|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Repair/Maint of fire detection, Fire Alarm panel, Sprinklers, Smoke Detectors, Fire Hydrants and Fire fighting system at CHNC under GE Utilities Udhampur Contract No: GE/U-16/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | M & L for rectification of complaint /defects of fire Detection,Alarm System and Fire Fighting System at CHNC udhampur, detection of nature of defect including carry out minor repairs, loose connection , change of small length of wire as required size to make the machine/equipment functional ,opening of switch board / panel board and refixing the same after necessary repair, etc complete all as specified and directed by Engineer-in-Charge.Note:- (a) The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the machine functional for minor repair. If replacements of parts / items is required to make the equipment/machine functional the cost of labour and material for the same shall be measured and paid for as \\" S & F in repairs/M & L in repairs \\" under relevant items of this schedule hereinafter and in that case this item shall not be measured. |
| 3 | S & F in repair fire hydrant 63 mm dia, single headed with flanged inlet and instantaneous out let on the existing stand post with brass nipple, including necessary bolts, nuts and washers including taking down unserviceable old one complete all as specified and directed by Engineer-in-Charge. |
| 4 | S & F in repair fire hydrant 63 mm dia, double headed with flanged inlet and instantaneous out let on the existing stand post with brass nipple, including necessary bolts, nuts and washers including taking down unserviceable old one complete all as specified and directed by Engineer-in-Charge. |
| 5 | S & F in repair female coupling 63mm dia for hydrant valve ISI marked including taking down old unserviceable one. |
| 6 | S & F in repair first aid hose reel, wall mounted swinging type complete with drum, bracket, globe valve/ stop cock of size 19 mm dia, 36mtr long high pressure hose reel tubing with branch pipe PVC shut off nozzle including taking down unserviceable old one , complete all as specified and directed by Engineer-in-Charge.Note :- Hose reell shall be as per IS 884 and hose tubing as per IS 8090 ; |
| 7 | Supply and fix in repair first aid hose reel nozzle valve type of size 19 mm, complete all as specified and directed by Engineer-in-Charge. |
| 8 | S & F in repair 15 Mtr long rubber lined woven jacketed hose pipe 63 mm dia, type A (Reinforced rubber lined) as per IS 636 with necessary instantaneous spring lock type coupling at the ends to match with landing valve/hose pipe/branch pipe with S/S male and female coupling conforming to IS 903 complete all as specified and directed by Engineer-in-Charge. |
| 9 | S & F in repair 30 Mtr long rubber lined woven jacketed hose pipe 63 mm dia, type A (Reinforced rubber lined) as per IS 636 with necessary instantaneous spring lock type coupling at the ends to match with landing valve/hose pipe/branch pipe with S/S male and female coupling conforming to IS 903 complete all as specified and directed by Engineer-in-Charge. |
| 10 | S & F in repair fabricated MS hose cabinet, made of 18 gauge MS sheet of double door with 3 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side brilliant white inside and including taking down unserviceable old one , complete all as specified and directed by Engineer-in-Charge. |
| 11 | S & F in repair 3 mm thick glass of suitable size for MS hose box standard size including taking down unserviceable old one complete all as specified and directed by Engineer-in-Charge. |
| 12 | S & F in repair 63 mm dia branch pipe instantaneous inlet and made 15 mm bore nozzle short complete all as specified and directed by Engineer-in-Charge. |
| 13 | S & F in repair Fire brigade inlet connection 4 way valve ISI marked including taking down unserviceable old one , complete all as specified and directed by Engineer-in-Charge. |
| 14 | S & F in repair Fire brigade inlet connection 2 way valve ISI marked including taking down unserviceable old one , complete all as specified and directed by Engineer-in-Charge. |
| 15 | S & F in repair of Pressure switch Universal type complete all as specified and directed by Engineer-in-Charge. Make : Danfoss / Indfoss /Honeywell |
| 16 | S & F in repair of Pressure Gauge, 100mm dia, 0 - 14 Kgs rating complete all as specified and directed by Engineer-in-Charge. Make : H Guru /Baumer/ Mass |
