Tender For Misc B/R Repairs To Otm Accn At Vsn Chiloda Under Ge (Af) Chiloda
Tender Value
45 Lakhs
Estimated cost
Bid Submission
13 May 2026
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chiloda → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Misc B/R Repairs To Otm Accn At Vsn Chiloda Under Ge (Af) Chiloda-- 1 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. 2 Taking Down Cement Plaster Of Any Description Including Racking Out Joints, Hacking For Key And Disposing Of Debris Out Side Md Land Complete All As Specified And Directed. 3 Demolition Of Brickwork Built In Cement Morter Including Work All Quoins, Arches, Pillars, Etc, Complete All As Specified And Directed. 4 Demolition Cement Concrete (Unreinforced) Of Any Description And In Any Position Not Otherwise Specifically Provided For Complete All As Specified And Directed.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris out side MD land complete all as specified and directed. |
| 3 | Demolition of Brickwork built in cement morter including work all quoins, arches, pillars, etc, complete all as specified and directed. |
| 4 | Demolition Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | Hacking out old broken glass of any thickness, size, quality or description from metal /wooden frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed. |
| 6 | S & F Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed. |
| 7 | M&L for scrafying or picking consolidated hardcore of thickness n exc 150mm and removing outside MD land complete all as specified and directed. |
| 8 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n exc 1.5 sqm each complete all as specified and directed. |
| 9 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 sqm but n exc 4.00 sqm each complete all as specified and directed. |
| 10 | Taking down shutters of any description exc 1sq. m but n exc 2.00 sqm each complete all as specified and directed. |
| 11 | Taking down aluminium chowkats with glass shutters of any size/description including glass panes, rubber packing, snap beading, particle/partition board etc, complete all as specified & directed. |
| 12 | Dismantling of stone slabs & tiles of any thickness & in any position laid, bedded and pointed in any mortar otherwise specified. |
| 13 | Material and Labour for Hardcore of broken stones of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 14 | M&L for providing cement concrete 1:3:6, type C2 (40mm graded aggregate] in post, foundations, filling and mass concrete complete all as specified |
| 15 | M& L for brickwork for wall with flyash bricks having CM 1:6 staight or curved on plane 6.00 m raidius built in complete all as specified and directed. |
| 16 | M&L for old size brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM 1:4 complete all as specified and directed. |
| 17 | Repair of loose doors by replacing unserviceable existing hinges taking down and refixing in same opening, fittings & adjustment for smooth functioning as required and as directed by Engr-in-Charge. (built in cupboard) |
| 18 | S & Fin repairs aluminium anodised barrel tower bolts of extruded section of length 150 mm including taking down old unserviceable barrel tower bolts complete all as specified and directed. |
| 19 | S & Fin repairs aluminium anodised barrel tower bolts of extruded section of length 100 mm including taking down old unserviceable barrel tower bolts complete all as specified and directed. |
| 20 | S & F in repairs 300 mm Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections including taking down old sliding door bolt all as specified and as directed. |
| 21 | S & F in repair 300 mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed. |
| 22 | S & F in repairs aluminium extruded alloy handles fabricated type anodised of size 150 mm including taking down old handles all as specified and as directed. |
| 23 | S & F hasp and staple safety type of size 100 mm of aluminium anodized including taking down old hasp and staple all as specified and as directed. |
| 24 | S & F in repairs brass Chromium plated 20 mm dia tubular towel rail 'D' type 600 mm long including taking down old towel rail complete all as specified and as directed. |
| 25 | S & F 100 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring including taking down old door stopper of aluminium all as specified and as directed. |
| 26 | S & F 150 mm floor door stopper but of brass body and tongue with hard drawn steel spring including taking down old door stopper of aluminium all as specified and as directed. |
| 27 | S & F stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts in repairs all as specified and as directed. |
| 28 | S & F Aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm fixed with MS screw & bolts all as specified and as directed. |
| 29 | S & F in repairs Brass barrel tower bolts 150mm long, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 30 | S & F in repairs Brass barrel tower bolts 200mm long, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 31 | S & F in repairs 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 32 | S & F in repairs 200mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 33 | S & F in repairs 150mm long Brass handles, cast type, polished bright complete all as specified and directed. |
| 34 | M&L for 75mm thick Cement concrete type D-2 1:4:8 (40 mm graded graded aggregate) as in sub base of floor finishes and pavings and similar works complete all as specified and directed. |
| 35 | M&L for 75 mm thick PCC ( 1:3:6) type C-2,(20mm graded aggregate) as in plinth protection including joint filling etc complete all as specified and directed. |
| 36 | M & L for raking out joints in floor / wall tiling and pointing with white cement mixed with colour pigment to match complete all as specified and directed. |
| 37 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lepping in square not exc 0.50 Sqm each in each pane complete all as specified and directed. |
| 38 | S&F in repairs 5.5 mm thick sheet glass ordinary quality area not exc 0.50 Sqm in each pane for aluminum frame work incl glazing cleat complete all as specified and as directed. |
| 39 | S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work all as specified and as directed by Engr-in-Charge |
| 40 | S&F in repairs 5.5 mm thick tinted glass in black colour , exc 0.5 Sqm of selected quality glass incl glazing cleat complete all as specified and directed. |
| 41 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc and including screed bed 20mm thick in CM (1:6) all as specified and directed. |
| 42 | All as per item No 41 above, but on vertical surfaces/skirting and including backing coat of 10mm thick in CM (1:4) all as specified and directed. |
| 43 | M & L for glazed ceramic colour tiles in vertical surfaces 300x 200x 7mm/ 300X 450X 7mm /600*300*7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat of 10mm thick in CM (1:4) all as specified and directed. |
| 44 | M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 20mm thick in CM (1:6) all as specified and directed. |
| 45 | M&L for Ceremic Wooden finish flooring planks (Floor Tiles) of thickness 10mm-12mm and area not exc 2 sqm (square/ rectangular) of each tile in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 20mm thick in CM (1:6) all as specified and directed. |
| 46 | All as per item No 45 above, but on vertical surfaces/skirting and including backing coat of 10mm thick in CM (1:4) all as specified and directed. |
| 47 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 20mm in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 48 | M&L 15-16mm thick Granite tiles (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in cooking platform etc over 15mm thick screed bed and like in cement mortar (1:6) including grinding and polishing complete all as specified and directed. |
| 49 | M&L 15-16mm thick Granite tiles (of any type) machine cut, in skirting/dado laid over backing coat 10mm thick in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 50 | M&L for PVC glossy rubber non slip handrail protection any colour of thickness 5-6mm and width not exc 75 mm complete as in stair handrails including fixing at site complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | M&L for PVC glossy rubber non slip handrail protection any colour of thickness 5-6mm and width not exc 75 mm complete as in stair handrails including fixing at site complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Apr 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMay 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender