Tender For Internal Electrical & Elv, Hvac, Bms, Fire Fighting System & External Electrification & Pumps Accessories For Csf-06 (Bio Material Facilities) In Plot No. F-14, Sector-28, Yeida., Gautam Buddha Nagar-Uttar Pradesh

TDR : 55195635

Tender Notice
BOQ

5 Days Left

Gautam Buddha Nagar , Uttar Pradesh

Tender Brief : Tender For Internal Electrical & Elv, Hvac, Bms, Fire Fighting System & External Electrification & Pumps Accessories For Csf-06 (Bio Material Facilities) In Plot No. F-14, Sector-28, Yeida.

Document Fees
₹ 6010 /-

EMD
₹ 856000.0 /-

Tender Value
₹ 4.27 Crore /-

Submission Date
04-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	INTERNAL ELECTRIFICATION WORKS :- SUB-HEAD - Internal Wiring
2	Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit concealed in the wall and partly concealed laid in slab complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. PS-138(C)
3	Wiring point for two way with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit concealed in the wall and partly concealed laid in slab complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. PS-139(C)
4	Wiring point for fan/ fresh air fan with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit concealed in the wall and partly concealed laid in slab complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. PS-140(C)
5	Wiring point for Plug point with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit concealed in the wall and partly concealed laid in slab complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, PS-141(C)
6	Wiring point for Call Bell Point with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit concealed in the wall and partly concealed laid in slab complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, PS-142(C)
7	Supply and fixing of power plug with 20A/250 volt flush type modular switch and 5 pin 20A/250V flush type universal socket in concealed M.S. box including supply of all material laour T&P etc. required for proper completion of work
8	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
9	Addition when modular type switches etc. are used in place of piano type switches etc. in various wiring points. Add for light / fan points with modular type switch in place of piano type switch.
10	Addition when modular type switches etc. are used in place of piano type switches etc. in various wiring points. :- Add for 2 way light point with modular switches in place of piano type switches.
11	Addition when modular type switches etc. are used in place of piano type switches etc. in various wiring points. :- Add for plug point with modular switch & socket in place of piano type switch & socket.
12	Addition when modular type switches etc. are used in place of piano type switches etc. in various wiring points. :- Add for HPMV/Exhaust fan point with modular type switch in place of piano type switch.
13	Addition when modular type switches etc. are used in place of piano type switches etc. in various wiring points. :- Add for Call bell point with modular type bell push in place of piano type bell push.
14	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.:-Telephone socket outlet
15	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.:-TV antenna socket outlet
16	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.:-Bell push
17	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.:-CAT -6 / DATA outlet
18	Supply and fixing of electronic fan dimmer(Modular) 300/400 watt, ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.
19	Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
20	Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
21	Supply and fixing of G.P. Modular switch box for 1 / 2 Module of approved make made up of 1.0 mm thick ISI Marked G.P.sheet including adjestable Nakka and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge.
22	Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module
23	Supply and wiring of submain with FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in Heavy gauge PVC conduit partly laid in slab alongwith with reinforcement before concreting and partly concealed in wall with FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawin in conduit, complete in all respects
24	Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with 1 number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire. complete in all respect.
25	2 X 4 sq. mm + 1 X 2.5 sq. mm earth wire in 20 mm dia heavy duty (2mm thick) PVC conduit
26	2 X 6 sq. mm + 1 X 4 sq. mm earth wire in 25 mm dia heavy duty (2mm thick) PVC conduit
27	2 X10 sq. mm + 1 X 6 sq. mm earth wire in 25 mm dia heavy duty (2mm thick) PVC conduit
28	2 X 16 sq. mm + 1 X 4 sq. mm earth wire in 32 mm dia heavy duty (2mm thick) PVC conduit
29	2 X 25 sq. mm + 1 X 16 sq. mm earth wire in 32 mm dia heavy duty (2mm thick) PVC conduit
30	4 X 6 sq. mm + 2 X 4 sq. mm earth wire in 32 mm dia heavy duty (2mm thick) PVC conduit
31	4 X 10 sq. mm + 2 X 6 sq. mm earth wire in 32 mm dia heavy duty (2mm thick) PVC conduit
32	4 X 16 sq. mm + 2 X 10 sq. mm earth wire in 40 mm dia heavy duty (2mm thick) PVC conduit
33	4 X 25 sq. mm + 2 X 16 sq. mm earth wire in 50 mm dia heavy duty (2mm thick) PVC conduit
34	Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge.
35	Supply and fixing and concealing of 25 mm dia 2 mm thick PVC conduit Pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge.
36	SUB-HEAD - Switchgears & DBs
37	S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. CAT A
38	S & F surface/Flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect, as Direct by Engineer in Charge. - CAT A
39	S & F surface/Flush mounting 6ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. - CAT A
40	S & F surface/Flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. - CAT A
41	S & F surface/Flush mounting 12ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. - CAT A
42	S&F of 6 Amp to 32 Amp. SP MCB (10 KA) C Curve - CAT A
43	S&F of 6 Amp to 32 Amp. DP MCB (10 KA) C Curve - CAT A
44	S&F of 40 Amp. DP MCB (10 KA) C Curve - CAT A
45	S&F of 63 Amp. DP MCB (10 KA)- CAT A
46	S&F of 6 Amp. to 32 Amp. 4 pole MCB (10 KA) C Curve - CAT A
47	S&F of 40 Amp. 4 pole MCB (10 KA) - CAT A
48	S&F of 63 Amp. 4 pole MCB(10 KA) C Curve - CAT A
49	S&F of single pole MCB blanking plate
50	S&F of 125 Amp 4 pole MCCB (25 KA) Thermal Magnetic Release CAT-A
51	Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.:- 40 Amps (DP)
52	Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.:- 63 Amps (DP)
53	Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.:- 40 Amps (FP)
54	Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.:- 63 Amps (FP)
55	Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel at least 2 mm thick, vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
56	SUBHEAD- Light Fixtures and Fittings
57	mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.-CAT AAA
58	Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.-CAT AAA
59	Supply and fixing of recess/surface mounting round 24 Watt to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set completed in all respects.-CAT AAA
60	Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.-CAT AAA
61	Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.-CAT AAA
62	Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect.-CAT AAA
63	Supply, Installation, Testing and Commissioning of 10W LED batten 2' long with high end diffuser for uniform distribution of light complete with inbuilt electronic driver & installation accessories etc as required for making system functional. (Mirror light)
64	Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc complete in all respect.-CAT AAA
65	Supply of regular/standard model A.C. ceiling fan of 1200 mm sweep including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated copper conductor etc as required.
66	Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect.
67	Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect.
68	Making hole in the wall for exhaust fan and finishing properly complete in all respect.
69	Supply of 300 mm, 230 v A.C. exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required.
70	Supply and fixing of recess/surface mounting round 10 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set completed in all respects.