| 17 | S & F in repair of Air Cushioning Tank (Air vessel) 200mm dia x 1000mm high with dished top, made of minimum 6mm thick MS plate complete with 20mm dia. Brass air valve (ball type), 20mm dia stop valve, nipple tees elbows and all accessories complete all as specified and directed by Engineer-in-Charge. |
| 18 | S & F in repair of three pole power contactor suitable for main pumpset of capacity 40 HP to 60 HP complete all as specified and directed by Engineer-in-Charge. Make : L & T /ABB/GE |
| 19 | M&L for Painting to outer side of the existing feeder pillar board and pipe lines inside fire fighting installation by two coat of synthetic enamelled paint of existing colour after scrubbing and cleaning making the surface ready to paint and complete all as specified and directed by Engineer-in-Charge. |
| 20 | Description all as per item Ser No 18.00 here- in-before, but painting of pump set of any size complete all as specified and directed by Engineer-in-Charge. |
| 21 | Description all as per item Ser No 18.00 here- in-before, but painting of hose box complete all as specified and directed by Engineer-in-Charge. |
| 22 | Description all as per item Ser No 18.00 here- in-before, but painting of yard hydrant/Fire brigade point complete all as specified and directed by Engineer-in-Charge. |
| 23 | Description all as per item Ser No 18.00 here- in-before, but painting of fire fighting system pipe line of size complete all as specified and directed by Engineer-in-Charge. |
| 24 | 80 mm |
| 25 | 100 mm |
| 26 | 150 mm |
| 27 | 200 mm |
| 28 | M&L in repair of worn out Gland Packing of pump set / sluice valves / hydrants any make / metal / size including washers of any shape / size to avoid water leakage as indicated including taking out old one complete all as specified and directed by Engineer-in-Charge. |
| 29 | M & L for cleaning of Detectors/ MCP/ Hooter any type in any height as and when required with air blower for making all detection system healthy in any type of building inside CHNC udhampur. |
| 30 | M & L for testing of functionality of Fire Alarm System in quarterly or as and when directed by Engr- in-Charge by random check of devices by artificial smoke and other testing measures in any type of building complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L in repair for Reprograming of Existing fire alarm system installed at Various Locatioin including loope Checking, Changing of Device Location Name and Address of the Room and preparing as build Drawing all complete all as specified and directed by Engineer-in-Charge. |
| 32 | S & F in repair of power supply unit / SMPS for Fire Alarm Control Panel any type and make complete all as specified and directed by Engineer-in-Charge. |
| 33 | S & F in repair 12 V 7/12AH Battery complete all as specified and directed by Engineer-in-Charge. |
| 34 | S & F in repair 1000 VA UPS complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply and fix in repair CI sight glass 50mm dia, complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply and fix in repair bronze ball valve 50mm dia , complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply and fix in repair intelligent interface adressable monitor module for fire alaram system , complete all as specified and directed by Engineer-in-Charge. (Make HTRI -Siemens) |
| 38 | Supply and fix in repairs 300Watt power supply desigo FACPs and IVC sustem in fire alaram panel complete all as specified and directed by Engineer-in-Charge. (Make Siemens Model FP2012 -U11) |
| 39 | Material & labour for DPU(Device programmer/test unit to perform loop testing and ground fault detection complete all as specified and directed by Engineer-in-Charge. (Make Siemens) |
| 40 | Material & labour for quarterly checking for Intelligent addressable Micro processor based fire alarm control panel with 02 loop capacity Networkable and expandable, with dual stage alarm facilities like hooter, fire / fault indicators, audio-visual signals, auto learn features, flexibility in shared zone mode or stand alone system, PC networking connectivity as RS232/RS485, communication facility, suitable for connect other systems. shall be interfaced to Graphic Software, having inbuilt power supply. |
| 41 | Material & labour wiring for circuit / submain wiring along with earth wire with the cable FR LS, PVC insulated, un sheathed, copper conductor, multistranded, 1100 volts grade single core cables drawn through and including ERW steel conduit and conduit accessories surface / concealed in walls all as specified of size 2 x 1.5 Sq mm + 1 x 1.0 Sq mm for Smoke / fire detectors. complete all as specified and directed by Engineer-in-Charge. |
