|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Repair/Maint of various mechanical installations including laundry plant at CHNC under GE Utilities Udhampur Contract No: GE/U-19/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | M&L for servicing/repair of Washer Extractor upto 100 Kg capacity - 03 Nos of Make : Fabcare including opening, dismantling of the machine, disconnecting all steam / water and electrical connection, cleaning / servicing of drum, balancing/alignment of drum & shaft cleaning, steam trap, servicing/ lubricating/greasing and adjusting the mechanical and electrical driving equipment, shaft assembly, bearing / bush, in and including change of lubricating oil,grease,all rubber gaskets/ packing of all equipments and oil seales as per OEM make and replacement of all kinds of minor defective / spares parts i.e. wire, lugs, nut, bolts,screw etc and all machine work i.e. welding, cutting, drilling, lathe work etc in and including repair/replacement of defective spares parts complete all as specified and directed by Engineer-in-Charge. |
| 3 | Note: 1. The parts replaced shall be measured seperately under relevent item.2. Any other defective part or part which is likely to fail and not present in schedule and need to be replaced for making machine serviceable for proper operation shall be replaced by contractor at no extra cost and cost of item is deemed to be included in quoted rate.3. Cost of taking out drum for correcting the alignment and balancing is deemed to be included in quoted rates.4. Cost of T&P and transportation is deemend to be incuded in quoted rates.5. If any defect occur till next service during CA period then contractor will carry out repair and replace the defective part of machine at no extra cost. |
| 4 | M&L for servicing/repair of Washer Extractor cum Dry cleaner upto 60 Kg/ Dry Cleaner -02 Nos capacity of Make : Super shine including opening, dismantling of the machine, disconnecting all steam / water and electrical connection, cleaning / servicing of drum, steam trap, servicing/ lubricating/greasing and adjusting the mechanical and electrical driving equipment, shaft assembly, bearing / contact, governor jaws in and including change of lubricating oil,grease,all rubber gaskets/ packing of all equipments and oil seales as per OEM make and replacement of all kinds of minor defective / spares parts i.e. wire, lugs, nut, bolts,screw etc and all machine work i.e. welding, cutting, drilling, lathe work etc in and including repair/replacement of defective spares parts complete all as specified and directed by Engineer-in-Charge. |
| 5 | Note: 1. The parts replaced shall be measured seperately under relevent item.2. Any other defective part or part which is likely to fail and not present in schedule and need to be replaced for making machine serviceable for proper operation shall be replaced by contractor at no extra cost and cost of item is deemed to be included in quoted rate.3. Cost of taking out drum for correcting the alignment and balancing is deemed to be included in quoted rates.4. Cost of T&P and transportation is deemend to be incuded in quoted rates. |
| 6 | M&L for servicing/repair of Washer Extractor upto 30 Kg capacity - 02 Nos of Make : Fabcare & Super shine including opening, dismantling of the machine, disconnecting all steam / water and electrical connection, cleaning / servicing of drum, balancing/alignment of drum & shaft cleaning, steam trap, servicing/ lubricating/greasing and adjusting the mechanical and electrical driving equipment, shaft assembly, bearing / bush, in and including change of lubricating oil,grease,all rubber gaskets/ packing of all equipments and oil seales as per OEM make and replacement of all kinds of minor defective / spares parts i.e. wire, lugs, nut, bolts,screw etc and all machine work i.e. welding, cutting, drilling, lathe work etc in and including repair/replacement of defective spares parts complete all as specified and directed by Engineer-in-Charge. |
| 7 | Note: 1. The parts replaced shall be measured seperately under relevent item.2. Any other defective part or part which is likely to fail and not present in schedule and need to be replaced for making machine serviceable for proper operation shall be replaced by contractor at no extra cost and cost of item is deemed to be included in quoted rate.3. Cost of taking out drum for correcting the alignment and balancing is deemed to be included in quoted rates.4. Cost of T&P and transportation is deemend to be incuded in quoted rates. |
| 8 | M&L for servicing/repair of Flat work ironner size 800 Dia, 300mm, 1 Roll of Make : Fabcare including opening, dismantling of the machine, disconnecting all steam / water and electrical connection, cleaning / servicing of chest/cylinder, steam trap, servicing/ lubricating/greasing and adjusting the mechanical and electrical driving equipment, shaft assembly, bearing / contact, servicing of blower in and including change of lubricating oil,grease,all rubber gaskets/ packing of all equipments and oil seales as per OEM make and replacement of all kinds of minor defective / spares parts i.e. wire, lugs, nut, bolts,screw etc and all machine work i.e. welding, cutting, drilling, lathe work etc in and including repair/replacement of defective spares parts and servicing of gear box, greasing/oiling complete all as specified and directed by Engineer-in-Charge. |