71	SUBHEAD- Hot Dipped Galvanized Iron Cable Tray
72	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.:- 150 mm width X 50 mm depth X 1.6 mm thickness
73	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.:- 300 mm width X 50 mm depth X 1.6 mm thickness
74	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"bends\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. :- 150 mm width X 50 mm depth X 1.6 mm thickness
75	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"bends\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. :- 300 mm width X 50 mm depth X 1.6 mm thickness
76	Supplying and installing following size of perforated hot dipped galvanised iron cable tray \\"tee\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.:-150 mm width X 50 mm depth X 1.6 mm thickness
77	Supplying and installing following size of perforated hot dipped galvanised iron cable tray \\"tee\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.:- 300 mm width X 50 mm depth X 1.6 mm thickness
78	Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable tray \\"Reducer\\" (galvanization not less than 50 microns) with perforation not more than17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. :- 150 mm width X 50 mm depth X 1.6 mm thickness
79	Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable tray \\"Reducer\\" (galvanization not less than 50 microns) with perforation not more than17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. :- 300 mm width X 50 mm depth X 1.6 mm thickness
80	Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable tray \\"Reducer\\" (galvanization not less than 50 microns) with perforation not more than17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. :- 150 mm width X 50 mm depth X 1.6 mm thickness
81	Supplying and installing following size of perforated Hot Dipped Galvanized Iron cable tray \\"Reducer\\" (galvanization not less than 50 microns) with perforation not more than17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. :- 300 mm width X 50 mm depth X 1.6 mm thickness
82	Supply & Fixing of factory fabricated pre-galvanized G.I. sheet steel raceway in 1.6mm thickness for bottom & sides and 2/3mm thick top Cover as called for including necessary civil work such as chase cutting in screed, fixing/ jamming the raceway, aligning & levelling and finishing with sand cement plaster etc. complete as required.150mm x 40mm (2mm top Cover)
83	Supply & Fixing of openable top Cover floor Junction Boxes made from 2mm thick pre-galvanised GI sheets for bottom & sides & 3mm thick GI top Cover complete with rubber gasketing beneath the top Cover. The Junction Boxes shall be suitable to accommodate GI floor raceways as specified above, necessary civil work as described in earlier item to be included here too. - 150 x 150 x 40 mm
84	SUBHEAD -ADDRESSABLE TYPE FIRE ALARM & PUBLIC ADDRESS SYSTEM
85	Supply, Installation, Testing & Commissioning of Microprocessor based Networkable Analogue Addressable Type Fire Alarm Control Panel Expandable upto 9 Loop with 80 (4 x 20) character LCD display. Each SLC Loop is capable of supporting 159 Analog Sensors and 159 Addressable Modules which can be wired in Style 6 or 7 (Class A) or Style 4 (Class B). Four Style Z/Y (Class A/B) Notification Appliance Circuits rated at 1.7 Amps each. Group bypass with built-in false alarm prevention technology. Supports 3 configuration files with “hot swap” support. Built-in Walk Test operation. The system can be configured without taking the panel offline. The System shall have 12000 Events log. The System shall have an option for 3D Event Management Interface to display facilities organized by building, floor, and device.
86	The Panel shall have inbuilt port for Printer and Annunciator. The System shall have sufficient numbers of programmable relay controls for controlling AHUs, pressurization fans, ventilation fans at fire pump room, monitoring of fire sprinkler and fire hydrant pump, Minimum of 12 Amp Power Supply, automatic battery charger 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions. The panel complies with latest Fire codes and standards, UL Listed & FM Approved. (The System cost shall be included of all necessary cards, modules, enclosure, CPU and associated acccessories to complete the system design. All components including enclosures shall be UL Listed.) One Loop Panel.
87	Supplying, Installation, Testing & Commissiong of Dual Action Manual Pull Station. The Pull Station shall be constructed of High Quality Die-Cast Metal, Gold plated SPST contacts and terminal strip connections. Pull stations shall be finished in High-gloss red enamel, raised-letter operating instructions in contrasting color; shall show visible indication of operation; and utilize a key type reset, complete with metal Backbox for mouting on Surface. The Pull Station shall be UL Listed & FM Approved.
88	Supply, Installation, Testing & Commissioning of The Horn/Strobe with Advanced LED Technology which offer an audible/visual solution that delivers exceptional energy efficiency in a compact design. The LED Horn/Strobe provide a lower current draw which allows for more devices on a NAC circuit while reducing the number of external power supplies required. The LED Horn/Strobe offer a wide range of audible/visual settings in a single compact device. The audible settings include Temporal, Continuous, March Time and 20 BPM tones that can each be set for Low or High volume settings. The candela settings can be field-configured for 15, 15/75, 30, 75, 110, 185 cd. The candela setting is displayed through the front window for easy identification.The LED Horn/Strobe shall be UL Listed.
89	Supply of 2c x 1.5 sq.mm Fire Survival Circuit Integrity Armoured Cable 600/1000 Volt rated with class-2 Copper conductor having cross linkable Low Smoke Zero Halogen insulation as per BS EN50363 and Low Smoke Zero Halogen (LSZH) inner & outer sheath. The cable should meet fire performance circuit integrity test as per BS EN50200 PH-120 & BS6387 CWZ (950 Deg. C for 3 hours). The cable should be LPCB certified to BS EN50200 (PH-120 & BS6387 CWZ. Outer sheath should be in Red colour having ANTI-RODENT LSZH properties.
90	Supply of Analogue Addressable Multisensor equipped with a Bidirectional short circuit isolator having three sensors One Optical and Dual Heat Sensor (Static and ROR both). Two Tri-Color LEDs FOR 360° Visible for Normal, Fault and alarm condition, The addressing shall be by means of both Soft addressing or Hard Addressing like dip switches or decade switches or suitable address cards or through the hand-held device programmer. The Remote output can be controlled by the Fire Alarm Control Panel. The Advanced software algorithms for smoke detection. Anti-Tamper feature provides additional security to all devices. Protect against nuisance alarms caused by dust, insects or other debris. Magnet test option helps with commissioning and maintenance. Alongwith a breakable flat tab in the centre of the base can be cut and inserted in the base outer edge, then a label can can be used to identify the device. The Detectors shall be UL268, 7th Edition/ULC S529 Rev 4 standards & FM Approved.
91	Supply of Analogue Addressable Tri-Mode Heat Detectors equipped with a Bidirectional short circuit isolator that continuously monitors the environmental temperature to report high heat conditions and communicates with the panel using a fully digital protocol. Three operational modes of heat detection 57°C (135°F) & 79°C (175°F) – Fixed Heat Detection & 57°C (135°F) – Rate of Rise and to be possible to configure the detector to work in any of the mode. Two Tri-Color LEDs FOR 360° Visible for Normal, Fault and alarm condition, The addressing shall be by means of both Soft addressing or Hard Addressing like dip switches or decade switches or suitable address cards or through the hand-held device programmer. The Remote output can be controlled by the Fire Alarm Control Panel. The advanced software algorithms for smoke detection. Anti-Tamper feature provides additional security to all devices. Protect against nuisance alarms caused by dust, insects or other debris. Magnet test option helps with commissioning and maintenance. Alongwith a breakable flat tab in the centre of the base can be cut and inserted in the base outer edge, then a label can can be used to identify the device. The Detectors shall be UL268, 7th Edition/ULC S529 Rev 4 standards & FM Approved.
