7 above, but for One 5 Amps socket outlet point on the same board. |
| 11 | All as per Sl item No. 7 here in before, but for One Bell point controlled by one, bell push. |
| 12 | All as per Sl item No. 7 above but for One light point controlled by two way switch |
| 13 | M&L for Point wiring complete with two runs of 2.5 Sq mm (for Phase and neutral) PVC insulated sheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches, sockets, fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw, cup washer etc. complete concealed in walls and provn of 2.5 Sqmm PVC insulated sheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one 15 Amps socket out let point.Note:(i) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. |
| 14 | M&L for Point wiring complete with two runs of 4 Sq mm (for Phase and neutral) PVC insulated sheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6 mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches, sockets, fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw, cup washer etc. complete concealed in walls and provn of 4 Sqmm PVC insulated sheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one 15 Amps socket out let point.Note:(i) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. |
| 15 | M&L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated sheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade , ISI marked, 20 mm bore with conduit accessories for Modular surface wiring mount on wall or fixed on ceiling/roof/truss/columns etc, including provision of branded modular PVC terminal box of suitable sizes with 1.6mm thickness including modular cover frame & box of suitable size for modular switch boards any size of modules for housing modular switches, sockets, fan regulators etc and provn of 1.5 Sqmm PVC insulated sheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch.Note: (i) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. |
| 16 | All as per Sl item No.15 here in before, but for One ceiling fan/exhaust fan point controlled by one switch through modular regulator. |
| 17 | All as per Sl item No.15 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent modular board . |
| 18 | All as per Sl item No.15 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same modular board. |
| 19 | All as per Sl item No.15 here in before, but for One Bell point controlled by one, one way modular switch 5 amps, SP |
| 20 | All as per Sl item No.15 here in before, but for One light point controlled by two 2 way modular switch 5 amps, SP |
| 21 | M & L for Point wiring complete with two runs of 2.5 Sq mm (for Phase and neutral) PVC insulated sheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade , ISI marked, 20 mm bore with conduit accessories for Modular surface wiring mount on wall or fixed on ceiling/roof/truss/columns etc, including provision of branded modular PVC terminal box of suitable sizes with 1.6mm thickness including modular cover frame & box of suitable size for modular switch boards any size of modules for housing modular switches, sockets etc and provn of 2.5 Sqmm PVC insulated sheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one 15 Amps socket out point independent boardNote:(i) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. |
| 22 | M & L for Point wiring complete with two runs of 4 Sq mm (for Phase and neutral) PVC insulated sheathed multi stranded ,copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade , ISI marked, 20 mm bore with conduit accessories for Modular surface wiring mount on wall or fixed on ceiling/roof/truss/columns etc, including provision of branded modular PVC terminal box of suitable sizes with 1.6mm thickness including modular cover frame & box of suitable size for modular switch boards any size of modules for housing modular switches, sockets etc and provn of 4 Sqmm PVC insulated sheathed copper conductor cable of green colour to common earth dolly etc.complete all as specified and as directed for one 15 Amps socket out point independent board.Note:(i) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. |
| 23 | M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated sheathed multi stranded ,copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC concealed conduit medium grade, ISI marked, 20 mm bore with conduit accessories for wiring concealed in wall, including provision of fabricated branded pressed steel terminal box concealed of suitable sizes with 1.6mm thickness including modular cover frame & box of suitable size for modular switch boards/sockets/regulators of any size modules for housing modular switches, sockets, fan regulators etc and provn of 1.5 Sqmm PVC insulated sheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch.Note:(i) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. |
| 24 | All as per Sl item No 23 here in before, but for One ceiling fan/exhaust fan point controlled by one switch through modular regulator. |
| 25 | All as per Sl item No. 23 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent modular board . |
| 26 | All as per Sl item No. 23 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same modular board. |
| 27 | All as per Sl item No. 23 here in before, but for One Bell point controlled by one, one way modular switch 5 amps, SP |
| 28 | All as per Sl item No. 23 here in before, but for One light point controlled by two 2 way modular switch 5 amps, SP |
| 29 | M & L for Point wiring complete with two runs of 2.5 Sq mm (for Phase and neutral) PVC insulated sheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC concealed conduit medium grade, ISI marked, 20 mm bore with conduit accessories for wiring concealed in wall, including provision of fabricated branded pressed steel terminal box concealed of suitable sizes with 1.6mm thickness including modular cover frame & box of suitable size for modular switch boards of any size modules for housing modular switches, sockets etc and provn of 2.5 Sqmm PVC insulated sheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one 15 Amps socket out point independent boardNote: The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. |
| 30 | M&L for point wiring in PVC casing & capping all as required at site of size confirming to IS 2079-1973 medium grade on surface with PVC insulated sheathed multistranded copper conductor cable (FRLS) 1.5 sqmm nominal cross sectional area 1100 volts grade with all fittings such as elbows, bends, junction boxes, saddles including PVC board (ISI Marked) and screws and rawal plug including 1.5 sqmm PVC insulated & unsheathed copper conductor cable as earth wire and connected to light/fan & common earth dolly with necessary copper thimbles complete all as specified and directed for One light/bell / Fan point controlled by one ,one way switch |