| 9 | Note: 1. The parts replaced shall be measured seperately under relevent item.2. Any other defective part or part which is likely to fail and not present in schedule and need to be replaced for making machine serviceable for proper operation shall be replaced by contractor at no extra cost and cost of item is deemed to be included in quoted rate.3. Cost of taking out chest/cylinder for correcting the alignment and balancing is deemed to be included in quoted rates.4. Cost of T&P and transportation is deemend to be incuded in quoted rates. |
| 10 | M&L for service/Over hauling of Drying Tumbler of capacity 100 Kg -03 Nos, comprising of opening, dismantling of the machine, disconnecting all steam / water and electrical connection, balancing / alignment of drum/shaft, remattling the shaft by taking it to the lathe work shop, cleaning / servicing of steam heating coil, steam trap, replacing all defective spares parts / items mentioned in Schedule and reassembling all dismantled part/items after carrying out necessary repair as required, including cleaning, servicing, oiling, greasing etc, making all water/steam connection and electrical connection, leak testing at desired pressure, with and including testing, complete all as specified and directed by Engineer-in-Charge. and required at site. |
| 11 | Note: 1. The parts replaced shall be measured seperately under relevent item.2. Any other defective part or part which is likely to fail and not present in schedule and need to be replaced for making machine serviceable for proper operation shall be replaced by contractor at no extra cost and cost of item is deemed to be included in quoted rate.3. Cost of taking out drum for correcting the alignment and balancing is deemed to be included in quoted rates.4. Cost of T&P and transportation is deemend to be incuded in quoted rates.5. If any defect occur till next service during CA period then contractor will carry out repair and replace the defective part of machine at no extra cost. |
| 12 | M&L for service/Over hauling of Drying Tumbler of capacity 30 Kg Nos, comprising of opening, dismantling of the machine, disconnecting all steam / water and electrical connection, balancing / alignment of drum/shaft, remattling the shaft by taking it to the lathe work shop, cleaning / servicing of steam heating coil, steam trap, replacing all defective spares parts / items mentioned in Schedule and reassembling all dismantled part/items after carrying out necessary repair as required, including cleaning, servicing, oiling, greasing etc, making all water/steam connection and electrical connection, leak testing at desired pressure, with and including testing, c complete all as specified and directed by Engineer-in-Charge. and required at site. |
| 13 | Note: 1. The parts replaced shall be measured seperately under relevent item.2. Any other defective part or part which is likely to fail and not present in schedule and need to be replaced for making machine serviceable for proper operation shall be replaced by contractor at no extra cost and cost of item is deemed to be included in quoted rate.3. Cost of taking out drum for correcting the alignment and balancing is deemed to be included in quoted rates.4. Cost of T&P and transportation is deemend to be incuded in quoted rates. |
| 14 | M&L for service / overhauling of Steam Boiler of 400 Kg/hr capacity-03 Nos (Make : Thermax RXD) including disconnecting of water / steam / electric connections, dismantling of boiler plant by unscrewing/cutting of screws, nuts & bolts etc, taking out complete coil assembly and other major parts from the boiler etc, replacing all defective spares parts, cleaning / servicing of coil assembly and descaling, repair/replacement of electrical control panel board, all machine works i.e. welding, cutting, drilling/ lathe etc as and when required and reassembling all dismantled part/items after carrying out necessary repair as required, other material, cleaning, servicing, oiling, greasing etc, making all steam / water connection and electrical connection, leak testing at desired pressure, with and including testing, commissioning of complete boiler plant to entire satisfaction of Engr-in-charge, complete all as specified and directed by Engineer-in-Charge. |
| 15 | Note: 1. The parts replaced shall be measured seperately under relevent item.2. Any other defective part or part which is likely to fail and not present in schedule and need to be replaced for making machine serviceable for proper operation shall be replaced by contractor at no extra cost and cost of item is deemed to be included in quoted rate.3. Cost of taking out drum for correcting the alignment and balancing is deemed to be included in quoted rates.4. Cost of T&P and transportation is deemend to be incuded in quoted rates. |