92	SUBHEAD - CCTV System
93	Supply, Installation, Testing and Commissioning of STQC Certified 5 MP Vandal Resistant IR Dome Camera with Heater, 5 MP (2592 x 1944) Resolution, Motorized Vari-focal Lens (f = 3.6 - 10 mm), Aperture F 1.8 - 2.8, Min. Illumination Color 0.2 lux @ F 1.8, B / W : 0 lux (IR LED ON), Dynamic Range 120 dB (True WDR), IR Cut Filter with auto switch, IR Distance (LEDs) : 30 Meter, Two way audio, Alarm in / out, Exposure, White Balance, Self-Adjusting Video Mode (Sharpness, Contrast, Colors, Brightness Control), Video Motion Detection, Active Tampering Alarm, Trip Zone, Video Compression: H.265, H.264 (MP), M-JPEG, IP Camera Protocol: ONVIF Profile S, Quadruple: Video Streaming, Trigger Event: Motion Detection, Alarm in, Audio detection, Tampering, Trip Zone, Event Notification Remote: S / W, Email (with Image), Micro SD / SDHC / SDXC, Smart Failover (Up to 256GB), Analytics events based on AI engine (Person, Vehicle), Object Detection Intrusion, Loitering, Line Crossing, Face Detection, IK10 Vandal Proof Casing, IP67 Outdoor Ready, 3-axis mechanical design for installation, Power Source: 12VDC, PoE, Operating Temperature: - 40°C to 60°C, Operating Humidity: 0% ~ 90%, MTBF time: 125000 Hours (Report to be Submitted) Certification: BIS / UL, FCC, CE approval, NDAA Compliant, MAC Address: Proposed IP cameras must be registered in the same name of the OEM. The IP Camera OEM must confirm that the MAC address of the surveillance cameras; OUI must be in the name of the OEM. etc all complete Approved Make: CP PLUS / Mobotix / IDIS / Axis / Avigilon / Sony
94	Supply, Installation, Testing and Commissioning of 5 MP Vandal - Resistant IR Bullet Camera with Heater, 5 MP (2592 x 1944) Resolution, Motorized Vari-focal Lens (f = 3.6 - 10 mm), Aperture F1.8 - 2.8, Min. Illumination Color: 0.2 lux @ F 1.8, B / W : 0 Lux (IR LED ON), Dynamic Range: 120 dB (True WDR), IR cut filter with auto switch, IR Distance (LEDs): 30 Meter, Two Way audio, Alarm in / out, Exposure: White Balance, Self Adjusting, Video Mode (Sharpness, Contrast, Colors, Brightness Control), Video Motion Detection, Active Tampering Alarm, Trip Zone, Video Compression: H.265, H.264 (MP), M-JPEG, IP Camera Protocol: ONVIF Profile S, Quadruple Video Streaming, Trigger Event: Motion Detection, Alarm in, Audio detection, Tampering, Trip Zone, Event Notification Remote: S/W, Email (with Image), Micro SD / SDHC / SDXC, Smart Failover (Up to 256 GB), Analytics events based on AI engine (Person, Vehicle), Object Detection, Intrusion, Loitering, Line Crossing, Face Detection IK10 Vandal Proof Casing, IP67 Outdoor Ready, 3-axis mechanical design for installation, Power Source: 12VDC, PoE IEEE 802.3af (Class 3), Operating Temperature -40°C ~ 60°C, Operating Humidity 0% ~ 90%, MTBF time 125,000 Hours (Report to be Submitted) Certification: BIS/UL, FCC, CE approval, NDAA Compliant, MAC Address: proposed IP cameras must be registered in the same name of the OEM. The IP Camera OEM must confirm that the MAC address of the surveillance cameras; OUI must be in the name of the OEM. etc all complete Approved Make: CP PLUS/ Mobotix / IDIS / Axis / Avigilon / Sony
95	Supply, Installation, Testing and Commissioning of 32 IP Channel Network Video Recorder, H.265 4K Recorder, NDAA Compliant, Embedded Linux, Total incoming throughput 370 Mbps, Supported Camera on ONVIF Latest Protocol, 2 HDMI Ouputs, Recording Resolution up to 12 MP (Depending on IP Camera), H.265, H.264 Video Compression, Recording Mode: Time-lapse, Event, Pre-event, Panic; Trigger Event: (Object Detection, Intrusion, Loitering, Line Crossing, Face Detection), BI (Exceed Occupancy Limit, Social Distancing, Mask Rule Violation, Queue Congestion), Motion, Trip-zone, Tampering, Video Loss, Audio Detection, Alarm In, Network Alarm, Text-in, System etc. Display Resolution: 4K UHD (3840X2160) Resolution, Allow control of PTZ cameras to authorized users and be used to maneuver a PTZ camera using Built-in GUI PTZ control, Features: Sequence Monitoring, Screen Freeze, Covert cameras, Privacy Mask, Color Control (Brightness, Contrast, Saturation, Hue), event monitoring, Audio Codec Format: G.711, G.726, Audio Data Size: 64 Kbps (per channel), Two-way (Bidirectional Audio, Maximum Live Display Speed: Up to 960 ips, Live Digital Zoom: x2 ~ x12, Search Mode: Time-lapse, Event Log, Text-in, Thumbnail, Metadata, HDD: 6 SATA, 4 eSATA, RAID 1 Supported, Event Notification, Email, Callback to Remote S/W, Push Notification, Two-way Audio, 2 USB 2.0, USB 3.0, Built-in 16 channel PoE Switch, Expandable up to 252 TB using eSATA storage, NDAA Compliance, FCC, UL, CE, CB Certified etc all complete Approved Make: CP PLUS / Mobotix / IDIS / Axis / Avigilon / Sony
96	Supply, Installation, Testing and Commissioning of Survilliance Class hard disk of 6 TB HDD etc all complete Approved Make: WD / Seagate / Toshiba
97	Supply, Installation, Testing and Commissioning of ONVIF Compliant S&G VMS , Compatible with linux OS , VMS should have An interface to define layouts and pre-set cameras in multiple view mode , Able to switch between different view pages and devices , Zoom in/ Zoom out digitally by mouse scroll wheel ,Live view with stream 1 in full screen mode or stream 2 in multi-view screen mode (Bitrate adjustable) etc as required to complete the system etc all complete Approved Make: Mobotix / IDIS / Axis / Avigilon / Sony
98	Supply, Installation, Testing and Commissioning of 55\\" Smart Android 4K UHD Professional Display, 24x7 Operation, 440 nits Brightness, Smart Android OS, 4K UHD Resolution, Screen Mirroring through, Airplay/Chromecast, Direct LED, 16 Gb storage, Wi-Fi, 178 Degree Viewing Angle, Landscape / Portrait / Tilt Installation, IP / RS232C Control, 10W+10W Speakers, 4 HDMI 2.0, 2 USB, Power Scheduling, 1200:1 Contrast Ratio, Color Gamut (DCI- P3) 92%, HDMI Auto Wake up. 4K HDR Visual Experience through 4K HDR Processor X1, 4K X-Reality PRO, Triluminos PRO, Motionflow XR, HDR10 / HLG / Dolby Vision etc complete Approved Make: Sony / Christie / NEC / LG.
99	Supply, Installation, Testing and Commissioning of Workstation with Intel Processor I7 or Better, 32GB Memory, 400 GB SSD for OS, 1TB HDD for Local Storage, Gigabit Ethernet, Display Card 4 GB, Windows Operating System (64bit) with Keyboard, Mouse and 21\\" Monitor display etc complete Approved Make: HP / Dell / Lenovo
100	Supply, Installation, Testing and Commissioning of Category 6 UTP Cable - LSZH, High-Speed Gigabit Ethernet UTP 250 MHz Class E Cables for Cat 6 Consists of 23AWG Solid Bare Electrolytic Grade Copper Conductors, HDPE Insulated Twisted 4 Pair, RipCord, and LSZH Outer Jacket, Gigabit Ethernet (1000 Base-T), UL Listed, RoHS Certified in existing concealed/surface conduits / Raceways complete 305 Mtr. Roll, including Penta Scanning for per Copper connectitvity with other raleted testing and services (as per actual) as per specification etc. all complete Approved Make: Belden / 3C3 / Commscope / Siemon/ Derwiser/ Legrand
101	SITC of 19” Rack Mount, 12 Port Multi Mode LIU Panel, preloaded with a pigtails, Splice tray & necessary fiber management accessories etc all complete. as per specification etc. all complete Approved Make: Belden / 3C3 / Commscope / Siemon/ Derwiser/ Legrand
102	SITC of SC-LC MM Fiber Patch Cords ( 3 Mtr), LSZH jacket, meets IEC-60332-1 (LSZH) flame rating for standard safety compliant as per specification etc. all complete Approved Make: Belden / 3C3 / Commscope / Siemon/ Derwiser/ Legrand
103	SITC of SC MM Pigtail (1.0 Meter), LSZH jacket, meets IEC-60332 (LSZH) flame rating for standard safety compliant. as per specification etc. all complete Approved Make: Belden / 3C3 / Commscope / Siemon/ Derwiser/ Legrand
104	SITC of 6 Core Multi Mode Outdoor Fiber Optic Cable, High Link Fiber Optic, Armoured, Multi loose Tube, Outdoor Cable, Gel filled, CSM FRP, Single Sheath Black HDPE, OM4, ROHS Certified with OTDR Scanning for OFC per core connectitvity and uplink test for Point to Point with other raleted testing and services (as per actual) as per specification etc. all complete Approved Make: Belden / 3C3 / Commscope / Siemon/ Derwiser/ Legrand
105	Rack Mountable Layer 2 Distribution Network Switch (for IP CCTV) with POE+ with Min 24 X 10/100/1000 Base-T POE ports with 2 X 1G and 2 X 1/10G (Min) SFP+ ports upgradable to 4 x 10G SFP+ ports with min POE budget of 380 W or better with Fibre transreciever module etc. all complete Approved Make: Cisco / Juniper / HP / Alcatel Lucent
106	Supply, installation, testing & commissioning of IP55 Outdoor Junction Box For Field Devices at camera side. JB must be of appropriate size to house different components as per CCTV system design confirming.