| 31 | All as per item No. 30 above but one socket outlet 5 pin 5/6 Amps on independent board controlled by one, one-way switch. |
| 32 | All as per item No. 30 above but one socket outlet 5 pin 5/6 Amps on same board with other one, one-way switch. |
| 33 | All as per item No. 30 above but for socket out let, 15/16 Amps on independent board with 4 Sqmm size cable and 2.5 Sqmm for continuity earth wire connected to common earth dolly complete all as specified and directed. |
| 34 | S & F switch piano single pole flush type 6 amps, 230 volts complete all as specified and as directed. |
| 35 | S & F switch piano single pole flush type 16 amps, 230 volts complete all as specified and as directed. |
| 36 | S & F single pole Modular switch 1 way 6 Amps, 1 Module complete all as specified and as directed. |
| 37 | S & F single pole Modular switch 1 way 16 Amps, 1 Module with red LED indicator complete all as specified and as directed. |
| 38 | S & F Switch piano two way flush type 6 Amps capacity 230 volts complete all as specified and as directed. |
| 39 | S & F Modular switch 2 way 6 Amps, 1 Module complete all as specified and as directed. |
| 40 | S & F bell push 5 A flush type complete all as specified and as directed. |
| 41 | S & F Modular Bell Push 6A, 1 Module with bell symbol complete all as specified and as directed. |
| 42 | S & F Socket modular type multipurpose 2/3 Pin, 6 amps, 230 volts 2 Module all as specified and directed. |
| 43 | S & F Socket modular type multipurpose 3/6 Pin, 16 amps, 230 volts 2 Module all as specified and directed. |
| 44 | S & F Socket flush type multipurpose 2 in 1, 3 Pin, 6 amps, 230 volts all as specified and as directed. |
| 45 | S & F Socket flush type multipurpose 2 in 1, 3/6 Pin, 16 amps, 230 volts all as specified and as directed. |
| 46 | S & F in repairs Modular ceiling fan regulator stepped socket size, 2 module suitable to work on 230 volts complete all as specified and as directed. |
| 47 | S&F in repairs Modular frames of any size, capacity of module configuration suitable existing switch boards up to 24 modules white colour 6/16Amps complete all as specified and as directed. |
| 48 | S & F in repairs Electronic type fan regulator socket type single module, suitable to work on 230 volts complete all as specified and as directed. |
| 49 | S&F in repairs calling bell ding dong working on 230 volts AC with different ring tones optional complete all as specified and as directed. |
| 50 | S & F in repairs ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed. |
| 51 | S & F in repairs lamp holder any angle suitable for LED Bulbs of capacity 7/15 watts insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and as directed. |
| 52 | S&F 3 in 1 LED 4 ft batten 20 Watt (warm white, Neutral white, cool white), aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated life 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 53 | S&F inverter LED 4 ft batten 20 Watt, 6500K with square profile and polycarbonate channel, lithium ION battery with charging time 8 Hours -10 Hours and backup time upto 4 hours indoor recess mounting with reflector and connector block complete all as specified and directed. |
| 54 | S&F 3 in 1 LED 4 ft batten 24 Watt, aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated life 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 55 | S&F LED batten light fitting 9 Watts 2 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 56 | S&F LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 57 | S&F LED luminaire 600 mm x 600 mm, 42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 58 | S&F surface type downlight circular/square 6 W, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 out door type metal body of suitable size complete all as specified and as directed. |
| 59 | S&F recess mounted downlight circular 12 W, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 out door type metal body of suitable size complete all as specified and as directed . |
| 60 | S&F LED light fitting 9Watts bulkhead luminaires, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 out door type metal body of suitable size complete all as specified and as directed. |
| 61 | S&F LED bed side reading light fitting, white/black powder coated housing with movable string, metallic base, complete with driver to operate on 240 V AC, 50 Hz complete all as specified and as directed. |
| 62 | S&F LED security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts, rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete suitable for pop/grid false ceiling in all respect complete all as specified and as directed. |
| 63 | S & F MCB SP 6 to 32 Amps 240 volts C type with rupturing capacity 10 KA all as specified and as directed. |
| 64 | S & F MCB SPN 40 to 63 Amps 240 volts C type with rupturing capacity 10 KA all as specified and as directed. |
| 65 | S & F MCB TPN, 63 Amps, rupturing capacity 10 KA 415 volts suitable for fixing in existing DB of any capacity complete all as specified and as directed. |
| 66 | S & F sheet metal enclosure MCB DB SPN 4 way double door with 100 amps rated aluminium bus bar 240 volts double door with locking system complete all as specified and as directed. |
| 67 | S & F sheet metal enclosure MCB DB SPN 8 way double door with 100 amps rated aluminium bus bar 240 volts double door with locking system complete all as specified and as directed. |
| 68 | S & F sheet metal enclosure MCB DB SPN 12 way double door with 100 amps rated aluminium bus bar 240 volts double door with locking system complete all as specified and as directed. |
| 69 | S & F TPN DB 4 way double door horizontal made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as specified and as directed. |
| 70 | S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed. |
| 71 | S&F MCCB 415V, 16KA, 100 amps 4 Pole, thermal magnetic release fixed type, short circuit and over load protection suitable for DB complete all as specified and as directed. |
| 72 | S&F MCCB 415V, 16KA, 63 amps 4 Pole thermal magnetic release fixed type,short circuit and over load protection suitable for DB complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 73 | S&F MCCB 415V, 16KA, 63 amps 4 Pole thermal magnetic release fixed type,short circuit and over load protection suitable for DB complete all as specified and as directed. Please Enable Macros to View BoQ information |