| 16 | M&L for servicing/overhauling of Flat Bed Press of size 1580mm(width) x 1100mm (depth) x 1220mm (high) comprising of opening, dismantling and disconnecting all electrical connection, replacing all defective spares parts / items mentioned in Schedule and reassembling all dismantled part/items after carrying out necessary repair as required, including cleaning, servicing, oiling, greasing etc, making electrical connection complete all as specified and directed by Engineer-in-Charge.Note: 1. The parts replaced shall be measured seperately under relevent item.2. Any other defective part or part which is likely to fail and not present in schedule and need to be replaced for making machine serviceable for proper operation shall be replaced by contractor at no extra cost and cost of item is deemed to be included in quoted rate.3. Cost of taking out drum for correcting the alignment and balancing is deemed to be included in quoted rates.4. Cost of T&P and transportation is deemend to be incuded in quoted rates. |
| 17 | Supply and Fixing, in replacement of Main bearing set of size (6322,2RS and 6323,2RS) (Big & Small bearing) suitable for Washer Extractor of 100 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and Fixing, in replacement of Main bearing seal set of silicon suitable for Washer Extractor of 100 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply and fixing, in replacement of main bearing circlip suitable for washer extractor of 100 kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply and fix in replacement of drive shaft suitable for 100/60 KG washer cum extractor as per existing shape and size complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L for taking out drive shaft of 100/60 Kg washer cum extractor and remetalling shaft for correcting any misalignment/defect using lathe & welding work as required and refixing the shaft in position complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F in replacement Solenoid valve of washer cum extractor 100/60 Kg capacity including necessary electrical and pneumatic connection complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F in replacement shocker of washer cum extractor 100 kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F in replacement FRL of washer cum extractor 100/600 kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F in replacement V-Belt of washer cum extractor 100/60 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F in replacement spring of washer cum extractor 100 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F in replacement hose pipe 2', standard length of washer cum extractor 100 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F in replacement hose pipe 4.5', standard length of washer cum extractor 100 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F in replacement water level switch of washer cum extractor 100 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F in replacement water flexible pipe with metal cladding of standard size and length of washer cum extractor 100/60 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F in replacement steam flexible pipe with metal cladding of standard size and length of washer cum extractor 100/60 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F in replacement B/F actuator valve 2' of washer cum extractor 100 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F in replacement B/F actuator valve 4' of washer cum extractor 100 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 34 | S&F in replacement steam angle valve 1' complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F in replacement cabin fan of washer cum extractor/drying tumbler of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F in replacement door glass of washer cum extractor 100 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F in replacement door gasket of washer cum extractor 100/60 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F in replacement pneumatic door lock of washer cum extractor 100 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F in replacement VFD 40 HP of washer cum extractor 100 Kg capacity including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 40 | M&L for repair of VFD 40 HP of washer cum extractor 100 Kg capacity including replacement of defective parts/ circuit plate including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 41 | M&L for repair of control circuit plate and display controller of washer cum extractor 100 Kg capacity including replacement of defective parts of circuit plate including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F in replacement of control circuit plate and display controller of washer cum extractor 100/60 Kg capacity including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F in replacement of timer switch of washer cum extractor 30 Kg capacity including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F in replacement of temperature controller of washer cum extractor 30 Kg capacity including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply and Fixing, in replacement of Main bearing set (Big & Small bearing) suitable for Washer Extractor of 60/30 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and Fixing, in replacement of Main bearing seal set of silicon suitable for Washer Extractor of 60/30 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply and fixing, in replacement of main bearing circlip suitable for washer extractor of 60/30 kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 48 | M&L for taking out drive shaft of 60/30 Kg washer cum extractor and remetalling shaft for correcting any misalignment/defect using lathe & welding work as required and refixing the shaft in position ccomplete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F in replacement Solenoid valve of washer cum extractor 60/30 Kg capacity including necessary electrical and pneumatic connection complete all as specified and directed by Engineer-in-Charge. |