107	SITC of 10/100/1000 port Multi mode optical media converter or fibetr transreciver as required at site etc. all complete Approved Make: Cisco / Juniper / HP / Alcatel Lucent
108	SITC of 4 Port Industrial Grade Switch for Perimeter Camera, Advanced Industrial PoE capabilities with support for HPoE (60 W), IEEE 1588v2 PTP support, Operates at a wider temperature range, withstands greater shock, vibrations, surge and EMI/EMC variance, 4 RJ-45 10/100/1000 Base-T PoE+ ports out of which 2 ports are 60W PoE capable, 2 100/1000 Base-X SFP ports, RS-232 Console (RJ45) all required accessories etc. all complete Approved Make: Cisco / Juniper / HP / Alcatel Lucent
109	24U (W 600mm/ D 600mm) Floor mount with front glass door, back steel door and side panels, Accessories of rack With lock & key for all side panels & door, Fan Housing Unit with 4 fans, Cable manager 4U Horizontal x 8, Cantilever tray, AC main Channel 06 points 5 Amp (PDU) ,Earthing Kit, Mounting Hardware (Pack of 10) as per specification etc. all complete Approved Make: Valrack / Netrack / CPMG / President/ APW/Poweride/Derwiser.
110	SUB-HEAD - Public Address system
111	Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
112	Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
113	Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.
114	Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
115	Supplying, installation, testing & commissioning of exit point directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required.
116	Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
117	Supplying & laying of 2x1.5 sqmm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
118	Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.:- speaker cable Two pair, 2-core, 1.5 sqmm
119	Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.:- speaker cable Four pair, 2-core, 1.5 sqmm
120	SUB-HEAD D- IP-PBX System
121	Supply of 24 Button IP Digital Telephone Type 1 Senior Executive Phone having 4.3 Inch Tiltable Backlit LCD display, min 10 lines x 40 characters per line LCD display with adjustable angle, Separate Visual Message Wait Indicator Lamp with multicolour option, Minimum 36 flexible programmable keys with dual colour LED, Dial Pad, 4 soft keys, 4 Way Navigational Keys, 20 Fixed DSS function keys, Full Two Way Duplex speaker phone, RJ9 Headset Port, Analog adaptor for ringer and modem support, Wide Size Incoming Lamp with multi colour support, Adjustable Handset and Monitor speaker volume, Add-on support of 20 Key DSS support having Dual colour LED without consuming any additional digital port, ROHS Compliant etc.As per tender specs and should be from Same OEM, Phone must be TEC-ER & EMI EMC Approved & OEM must be registered on Telecom trusted portal & product must be class-I local suppplier with 50% Local content etc. all complete Approved Make: Alcatel Lucent / Unify / NEC / Cisco / Coral/Panasonic
122	SITC of 12 Button IP Digital Telephone Type 2 Phone having 2.8 Inch Tiltable Backlit LCD display, 4 lines x 16 characters per line LCD display with adjustable angle, Separate Visual Message Wait Indicator Lamp with multicolour option, Minimum 20 flexible programmable keys with dual colour LED, Backlit Dial Pad, 4 soft keys, 4 Way Navigational Keys, 8 Fixed function keys, Full Two Way Duplex speaker phone, RJ9 Headset Port, Analog port adaptor for ringer and modem support, Wide Size Incoming Lamp with multi colour support, Adjustable Handset and Monitor speaker volume, Add-on 8 Key DSS support having Dual colour LED without consuming any additional digital port, ROHS Compliant etc.As per tender specs and should be from Same OEM, Phone must be TEC-ER & EMI EMC Approved & OEM must be registered on Telecom trusted portal & product must be class-I local suppplier with 50% Local content etc. all completeApproved Make: Alcatel Lucent / Unify / NEC / Cisco/Coral/Panasonic.
123	Supply, Installation, Testing and Commissioning of 6 Button Digital Telephone Type 2 IP Phone having 3 Inch Tiltable Backlit LCD display, 4 lines x 6 characters per line LCD display with adjustable angle, Separate Visual Message Wait Indicator Lamp with multicolour option, Minimum 6 flexible programmable keys with dual colour LED, Backlit Dial Pad, 4 soft keys, 4 Way Navigational Keys, Fixed function keys, Full Two Way Duplex speaker phone, RJ9 Headset Port, Analog port adaptor for ringer and modem support, Wide Size Incoming Lamp with 7 colour support, Adjustable Handset and Monitor speaker volume, As per tender specs and should be from Same OEM etc. all complete Approved Make: Alcatel Lucent / Unify / NEC / Cisco/ Tadiran/Coral/Panasonic
124	Supply, Installation, Testing and Commissioning of, TEC-GR Type I, II & III approved IMS IP-PBX System, SIP Compliant, 19\\" 2U Rack Mount design, standalone system port capacity upto 1000 Ports and further expandable upto ports over SIP Standard networking, 50 Ch. VOIP resource, in-skin 10 port MCU for integrating VC equipments, 10 port web based video conference bridge further expandable upto 32 Ports, 40 ports voice logger, Seamless 4G/5G communication with wired comunication including BLF on IP Phone of mobile ringing etc and upto 30,000 call buffer support and equipped with:PRI (30 Channel)- 1 Nos.IP/ SIP Extension License- 50 Nos.OEM must be registered on Telecom trusted portal & product must be class-I local suppplier with 65% Local content etc. all complete.Approved Make: Alcatel Lucent / Unify / NEC / Cisco / Coral / Panasonic.