| 42 | S & F in repair 12 Volt 70 AH Self Charging Battery for Diesel Pump set , complete all as specified and directed by Engineer-in-Charge. |
| 43 | Repair single/double headed outlet hydrant valve 100mm having 65mm outlet with lock pin wheel complete all as specified and directed by Engineer-in-Charge. |
| 44 | Checking of Pre charged Air vessel including servicing, greasing, overhauling, tightening of nut bolts and other spares as required shall be inclusive in the quoted rate. Maintain and ensure for proper working condition and ready for operation and including. |
| 45 | Supply and fixing hose reel drum with handle suitable for hold 30 mtr hose pipe complete all as specified and directed by Engineer-in-Charge. |
| 46 | Material and labour for cutting existing MS pipe of bore 80mm to 150mm size and jointing with proper welding and testing of all fittings complete with all welding/threading works and jointing material laid in trenches/ on surface / slopes/ pillars/ culverts includind necessary earth work etc. complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply and fixing in replacement of cast iron sluice valve of size 150 mm (PN 1.6) (ISI Marked) with iron wheel head, both end flanged, stainless steel spindle, non rising type complete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc.including taking down old unsv complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply and fixing in replacement of cast iron non return valve, conforming to IS-5312, suitable for 150 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk including taking down old unsv complete all as specified and directed by Engineer-in-Charge. |
| 49 | Material and labour of cross arms ,bracings,supports,clamp and back plate fabicated from structural steel sections,including nut and bolts, washers welding bend or cold or hot,drilling holes for bolt in any shape or size indicated or direcected and inclusive of one primer coat,one under coat and one finishing coat all complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply, laying, jointing and testing ERW MS pipe class 'B' pipe 150 mm bore having wall thickness 6mm with permissible tolerance + 10%, pipe shall be confirming to IS-3589, IS marked and steel grade of Fe-410 along with joints (As per site requirements) and taking down of old unserviciable pipe. laid in trenches/along road/on surfaces/slopes/pillars/culverts/causeways etc. complete all as specified and directed by Engineer-in-Charge. |
| 51 | Description all as per serial item No 45.00 here-in-before, but of size 100 mm bore. |
| 52 | Description all as per serial item No 45.00 here-in-before, but of size 65 mm bore. |
| 53 | Description all as per serial item No 45.00 here-in-before, but of size 50 mm bore. |
| 54 | Description all as per serial item No 45.00 here-in-before, but of size 40 mm bore. |
| 55 | Description all as per serial item No 45.00 here-in-before, but of size 32 mm bore. |
| 56 | Description all as per serial item No 45.00 here-in-before, but of size 25 mm bore. |
| 57 | Supply and fixing in replacement of butterfly valve of size 150 mm (PN 1.6) (ISI Marked) gtype complete with neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc.including taking down old unsv complete all as specified and directed by Engineer-in-Charge. |
| 58 | Repair to old sluice valve/butter fly valve of sizes 100 to 150mm for check nut, refacing, regrinding & refixing at its original location including cleaning, repacking stuffing box of sluice valve & spindle including fixing & testing complete all as specified and directed by Engineer-in-Charge. |
| 59 | Repair to old non return valve of sizes 100 to 150mm for check nut, refacing, regrinding & refixing at its original location including cleaning, repacking stuffing box of non return valve including fixing & testing complete all as specified and directed by Engineer-in-Charge. |
| 60 | Disconnecting electric connection of motor upto 60 HP removing the unserviciable motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same. complete all as specified and directed by Engineer-in-Charge.Note: (a) Rewinding of motor will be measured and paid separately under relevent item.(b) The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed by Engineer-in-Charge. |
| 61 | Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class'B' paper insulation inside the slots, rewinding the motor of capacity 10 HP with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time. Note:- Cost of labour for winding deemed to be included in the rate quoted. Make : Atlas/Devi Dayal or equivalent make approved by GE. |
| 62 | Supply and fixing self lubricated asbestos non metallic and non graphite gland packing of sizes 8 to 12 mm complete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply and fixing in replacement of foot valve flanged end IS 4038, PN 0.2 , CI housing,door plate,strainer,fasteners of size 150 mm dia etc complete all as specified and directed by Engineer-in-Charge. |
| 64 | Material and labour for cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in foundation, filling and mass concrete for providing support for Base frame with MS bolts placed in concrete finishing even and fair without using extra cement including demolition complete all as specified and directed by Engineer-in-Charge.Note: Location and size of bolts should match as per the previous concrete supporting blocks. |
| 65 | Decoupling, disconnecting suction line and discharge line taking down from foundation, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets and taking to workshop (if reqd) for repairs. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line realignment commissioning and testing in respect of centrifugal/multistage pump of capacity upto 15 HP complete all as specified and directed by Engineer-in-Charge.Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of parts shall be measured and paid separately under respective item of sch A. |
| 66 | Supply only parts in repair for single/multistage pumps of capacity 15 HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engineer-in-Charge. |
| 67 | Pump impeller made out of stainless steel or as per existing specification. |
| 68 | Pump shaft stainless steel shaft complete with check nut and keys. |
| 69 | Tyre coupling/star coupling or as per existing at site. |
| 70 | Gland cup. |
| 71 | Shaft sleeves. |
| 72 | Welding remelting and turning finishing cutting of key ways in respect of pump shaft. |
| 73 | Bearing housing. |
| 74 | Pump Casing CI cover suitable for 10HP of different makes |
| 75 | Decoupling, disconnecting suction line and discharge line taking down from foundation, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets and taking to workshop (if reqd) for repairs. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line realignment commissioning and testing in respect of centrifugal/multistage pump of capacity upto 60 HP complete all as specified and directed by Engineer-in-Charge.Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of parts shall be measured and paid separately under respective item of sch A. |
| 76 | Supply only parts in repair for single/multistage pumps of capacity 65 HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engineer-in-Charge.Make-Kirloskar/CG/Mather platt. |
| 77 | Pump impeller made out of stainless steel or as per existing specification, Make : Kirloskar/Wilo Mather Platt or equivalent make as approved by GE. |
| 78 | Pump shaft stainless steel shaft complete with check nut and keys. |
| 79 | Tyre coupling/star coupling or as per existing at site. |
| 80 | Gland cup. |
| 81 | Shaft sleeves. |
| 82 | Welding remelting and turning finishing cutting of key ways in respect of pump shaft. |
| 83 | Bearing housing. |
| 84 | Material & labour for quarterly checking for fire sprinkler /Fire alaram system installed at NCHNC by checking the flow of water through the line, flow switch, gong bell, draining the line etc any leakages found may be rectified and testing functioning and submitting the fire inspector report once in a year complete all as specified and directed by Engineer-in-Charge. |
| 85 | Material & labour for quarterly checking for fire hydrant (Single/Double,External/Internal) system installed at NCHNC by checking the pressure of water through the line, leakages found may be rectified and testing function of RRL hose nozzle and submitting fire inspector report once in a year complete all as specified and directed by Engineer-in-Charge. |
| 86 | Material & Labour for replacement of fire hydrant tikkri suitable for 63mm fire hydrant valve complete all as specified and directed by Engineer-in-Charge. |
| 87 | Material & Labour for replacement of fire hydrant rubber washer suitable for 63mm fire hydrant valve complete all as specified and directed by Engineer-in-Charge. |
| 88 | Material & labour for servicing of diesiel engine driven fire hydrant pump with draining out of engine oil and top up with new oli and replacement of oil filters, fuel filter ,air filter and topping up with new coolant, tightening of all nut and bolt complete all as specified and directed by Engineer-in-Charge. |
| 89 | Material & labour for serviceability of fire panel( Main, Jockey & DG) installed at NCHNC with checking of auto/Mannual mode for its operation of required pressue for the auto operation of pump, checking the working of relays/ contactor and tightening the loose contact if any and replacement of lugs, note dowm the the cut off/on pressure rating of each pump and submitted to the department complete all as specified and directed by Engineer-in-Charge. |
| 90 | Supply, erection testing & commissioning of pot strainer / Y strainer including rubber insertion, bolts, nuts, Gl flanges, etc complete for 150mm bore of pipes, complete all as specified and directed by Engineer-in-Charge. |
| 91 | Description all as per Ser Item No 78.00 here-in-before, but of size 100 mm bore. |
| 92 | Supply erection, testing and commissioning of hydraulically operated sprinkler alarm unit connected to sprinkler system (150 mm dia) floor comprising of alarm valve, water motor with alarm gong, pressure gauge, drain cock, check valve and pressure reducing valve. The quoted rate shall also including the necessary accessories, complete all as specified and directed by Engineer-in-Charge. |
| 93 | suppy & fix in repair flow switch installed on the sprinkler main distribution line connected to the main sprinkler annunciation panel located in the ground floor suitable for 100mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 94 | Supply & fixing Intelligent addressable Optical Based smoke and heat detector with facility of numbering in the base( UL Listed) complete all as specified and directed by Engineer-in-Charge. |
| 95 | Supply & fixing Intelligent addressable Manual Pull Station and shall be resettable type.( UL Listed) complete all as specified and directed by Engineer-in-Charge. |
| 96 | Material & labour for response Indicator (uL ) listed complete all as specified and directed by Engineer-in-Charge. |
| 97 | Supply & fixing 2 Core X 1.5 Sq.mm multistrand armoured copper cable with all accessories and 2 complete in all aspects, the cable shall be having cable pointers at every 1 Meter. These cables shall be used for the wiring of detectors and devices. |
| 98 | Material & labour for duct detector (uL ) listed complete all as specified and directed by Engineer-in-Charge. |
| 99 | Material & labour for electonic hooter complete all as specified and directed by Engineer-in-Charge. |
| 100 | Material & labour for fault isolation module complete all as specified and directed by Engineer-in-Charge. |
| 101 | Material & labour for providing and fixing of 12mm / 15mm dia anchor fasteners for suspending Gl rods / brackets etc |
| 102 | Supply.erection, testing and commissioning of 15mm dia nominal bore quartzoid bulb type sprinklers with temperature rating of 68 deg C conventional type the shall also include suspending arrangement with ceiling, wall arrangement with ceiling, wall beam clamps, fasteners ceiling rosette (incase of false ceiling) etc.,complete all as specified and directed by Engineer-in-Charge. |
| 103 | Concealed type |
| 104 | Upright type |
| 105 | Sidewall type |
| 106 | Pendant type |
| 107 | Supply, Erection, testing & comissioning of SS Flexible Pipe of suitable dia and length required for connecting complete all as specified and directed by Engineer-in-Charge. |
| 108 | Supply and fix in replacement of gun-metal, gate valves, 50mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing complete all as specified and directed by Engineer-in-Charge. |
| 109 | Supply and fix in replacement of gun-metal, globe or gate valves, 25 mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing complete all as specified and directed by Engineer-in-Charge. |
| 110 | Supply & fix Luminous inverter 900VA/12 Volt,Battery Combo(Icon 1100 pure sine wave inverter,RC 25000, 200 Ah tail tubular battery 200 VA/12 V, white standard (icon 1100_RC 25000) complete all as specified and directed by Engineer-in-Charge. |
| 111 | LED lit laser etched fire exit sign complete with maintenance free battery of atleat1.5 hr duration with chrome finish of existing size of single sided complete all as specified and directed by Engineer-in-Charge. |
| 112 | LED lit laser etched fire exit sign complete with maintenance free battery of atleat1.5 hr duration with chrome finish of existing size of double sided complete all as specified and directed by Engineer-in-Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