| 50 | S&F in replacement shocker of washer cum extractor 60/30 kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F in replacement FRL of washer cum extractor 60/30 kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F in replacement V-Belt of washer cum extractor 60/30 Kg capacity of existing size and complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F in replacement spring of washer cum extractor 60/30 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F in replacement hose pipe 4.5', standard length of washer cum extractor 60/30 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F in replacement water level switch of washer cum extractor 60/30 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F in replacement steam flexible pipe with metal cladding of standard size and length of washer cum extractor 60/30 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F in replacement B/F actuator valve 2' of washer cum extractor 60/30 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F in replacement B/F actuator valve 4' of washer cum extractor 60/30 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F in replacement door gasket of washer cum extractor 60/30 Kg capacity of existing size and make complete all as specified and directed by Engineer-in-Charge. |
| 60 | M&L for repair of VFD 25 HP of washer cum extractor 60 Kg capacity including replacement of defective parts/ circuit plate including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 61 | M&L for repair of control circuit plate and display controller of washer cum extractor 60/30 Kg capacity including replacement of defective parts of circuit plate including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F in replacement FRL of flat bed ironner complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F in replacement of V-Belt of suitable size and make of flat bed ironner complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F in replacement of PVC pneumatic pipe including fitting complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F in replacement of VFD 7.5 Hp of flat bed ironner complete all as specified and directed by Engineer-in-Charge. |
| 66 | M&L for replacement cloth and covers suitable for Flat Work Ironer Machine complete all as specified and directed by Engineer-in-Charge. |
| 67 | M&L for replacement of conveyor belts with hook & pin suitable for Flat Work Ironer Machine, complete all as specified and directed by Engineer-in-Charge. |
| 68 | Supply and fixing, in replacement of guide tape suitable for Flat Work Ironer Machine complete all as specified and directed by Engineer-in-Charge. |
| 69 | Supply and fixing, in replacement of main bearing set roller suitable for Flat Work Ironer Machine complete all as specified and directed by Engineer-in-Charge. |
| 70 | M & L padding for Flat belt Iron work 100% polyester fiber with a higher temprature resistance sutable for long roller and working more than 2500 hrs complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in replacement of chain sproket set of flat work ironner complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F in replacement of chain of flat work ironner complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in replacement of temperature controller of flat work ironner complete all as specified and directed by Engineer-in-Charge. |
| 74 | S&F in replacement of pneumatic cylinder for chest movement of existing size and make of flat work ironner complete all as specified and directed by Engineer-in-Charge. |
| 75 | S&F in replacement of solenoid valve of existing size and make of flat work ironner complete all as specified and directed by Engineer-in-Charge. |
| 76 | S&F in replacement of steam trap of existing size and make of flat work ironner complete all as specified and directed by Engineer-in-Charge. |
| 77 | S&F in replacement of SS flexible steam inlet pipe of existing size suitable for Flat bed Press complete all as specified and directed by Engineer-in-Charge. |
| 78 | S&F in replacement of white nipples suitable for Flat bed Press complete all as specified and directed by Engineer-in-Charge. |
| 79 | S&F in repair spring for flat bed press existing make and type, complete all as specified and directed by Engineer-in-Charge. |
| 80 | Supply and fix Drum shaft (Big) suitable for 60/30 KG Dry Tumbler as per existing shape and size including taking down old U/S one complete all as specified and directed by Engineer-in-Charge. |
| 81 | Supply and fix Belt driven shaft (Small) suitable for 60/30 KG Dry Tumbler as per existing shape and size including taking down old U/S one complete all as specified and directed by Engineer-in-Charge. |