125	Supply, Installation, Testing and Commissioning of Rack Mountable Layer 2 Distribution Network Switch, 24 X 1G RJ-45 PoE+ Ports with 380W power budget, 2 x 1G/10G SFP+ Ports and 2 x 1G SFP/Base-T Combo Ports upgradable to 2 x 1/10G SFP+ Ports, Internal Power Supply, Upto 4 Switches or more Virtual Chassis/ Stacking Option, Switching Capacity and forwarding Rate: 128 Gbps or better and 68 Mpps or better, Static Routing, MSTP, RSTP, PVST+,IPv6 Tunneling, LACP, LAG, IGMPv3, DHCP, DHCP82,DHCP Relay for IPv4/IPv6,Multiple microcode image support with fallback recovery, ARP,SDN support through Restful API and openflow 1.3.1, Loopback IP address support for management per service, Policy- and port- based mirroring, Remote port mirroring, sFlow v5 and Remote Monitoring (RMON), Unidirectional Link Detection (UDLD),Digital Diagnostic Monitoring (DDM), LLDP-MED, NTP,MVRP, SNMP, sflow or equivalent with SFP Module should be of same make as switch,etc. all complete Approved Make: Cisco / Juniper / HP / Alcatel Lucent/ Tadiran / Coral / Panasonic
126	Supply, Installation, Testing and Commissioning of 24 port Cat 6 patch panels available with block of four equipped with tool less IO, Rack Mountable. 19\\" Modular Patch Panel, loaded CAT6 U/UTP 24port LCS2 rack mountable to be compatible in 4nos of 6 X RJ 45 Tool less connector U/UTP unit in a block etc. all complete Approved Make: Belden / 3C3 / Commscope / Siemon/ Derwiser/ Legrand
127	Supply, Installation, Testing and Commissioning of CAT6 UTP Patch Cord- 1 mtr-in Blue colour etc. all complete Approved Make: Belden / 3C3 / Commscope / Siemon/ Derwiser/ Legrand
128	Supply, Installation, Testing and Commissioning of Floor Standing Network Rack - 42U / 600w / 800d, with Aluminium Frame for rigidity. Top cover with FHU provision. Top & Bottom cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs. etc. all complete Approved Make: Valrack / CPMG / Netrack/ Derwiser/ Legrand/Poweride
129	Supply, Installation, Testing and Commissioning of 24 port Cat 6 patch panels available with block of four equipped with tool less IO, Rack Mountable. 19\\" Modular Patch Panel, loaded CAT6 U/UTP 24port LCS2 rack mountable to be compatible in 4nos of 6 X RJ 45 Tool less connector U/UTP unit in a block etc. all complete Approved Make: Belden / 3C3 / Commscope / Siemon Derwiser/ Legrand/Poweride
130	SUB HEAD-E- ACCESS CONTROL SYSTEM
131	Supply, Installation, Testing and Commissioning of Multi Modal Face Recognition cum Fingerprint, Smart Card & Password based Reader, 5\\" Touch Screen LCD, Android OS, 2GB RAM, 16GB ROM, 256 bit encrypted algorithm to protect important information such as personal info transmitted, Support TLS standard security communication protocols, Live Face Detection with anti-spoofing against 2D photograph, mobile selfie and video, Fake Fingerprint Detection Technology, 50,000 Face Storage capacity (1:N), 50,000 Fingers (1:N) / 50,000 Fingers (1:1), 500000 Log capacity, storage, 20,000 Image logs, Onboard Dual Camera, supports Face authentication & verification from up to 3 meters, Communication protocols like TCP/IP, Wiegand Out / IN, RS 485, SD Card, Anti Pass back (Local / Global), Blacklist Employee Management, User wise authentication modes; Built in Lock Control; Mask Detection & Alert (configurable); Thermal Module integration for Body Temperature Detection (Optional), Up to 25,000 lux illumination, UL Listed Power Supply, CE, FCC, RoHS, BIS, certifications etc. suitable for mounting on metal surface/metal frames/ wooden frames / wall / flap barriers or as required based on site conditions including all accessories complete as per specifications. Approved Makes: Secureeye / Essl / Timewatch / HID/ Honeywell/ Smart-I
132	Supply, Installation, testing and commissioning of Double leaf EM Lock with 1200LBS (600 LBS each) , Collinear Load Test 560 kg,1200 lbs, Operated Voltage 12 / 24 / 48 V DC (optional), MOV Provides Reverse Current Protection, Suitable For Wooden Door, Glass Door, Metal Door, Fireproof Door, Anti-Residual Magnetism Designed High Strength Material, Anodized Aluminum Housing, Design with no Mechanical Bolt, CE Certified capacity etc all complete Approved Makes: Secureeye / Essl / Timewatch / HID/ Honeywell / Smart-I
133	Supply, Installation, testing and commissioning of Emergency Push Button NO NC Based Stainless Steel, for manual door release etc all complete Approved Makes: Secureeye / Essl / Timewatch / HID/ Honeywell/ Smart-I
134	Supply, Installation, testing and commissioning of ZL Bracket for 600lbs EM Lock etc all complete Approved Makes: Secureeye / Essl / Timewatch / HID/ Honeywell / Smart-I
135	Supply, Installation, testing and commissioning of 8 core 1.0mm Cable. Approved Makes: POLYCAB/FINOLEX/BELDEN
136	Supply, Installation, Testing and Commissioning of POWER SUPPLY UNIT 12V/ 2 AMP
137	Supply, Installation, Testing and Commissioning of ACCESS CONTROL SOFTWARE FOR PC As per the details enclosed (Entreprise Version).
138	SUB HEAD-F- IT/NETWORKING WORKS
139	Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface / recessed steel / PVC conduite as required :- 1 run of cable
140	Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface / recessed steel / PVC conduite as required :- 2 run of cable
141	Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface / recessed steel / PVC conduite as required :- 3 run of cable
142	Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.:- 25 mm
143	Supply and Receving,storing,installation,testing & commissioning of 1 Mtr Cat 6 patch cord with 23 AWG suitable for Gigabit connection, it should be suitable to maintain the bending radius as per relevant code.
144	Supply and Receving,storing,installation,testing & commissioning of 2 Mtr Cat 6 patch cord with 23 AWG suitable for Gigabit connection, it should be suitable to maintain the bending radius as per relevant code.
145	Supply and Receving,storing,installation,testing & commissioning of Cat 6, SFP Sswitching capacityh 24 port loaded rack mountable switches. The panel should be fully unshielded.
146	Supply, Installation, Testing and Commissioning of fully loaded Networking Floor Standing Rack of 28U along with PDU (With surge protection), cable manager, fan etc for Switches, Servers & other accessories etc, complete as required.(At each Floor)
147	Providing Instaltion, testing commisioning Penta testing, Documentation & Certification of Cat6.
148	OFC Backbone Connectivity
149	Supply and Receving,storing,installation,testing & commissioning of 6 Core OM3 Outdoor Armoured PE OFC
150	Supply and Receving,storing,installation,testing & commissioning of Fiber Optic Drawer 24 LC duplex Multimode - LIU Loaded
151	Supply and Receving,storing,installation,testing & commissioning of LC Pigtails MM 50/125mn 1 Mtr
152	Supply and Receving,storing,installation,testing & commissioning of SC/LC Duplex Patch Cords OM3 - 3 mtr
153	Supply and Receving,storing,installation,testing & commissioning of LC/LC Duplex Patch Cord OM3 - 3 mtr
154	Providing & Fixing of Digital ISDN Key Telephone System in capacity of 02 CO 100 digital Extensions expandable up to 250 extension ,six number digital key telephone and 80 nos caller id phone with 200 pair MDF box. With the following Exclusive Features besides the Standard: Inbuilt CLI on KTS&PBTInbuilt Battery ChargerInbuilt Music on HoldInbuilt Unsupervised ConferenceInbuilt External Call ForwardingInbuilt 8 IP ResourcesHybrid Extensions(Analog/Digital)Inbuilt Voice Mail/AutoattendantInbuilt 4 Party Web Based Video ConfLic(Lan)
155	Supply, installation, testing, commissioning & configuration of Core Switch : Layer 3 Switch with 24x 1G/10G SFP+ Ports , additional 4x1/10G SFP/SFP+ ports and 2x 40G/100G QSFP+ Port from Day 1. 1x 40 G Passive Direct attached Copper cable (DAC) cable 1m , 16x 10G Short reach ,8x 10 GLong Reach with Hot-swappable Redundant Power Supply and Fans , 3 Years Next Business Day (NBD) Warranty (Make- D-Link/Netgear/HP Aruba
156	SUB HEAD-G- Boom Barrier System
157	Supply, Installation, Testing and Commissioning of Automatic Electromechanical Boom Barrier Suitable road width upto 6 meter for intensive applications, high speed with 6 second opening / closing time with Anti corrosive high strength MS 7 tank powder coated housing with dual colour, IP 67 Protection etc.(for Gate Entry / Exit) Safety sensors to be provided for preventing any accidental damage while closing, MCBF-5 Million cycle, Drive Unit: Heavy Duty Gear Motor. Intelligence: The barrier shall use a suitable AC Drivefor smooth functioning of the equipment. Possibility for integration via standard user interfaces. Power: 230+/- 10% VAC, 50 Hz. Power Consumption: Max 60 Watt, Operating Temperature: -20 Deg to 60 Deg C, Certifications: ISO- 9001:2015, IS0 -14001:2015 , CE, RoHS Certified, IP-67 Certification , Environmental test certified, Input Tolerance test Certified, Surge protection test certified from govt accredited lab from Government accredited lab Valid lab test reports to be submitted with technical bid, Housing dimension - 355mm x 245 mm x 1080 mm etc all complete Approved Make: Speedgatz / Synergy Access / Kaba
158	Supply, Installation, testing and commissioning of i5 Infrared Beam Set, Infrared-Safe beam sensor consisting of transmitter and receiver for preventing accidental damage to vehicles etc all complete Approved Make: Speedgatz / Synergy Access / Kaba
159	Supply, Installation, testing and commissioning of Mounting Post for PE Sensor with canopy on top etc all complete Approved Make: Speedgatz / Synergy Access / Kaba
160	Supply, Installation, testing and commissioning of HELIX Receiver, Integrated inside the control panel, Two Channelsetc all complete Approved Make: Speedgatz / Synergy Access / Kaba
161	Transmitter, Silicone 2 Buttonetc , Wirelessly to be operated from a distance of approx 20 mtrs with clear sightall complete Approved Make: Speedgatz / Synergy Access / Kaba
162	SUB HEAD - AIR CONDITIONING / VRV/VRFSystem
163	Supply, Installation, testing and commissioning of AIR COOLED & INVERTER BASED VARIABLE REFRIGERANT VOLUME / VARIABLE REFRIGERANT FLOW MODULAR TYPE AIR CONDITIONING SYSTEM with R410A suitable for 415 ± 10% , 50 Hz. The unit shall consist of indoor units and external condensing units and other accessaries as listed below complete in all respects as under:
164	Outdoor Unit :- Supply, Installation, testing and commissioning of Modular type outdoor units equipped with Heating and Cooling mode highly efficient inverter type scroll compressor(s) with special precoated heat exchanger, low noise condenser fan housed in compact housing duly powder coated. Outdoor units shall have environmet friendly refrigerant R-410A.The C.O.P shall be confirmed by vendor at full and part load at ambient temperature..Complete with M.S mounting stand of approved design for outdoor unit.Nitogen Flushing before gas charging.Pressure testing should be done after installation.Anti corrosive coating should be done at site.