| 82 | S&F in replacement of Steam Heating Coil having Copper Tube with Aluminium Fins suitable for Drying Tumblers of 60/30 Kg capacity complete complete all as specified and directed by Engineer-in-Charge. |
| 83 | S&F in replacement of V-belt of existing size suitable for Drying Tumblers of 60/30 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F in replacement of steam trap suitable for Drying Tumblers of 60/30 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 85 | S&F in replacement of main drive bearing (2210) alongwith sleeves suitable for Drying Tumblers of 60 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 86 | S&F in replacement of idler drive bearing (2213) alongwith indler sleeves suitable for Drying Tumblers of 60 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F in replacement of Door Latches for lint screen suitable for Drying Tumblers of 60/30 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 88 | S&F in replacement of door limit switch suitable for Drying Tumblers of 60/30 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 89 | S&F in replacement of Timer 0-60 sec time delay suitable for Drying Tumblers of 60 Kg complete all as specified and directed by Engineer-in-Charge. |
| 90 | S&F in replacement of timer rev-fwd action suitable for Drying Tumblers of 60/30 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F in replacement of Digital temperature controller suitable for Drying Tumblers of 60/30 Kg capacity / flat bed press complete all as specified and directed by Engineer-in-Charge. |
| 92 | S&F in replacement of main drive bearing alongwith sleeves suitable for Hydro extractor 60/30Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 93 | S&F in replacement of, transformer of 15 Amp capacity suitable for Hydro Extractor of 30 Kg capacity complete all as specified and directed by Engineer-in-Charge. Make: As per existing sample. |
| 94 | S&F in replacement of Buffer suitable for 30 Kg Hydro extractor complete all as specified and directed by Engineer-in-Charge. Make: As per existing sample. |
| 95 | S&F in replacement of Oil seal suitable for 30 Kg Hydro extractor complete all as specified and directed by Engineer-in-Charge.Make: Everest |
| 96 | S&F in replacement of Limit switch suitable for 25 Kg Hydro extractor Complete all as specified and directed by Engineer-in-Charge. Make: Seimens/Schenider. |
| 97 | S&F in replacement of Spring suitable for 30 Kg Hydro extractor (Make : Stefab) complete all as specified and directed by Engineer-in-Charge.Make: As per existing sample. |
| 98 | S&F in replacement rectifier and element for hydro extractor complete all as specified and directed by Engineer-in-Charge. |
| 99 | S&F in replacement of FRL of Flat bed press complete all as specified and directed by Engineer-in-Charge. |
| 100 | M&L for replacement of cushion cloth/canvas set of flat bed press on top and bottom portion of press complete all as specified and directed by Engineer-in-Charge. |
| 101 | S&F in replacement of SS Flexible pipe of existing size and length of Flat bed press complete all as specified and directed by Engineer-in-Charge. |
| 102 | S&F in replacement of pneumatic cylinder of existing size of Flat bed press complete all as specified and directed by Engineer-in-Charge. |
| 103 | S&F in replacement of spring of existing size of Flat bed press complete all as specified and directed by Engineer-in-Charge. |
| 104 | S&F in replacement of temperature controller of Flat bed press complete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F in replacement of bearing set of existing size of Flat bed press complete all as specified and directed by Engineer-in-Charge. |
| 106 | M&L for servicing of reciprocating air compressor including replacement of complete compressor oil, air filters, replacement of defective parts pressure switch, solenoid valve, FRL, Oil Air lube, NRV Seat, Spring NRV as applicable, filter assembly or any other defective part required to make compressor serviceable, including oiling/greasing, machine work, lathe work, welding work omplete all as specified and directed by Engineer-in-Charge.Note: 1. Any other defective part or part which is likely to fail and not present in schedule and need to be replaced for making machine serviceable for proper operation shall be replaced by contractor at no extra cost and cost of item is deemed to be included in quoted rate.2. Cost of T&P and transportation is deemend to be incuded in quoted rates.3. If any defect occur till next service during CA period then contractor will carry out repair and replace the defective part of machine at no extra cost. |
| 107 | S&F limit switch suitable for Steam Boiler of 400 Kg capacity complete all as specified and directed by Engineer-in-Charge. |
| 108 | S&F Coil RXD 400 for 400 Kg/ boiler |
| 109 | S&F Sequence controller suitable for Steam Boiler of 400 Kg capacity, complete all as specified and directed by Engineer-in-Charge. |
| 110 | S&F Burner Rod suitable for Steam Boiler of 400 Kg capacity, complete all as specified and directed by Engineer-in-Charge. |