165	40 HP
166	36 HP
167	Indoor Units :- Supply,Installation, testing and commissioning of both interconnected with copper refrigerant & drain pipe of required length, insulation, full charge of refrigerant gas and oil, M.S. base frame duly primered & painted, supports etc. complete as per specifications and drawings. SITC of Air Cooled VRV/VRF Cassette type Indoor units equipped with pre-filter, fan section with low noise fan, multispeed motor, coil section with DX coil, electronic expansion valve, outer cabinet, insulation, pipe connections,control and power panel with corded remote control etc. Unit mounted air purification system with Advanced Oxidation Plasma Hydroxyl cells comprising of UVC lamp 254 NM (no ozone) on nanoX coating metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly casing tube, with the capability to produce ionized Hydroxyl oxidizers using plasmoX along with Antimicrobial coating EPA Approved. The unit shall have inbuilt multipin ion generator pins (+- ions 10^6). The cell will have built in LED indication system stating the operation of the system. The power / control cabling between the Pentagon units and the power source / controls shall be included in the cost. The wattage of the lamp shall not be less than 13 watts for CFM upto 1200 CFM and 21 watts upto 5000 CFM. The system shall be capable of reducing microbial bacteria, virus and spores , VoC’, odors and particulates matter. The equipment shall have to CE, ISO 13485, ROHS with 2014/35/EU Low Voltage Directive as well have ICMR approved lab/ CSIR certiffication for COVID-19 certififcation with a kill rate of greater than 99% within 45 mins. The product shall have Green Pro certification. The specific certifications shall be submitted along with the technical submital. The pentagon cells should be selected by considering a load factor calculation for each specific area where the equipment is to be installed. The Cells Should be complete with Transformers, control cabling and Plug Top & necessary power cable. The units shall be 100 percent manufcaturered in India. Vendor to comply all Tender Specifications. etc. of various capacities as per specifications and drawings
168	2.01 TR
169	1.28 TR
170	1.02 TR
171	Ductable Unit (for VRV): - Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V± 10%, 50 Hz complete as required. The unit shall have automatic force shut down provision in case of fire on receiveing signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.Air Decontamination Chamber in the supply air/ plenum comprising of nanoX coating plasmOX having EPA approved metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers using plasmoX along with Antimicrobial coating EPA Approved. The unit shall have inbuilt multipin ion generator pins (+- ions 10^6). The cell will have built in LED indication system stating the operation of the system.
172	Ductable Unit (for VRV):- The power / control cabling between the Pentagon units and the power source / controls shall be included in the cost. The wattage of the lamp shall not be less than 13 watts for CFM upto 1200 CFM and 21 watts upto 5000 CFM. The system shall be capable of reducing microbial bacteria, virus and spores , VoC’, odors and particulates matter. The equipment shall have to CE, ISO 13485, ROHS with 2014/35/EU Low Voltage Directive as well have ICMR approved lab/ CSIR certiffication for COVID-19 certififcation with a kill rate of greater than 99% within 45 mins. The product shall have Green Pro certification. The specific certifications shall be submitted along with the technical submital. The pentagon cells should be selected by considering a load factor calculation for each specific area where the equipment is to be installed. The Cells Should be complete with Transformers, control cabling and Plug Top & necessary power cable. The units shall be 100 percent manufcaturered in India. Vendor to comply all Tender Specifications. etc. of various capacities as per specifications and drawings
173	5.48 TR
174	3.18 TR
175	Fresh air unit (for VRV): :- Supply, installation, testing and commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type Treated Ftesh AIr unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., Unit mounted air purification system with Advanced Oxidation Plasma Hydroxyl cells comprising of UVC lamp 254 NM (no ozone) on nanoX coating metallic compound of five metals targeted on Alumninum matrix cell duly enclosed by a poly casing tube, with the capability to produce ionized Hydroxyl oxidizers using plasmoX along with Antimicrobial coating EPA Approved. The unit shall have inbuilt multipin ion generator pins (+- ions 10^6). The cell will have built in LED indication system stating the operation of the system. The power / control cabling between the Pentagon units and the power source / controls shall be included in the cost. The wattage of the lamp shall not be less than 13 watts for CFM upto 1200 CFM and 21 watts upto 5000 CFM. The system shall be capable of reducing microbial bacteria, virus and spores , VoC’, odors and particulates matter. The equipment shall have to CE, ISO 13485, ROHS with 2014/35/EU Low Voltage Directive as well have ICMR approved lab/ CSIR certiffication for COVID-19 certififcation with a kill rate of greater than 99% within 45 mins. The product shall have Green Pro certification. The specific certifications shall be submitted along with the technical submital. The pentagon cells should be selected by considering a load factor calculation for each specific area where the equipment is to be installed. The Cells Should be complete with Transformers, control cabling and Plug Top & necessary power cable. The units shall be 100 percent manufcaturered in India. Vendor to comply all Tender Specifications. etc. of various capacities as per specifications and drawings
176	741 CFM
177	1377 CFM
178	Installation &Allied Works : - Y-joints & header etc above complete as per specification and drawings.
179	Supply,Installation, testing and commissioning of Centralised Analog remote controllers for operation & status monitoring of VRV/VRF indoor units
180	Refrigerant Piping (For inside the Building) :- Supply,installation,testing and commissioning of Interconnecting refrigerant pipe work with (19mm/13 mm thick) , Class 'O', k value-0.035 w/mk minimum, Density not less than 55 Kg/cu.m closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported with MS hanger & clamps
181	41.3 mm O.D. (insulation : 19 mm)
182	34.9 mm O.D. (insulation : 19 mm)
183	28.6 mm O.D. (insulation : 19 mm)
184	22.2 mm O.D. (insulation : 13 mm)
185	19.1 mm O.D. (insulation : 13 mm)
186	15.9 mm O.D. (insulation : 13 mm)
187	12.7 mm O.D. (insulation : 13 mm)
188	9.5 mm O.D. (insulation : 13 mm)
189	6.4 mm O.D. (insulation : 13 mm)
190	Refrigerant Piping: (For Outside the Building :- Supply,installation,testing and commissioning of Interconnecting refrigerant pipe work with (19mm/13 mm thick) , Class 'O', k value-0.035 w/mk minimum, Density not less than 55 Kg/cu.m closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping to be coated with two layers of glass clothe dipped in lag coating for mechanical protection against sun light.
191	41.3 mm O.D. (insulation : 19 mm)
192	28.6 mm O.D. (insulation : 19 mm)
193	19.1 mm O.D. (insulation : 13 mm)
194	15.9 mm O.D. (insulation : 13 mm)
195	Inline Fans :- Supplying, Installing, Testing and Commissioning of Inline fans complete with motor, supporting frame, gravity louvres,etc. as per drawings and specifications. @ 15mm Static.
196	350 CFM Inline Fan
197	1600 CFM Inline Fan
198	Ducting :- Supply, fabrication, installation, balancing and commissioning of factory/ site fabricated GI sheet metal Oval ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings of following gauges as per SMACNA standard:- G.I. Sheet Metal Ducting (Rectangular)
199	Thickness 24 G sheet
200	Thickness 22 G sheet
201	Duct Insulation-Supply, installation, testing of thermal insulation of supply air ducting with closed cell Nitrile Rubber with prelaminated Aluminium foil on one side having a low stable k value of 0.035 k.cal/hr.m at 10.C and minimum density of 40-55 ± 3 kg/cum.The R.value should be as per ECBC Code. :- 19mm
202	Duct Acoustic Lining-Supply & Installation of Acoustic insulation GI Supply air ducts. Acoustic material shall be 15 mm thick open cell elastomeric foam class '1,UL-94HF. The density shall be 180 kg.m3 with thermal conductivity of 0.042 W/ m Deg K.Material shall have anti-bacterial and anti-fungal properties The insulation shall be as per technical specification and drawings etc, All joints to be sealed with anti condensation tapes. :- 19 mm
203	Grilles/Diffusers: Supply,installation, testing and commissioning supply and return air grilles/ diffusers as per specifications and drawings including fixing frame of G.I./wooden in false ceiling/walls.
204	Aluminium supply air grill with VCD
205	Aluminium return air grill without VCD
206	Fresh / Exhaust air louvers with bird screen & damper
207	Drain Piping: Supply,installation,testing and commissioning of rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber class ‘O’ . Providng and fixing pipes with all necessary fittings, supports and insulation. :- 25 MM
208	Drain Piping: Supply,installation,testing and commissioning of rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber class ‘O’ . Providng and fixing pipes with all necessary fittings, supports and insulation. :- 32 MM
209	Drain Piping: Supply,installation,testing and commissioning of rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber class ‘O’ . Providng and fixing pipes with all necessary fittings, supports and insulation. :- 40 MM
210	Control & Transmission Wiring :- Supply,installation,testing and commisioning of control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable 25 MM PVC conduits between indoor and out door unit & outdoor units to central remotes controllers.
211	TOILET ODOR CONTROL SYSTEM :- Supply, installation, testing and commissioning of wall mounted HygieneOX unit which is advance oxidation with nanoX & plasmOX based system. Advance oxidation plasma using unique wave-length photon special metal catalyst layer with the capability to generate Hydroxyl to eliminate contamination in the conditioned space. The system shall have an independent centrifugal fan and on/ off switch. The equipment shall be enclosed in PU coated material for durability and better aesthetics. The units should be designed after undertaking a load factor calculation for each specific area where the equipment is to be installed. The load shall clearly state the number of units required. The system shall be capable of eleminating bad odors, VoC's as well as bacteria, virus, spores and particulates matter. Contaminated Air will be Sucked from one Side and Decontaminated Air will come out from other side. The equipment shall have to GreenPro,CE,ISO 13485,TUV,ROHS with 2014/35/EU Low voltage directive along with FDA compliance certifications. The system shall have a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from CCMB lab with a minimum efficiency of 99 percent against SARS Cov-2 within 45minutes. '50 to 250 Sqft
212	Air Curtains :- Supply, installation, testing and commissioning of Galvanized steel housing with baked powder coat finish of air curtains at all open exists as mentioned in drawings and should be as per specification and drawings sizes are as follows.:- a) 7.8 feet length, 21-23 m/s
213	BMS WORK STATION
214	Supply, installation, testing and commissioning of BMS Computer System: i7 Processor, latest generation, 2.5GHz, 4MB Cache with 16 GB RAM, & 1 TB SSD, 10/100 Mbps Ethernet card, USB connection & internal modem, Microsoft(R) Windows(R) 10 OS Professional Enterprise or latest, Web server software, DVD-ROM Drive (with RAM), 100/1000 Mbps NIC for Network connection and anti virus software as per Tender Specifications. Accessories included 50 Inch LED Screen, Optical Mouse & Key Pad, Windows Licensed software compatible with the above BMS System configuration complete as required.
215	Supply, installation, testing and commissioning of Laserjet A4 Black and White printer
216	Supply, installation, testing and commissioning of 24 Port Layer 2 switch, with SFP Module, rack mountable& other termination accessories (Like Pigtails / LIUs / Convertors / Patch Cord, Etc) complete as required.
217	Application Software :- Supply, installation, testing and commissioning of the following window based graphical software for IBMS system with 1 No. Client for Operator workstation. The Software shall have 3D & HD vector dynamic graphics with Autocad import of plan with Zoom In & Zoom Out facility, Native 64 Bit System, Multi-Monitor Support-( Max 4 Nos), Multi-language support, BTL, UL, EN Certified System, BACnet Profile B-AWS (Advanced workstation) as per the BTL Listing, dot net platform, Certified OPC DA Server by OPC Foundation, Web-Based Server software shall permit use of Standard Web-Browsers such as Microsoft Internet Explorer, Netscape Navigator, etc. The Software shall comply to international standards and strive to deliver products that meet security standards such as ISA/IEC 62443, UL2900, ISO/IEC 27001, ISO/IEC62443 and OWASP. Cybersecurity audit trail, 4-eye principle, Seamless integration of certificates within customer IT infrastructure, Microsoft’s active directory-based authentication, Use of network infrastructure that supports physical network or VLAN segmentation, Placing the web server in a “demilitarized zone” (DMZ), End-to-end encryption, from client to server, End-to-end encryption between servers, Certificate-based data exchange, Encrypted backups. Supply, installation, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, inbuilt web browser, peer to peer communication, interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch, WLAN interface and Cloud Connectivity. The controller shall have min 12 inputs/outputs inbuilt and can be expandable upto max 40 points by Input/Output Modules. The DDC shall have 300 Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. The controller shall be freely programmable and have System functions (alarming, scheduling, trending, access protection with individually definable user profiles and categories). It should have one integration port inbuilt and port for POT for local interface. (Make Seimens / Honnywell). The above shall be housed in vandal proof, lockable & secure MS Cabinets to be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future expansion.
218	DDC for Electrical System HT/LT Panels
219	DDC for Fire Fighting system along with tanks
220	DDC for Plumbing pumps and tanks
221	Supply, installation, testing and commissioning of True IP Based BTL & UL Listed for third party integration. The controller shall have 2-port Ethernet switch, WLAN interface and Cloud Connectivity. It should have BTL label (BACnet communications passed the BTL test) and consisting of Dual microprocessor with Storage capacity of 1 GByte RAM. It should support Real Time clock upto 7 Days. It should Support of the major communication protocols: BACnet/IP, BACnet MS/TP, Modbus IP and Modbus RTU upto 500 points. (Note - Integrator shall be of same DDC make only.)Integration of VRV/VRF on Bacnet/IP or Modbus over RS485 Integration of UPS on Modbus/IP or SNMP Integration of DG Sets on Modbus over RS485 Integration of KWH Meters Modbus over RS485 Integration of HT Power Meter on Modbus over RS485 Integration of Lifts on Modbus over RS485 Integration of FAS & PA on Bacnet/IP or OPC or Modbus/IP Integration of CCTV on Industry standard Open Protocol Field instruments (Make Seimens / Honnywell) Supplying, installing, testing and commissioning of the following sensors / transducers / transmitters. (A) VRV / (B) LIFTS / (C) FIRE ALARM SYSTEM / (D) ENERGY METERS / (E) TRANSFORMERS / (F) DG.