| 111 | S&F metallic hose pipe 3/8\\" X 40 \\" size suitable for Steam Boiler of 400 Kg capacity, complete all as specified and directed by Engineer-in-Charge. |
| 112 | S&F SS diffuser plate 132 mm suitable for Steam Boiler of 400 Kg capacity, complete all as specified and directed by Engineer-in-Charge, complete all as specified and directed by Engineer-in-Charge. |
| 113 | S&F Insulyte 7 Low Density Insulating Castable suitable for Steam Boiler of 400 Kg capacity, complete all as specified and directed by Engineer-in-Charge. |
| 114 | S&F electronic timer suitable for Steam Boiler of 400 Kg capacity, complete all as specified and directed by Engineer-in-Charge. |
| 115 | S&F thermocouple (TC) K type SS310 for Primary chamber suitable for Steam Boiler of 400 Kg capacity, complete all as specified and directed by Engineer-in-Charge. |
| 116 | S&F safety relief value suitable for Steam Boiler of 400 Kg capacity, complete all as specified and directed by Engineer-in-Charge. |
| 117 | S&F PRV (Pressur reducing valve ) 50 mm bore including fixing arrangement , welding , brazing and taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 118 | Supply and Fix Boiler Optimizer (Operation Performance Management for steem Plant) suitable for 400 Kg as per existing shape and size including taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 119 | Supply and Fix Boiler Economiser (Energy improving device) suitable for 400 Kg as per existing shape and size including taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 120 | S&F, in replacement, of RTD PT-100 temperature sensor output, complete all as specified and directed by Engineer-in-Charge. |
| 121 | S&F, in replacement, of RTD temperature controller 0-1200ºC, K type input, complete all as specified and directed by Engineer-in-Charge. |
| 122 | S&F oil filter suitable for Steam Boiler of 400 Kg capacity, complete all as specified and directed by Engineer-in-Charge.. |
| 123 | S&F ignition electrode suitable for Steam Boiler of 400 Kg capacity, complete all as specified and directed by Engineer-in-Charge, complete all as specified and directed by Engineer-in-Charge. |
| 124 | S&F photo ignition electrode suitable for Steam Boiler of 400 Kg capacity, complete all as specified and directed by Engineer-in-Charge. |
| 125 | M&L for repair of Fuel pump AJ6AC suitable for Steam Boiler of 400 Kg capacity including dismantling of pump replacement of defective parts, oiling greasing and refitting in position complete all as specified and directed by Engineer-in-Charge. |
| 126 | M&L for repair of triplex pump suitable for Steam Boiler of 400 Kg capacity including dismantling of pump replacement of defective parts, oiling greasing and refitting in position complete all as specified and directed by Engineer-in-Charge. |
| 127 | M&L for Maxtreat 3220 solution for water softning plant, complete all as specified and directed by Engineer-in-Charge. |
| 128 | M&L for Maxclean 05 descaling chemical for boiler plant, complete all as specified and directed by Engineer-in-Charge. |
| 129 | M&L for Maxtreat 3004 solution for water softning plant, complete all as specified and directed by Engineer-in-Charge. |
| 130 | M&L for dismantling of electric driven horizontal induction motor of upto 30 HP capacity of any type and make, including disconnecting of electric connections, dismantling of motor, taking out the burnt windings, cleaning and washing of slots and rewinding the same with copper winding wire of existing gauge and quantity (as per original manufacturer design) including replacement of all damaged parts i. e. bearings, bush, thrust plate, thrust bearing, connector plate, insulating materials such as insulating sheets insulating paper (Class \\"F\\"), sealing compounds etc and reassembling the motor after varnishing, heating/drying, greasing of moving parts etc and reinstallation of the motor in original location, checking the alignment, making proper electric connection, testing for smooth operation, complete all as specified and directed by Engineer-in-Charge.Note: Cost of T&P and transportation is included in quoted rates. |
| 131 | Description all as per Serial item No 122.00 here-in-before, but for 15 HP capacity, 3 ph, 415 volt, 50 Hz AC. |
| 132 | Description all as per Serial item No 122.00 here-in-before, but for 7.5to 10.0 HP capacity, 3 ph, 415 volt, 50 Hz AC. |
| 133 | Description all as per Serial item No 122.00 here-in-before, but for 3 HP capacity, 3 ph, 415 volt, 50 Hz AC. |
| 134 | Description all as per Serial item No 122.00 here-in-before, but for 2 HP capacity, 3 ph, 415 volt, 50 Hz AC. |
| 135 | Supply and lay MS pipe pipe in replacement 20 mm bore heavy grade with all fittings laid in floors or ffixed to walls and ceiling etc complete all as specified and directed by Engineer-in Charge. |
| 136 | Description all as per Serial item No 127.00 here-in-before, but for pipe size of 25 mm dia. |
| 137 | Description all as per Serial item No 127.00 here-in-before, but for pipe size of 32 mm dia. |
| 138 | Description all as per Serial item No 127.00 here-in-before, but for pipe size of 40 mm dia. |
| 139 | Description all as per Serial item No 127.00 here-in-before, but for pipe size of 50 mm dia. |
| 140 | Description all as per Serial item No 127.00 here-in-before, but for pipe size of 65 mm dia. |
| 141 | Description all as per Serial item No 127.00 here-in-before, but for pipe size of 80 mm dia. |
| 142 | Description all as per Serial item No 127.00 here-in-before, but for pipe size of 100 mm dia. |
| 143 | S&F in replacement Bronze Globe steam stop valve of size 50 mm dia as per ISI 778 ,class-2 gun metal body (IS-318LTB2), screwed in bonnet, out side screw and yoke type rising stem ,test pressure 500Psig. Hydraullic ,working pressure 250Psig at 450degree farenhite HSN CODE 84818030, complete all as specified and directed by Engineer-in-Charge. |
| 144 | Description all as per Serial item No 135.00 here-in-before, but 80 mm dia size. |
| 145 | Description all as per Serial item No 135.00 here-in-before, but 80 mm dia size. but 25 mm dia size. |
| 146 | S&F, in replacement, existing size caster wheel, swivel type, heavy duty, with supporting base plate bracket complete with nut and bolts etc of existing shape and size suitable for washroom trolley, complete all as specified and directed by Engineer-in-Charge. |
| 147 | S&F in replacement, existing size caster wheel, fixed type, heavy duty, with supporting base plate bracket complete with nut and bolts etc of existing shape and size suitable for washroom trolley, complete all as specified and directed by Engineer-in-Charge. |
| 148 | M&L for crystal type salt of sodium chloride 25 Kg Bag for water softening plant @ 3 Kg/day omplete all as specified and directed by Engineer-in-Charge. |
| 149 | Supply & fixing in replacement, of MCB 40 to 63 Amp, TPN, 18 KA, C Curve, complete all as specified and directed by Engineer-in-Charge. |
| 150 | Supply & fixing in replacement of Brake Timer 0-60 sec time delay suitable for 30 Kg Hydro extractor complete all as specified and directed by Engineer-in-Charge. |
| 151 | S&F in replacement power contactor suitable for washer cum extractor 100 Kg including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 152 | S&F in replacement MPD suitable for washer cum extractor 100 Kg including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 153 | S&F in replacement rev-fwd timer suitable for washer cum extractor 100 Kg including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 154 | S&F in replacement power contactor suitable for drying tumbler 100/60 Kg including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 155 | S&F in replacement SPP suitable for drying tumbler 100/60 Kg including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 156 | S&F in replacement steam/water ball valve of size 15 mm complete all as specified and directed by Engineer-in-Charge. |
| 157 | S&F in replacement steam/water ball valve of size 20 mm complete all as specified and directed by Engineer-in-Charge. |
| 158 | S&F in replacement steam/water ball valve of size 25 mm complete all as specified and directed by Engineer-in-Charge. |
| 159 | S&F in replacement steam/water ball valve of size 50 mm complete all as specified and directed by Engineer-in-Charge. |
| 160 | S&F in replacement of emergency stop switch complete all as specified and directed by Engineer-in-Charge. |
| 161 | S&F in replacement of push button complete all as specified and directed by Engineer-in-Charge. |
| 162 | S&F in replacement of LED indicator complete all as specified and directed by Engineer-in-Charge. |
| 163 | S&F in replacement 0-20 s timer timer suitable for hrdro extractor 30 Kg including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 164 | S&F in replacement power contactor suitable for hrdro extractor 25 Kg including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 165 | S&F in replacement SPP suitable for hrdro extractor 30 Kg including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 166 | S&F in replacement power contactor suitable for flat bed ironner including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 167 | S&F in replacement SPP suitable for flat bed ironner including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 168 | S&F in replacement overload relay suitable for flat bed ironner including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 169 | S&F in replacement overload relay suitable for boiler including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 170 | S&F in replacement power contactor suitable for boiler including electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 171 | M&L Shifting of the laundry plant air compressor from the plant to an outside location includes safe shutdown and disconnection of electrical supply, control wiring, and compressed air lines. The compressor unit is carefully dismantled, lifted, and transported to the designated outdoor area using suitable equipment such as a crane. The unit is then positioned on a prepared foundation, aligned properly, and reinstalled. All electrical, control, and air line connections are reconnected, ensuring proper sealing and support. Final testing and commissioning are carried out to verify safe, efficient, and reliable operation of the compressor system complete all as specified and directed by Engineer-in-Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