222	Outside Temperature & RH Sensor along with IP65 radiation shield for outdoor protection Measuring Accuracy at At 15…35 °C 0…100 % r.h.: ±2 % r.h
223	Flameproof Level Switch
224	Water pressure sensor
225	Differential pressure switch
226	Bi Level Switch
227	IAQ Monitoring Sensor
228	Cabling and Conduiting
229	Supply and laying of 2 Core 1.0 Sqmm Annealed Tinned Copper, Twisted pair, Shielded unarmoured cable for signal and power as per specifications
230	Supply and laying of Cat-6 unarmoured cable with required jacks and points
231	Supply and laying of MS Conduit 25 mm Size with all accessories
232	Supply and laying of GI Flexible 25 mm
233	(WET RISER SYSTEM - PUMPING EQUIPMENTS)
234	PUMPING EQUIPMENTS): - Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump). Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. :- 450 lpm at 35 m Head
235	(HYDRANTS SYSTEM) :- Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :- Single headed Stainless steel
236	Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : :- Stainless Steel (Grade 304)
237	Supplying & fixing 63 mm dia gun metal short branch pipe with 20mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304)
238	Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 . 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.:- 30 m
239	Supplying, installation, testing and commissioning of weather proof M.S cabinet size 900 mm wide x 2100 mm height x 600mm deep fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following. Gunmetal single headed Hydrant valve - 1 No./ Fire Hoses 63mm, 15 M long with accessories - 2 Nos./ Short branch - 1 No./ First Aid hose Reel - 1 No./ Fire Extinguisher - 2 Nos. / Fireman's Axe - 1 No./ Pressure Gauge - 1 No. :- The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade.
240	Supplying, installation, testing and commissioning of fire brigade connection of cast iron body with gun metal male & female instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required ::- 2 way - 100 mm dia M.S. Pipe
241	Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
242	Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
243	Providing and fixing standard fire man's axe with heavily insulated rubber handle complete as required.
244	(PIPING, VALVES AND ACCESSORIES):- MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required ::- 100 mm dia
245	Providing, Installation, Testing and Commissioning of Gun Metal / Bronze Ball Valves screwed ends of following sizes as required. (PN-1.6):- 25 mm dia
246	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required ::- 80 mm dia
247	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required ::- 100 mm dia
248	Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required ::- 100 mm dia
249	Providing and fixing single acting air valve with screwed inlet 25 mm dia.
250	(FIRE EXTINGUISHERS):- Providing and fixing ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with inernal charge. :- 6 kg capacity cylinder
251	Supply, installation, testing and commissioning fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed conforming IS : 15683:2006 :- 4.5kg capacity cylinder
252	Providing and fixing Kitchen fire extinguisher (K-Type) Fire extinguishers Suitable for Kitchen fire in Industrial, hospital, malls, Schools, College Etc. IS : 15683 latest revision manufacturer and of CRCA sheet in welded construction, finish with epoxy polyster powder coated complete with brass forged ball valve, gun metal cap and nozzle, including initial filled and wall suspension bracket (suitable for fighting in class 'A', B & 'C' that is wood, textile, flammable liquid, electric and gases.:- 4.0kg capacity cylinder
253	Supply, installation, testing and commissioning of Clean agent Fire Extinguisher mfd to IS:15683 with BIS mark, Brass forged squeeze lever discharge valve (CE MARKED WITH NRV), fitted with pressure indicating guage (CE MARK - 3N APPROVED) with direct nozzle, wall mounting bracket & screw, duly charged . FIRE RATING 1A, 8B:- 5.0kg capacity cylinder
254	(ELECTRICAL PANEL):- Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved for 7.5 HP fire terrace booster pump
255	PLUMBING SERVICES WORKS
256	Proving, Installation, testing and commissioning of variable frequency drive pumping system 1 set comprising of vertical stainless steel pumps with single VFD, pressure transducers, common frequency invertor which should be transferable from one to other depending on demand of flow and electronic pressure/level switch and interconnecting cables for dry run protection. The pumps shall be automatically sequenced for alternate start. All components shall be mounted on a common structural base frame with suction and delivery headers, gauges, valves and non return valves at suction/delivery, cabling between panel and pumps as per specifications.Hydro booster vessel of approx. 200/100 liters capacity with interchangeable butyl rubber membrane shall be mounted on the system. Vendor to confirm the capacity of tank and pressure rating. Each pump shall confirm to the following specification. DOM Water Transfer Pumps / HP :2.0(Approx.) or as required./ Quantity : 2 Nos. (1 working + 1 stand by )
257	FLUSH Water Transfer Pumps :- HP 1.0 (Approx.) or as required.: - Quantity : 2 Nos. (1 working + 1 stand by )
258	Hydropneumatic Booster system (For DOM SUPPLY): - Providing fixing and commissioning suitable complete composite hydropneumatic system (factory fitted) consisting of horizontal/vertical multistage centrifugal pump having stainless steel (SS304) impellers, shaft and housing, with single mechanical seal and pressurised tank of necessary capacity, complete with all standard accessories including pressure switch, pressure gauges, non-return & isolating valves, with necessary protection and operational devices i.e alternate pumping operation and shut-off during dry running conditions etc. with suitable electrical motor to be operated on 210/220 or 400/440 volt 50 cycle AC supply, suitable for following duty and with total no. of pumps - 2 nos.(1 working+1standby) complete with Control Unit Panel, manifolds & chassis, as per the approval of Engineer-in-charge. / HP :1.0(Approx.) or as required. / No. of Pumps/Set : 1 ( 1 Working + 1 Standby )
259	Hydropneumatic Booster system (For FLUSH SUPPLY):- Providing fixing and commissioning suitable complete composite hydropneumatic system (factory fitted) consisting of horizontal/vertical multistage centrifugal pump having stainless steel (SS304) impellers, shaft and housing, with single mechanical seal and pressurised tank of necessary capacity, complete with all standard accessories including pressure switch, pressure gauges, non-return & isolating valves, with necessary protection and operational devices i.e alternate pumping operation and shut-off during dry running conditions etc. with suitable electrical motor to be operated on 210/220 or 400/440 volt 50 cycle AC supply, suitable for following duty and with total no. of pumps - 2 nos.(1 working+1standby) complete with Control Unit Panel, manifolds & chassis, as per the approval of Engineer-in-charge. HP 1.0(Approx.) or as required. / No. of Pumps/Set : 1 ( 1 Working + 1 Standby )
260	Providing and fixing Butter fly valve Rated for PN16 pressure rating including rubber gasket, flanges, nuts, bolts, washers & painting complete as required. :- 25 mm dia
261	Providing and fixing Butter fly valve Rated for PN16 pressure rating including rubber gasket, flanges, nuts, bolts, washers & painting complete as required. :- 32mm dia
262	Providing and fixing Butter fly valve Rated for PN16 pressure rating including rubber gasket, flanges, nuts, bolts, washers & painting complete as required. :- 40mm dia
263	Providing and fixing gun metal non- return valve of approved quality(screwed end) :- 25 mm dia
264	Providing and fixing gun metal non- return valve of approved quality(screwed end) :- 32mm dia
265	Providing and fixing gun metal non- return valve of approved quality(screwed end) :- 40mm dia
266	Providing and fixing in position the industrial type pressure gauges with gunmetal / brass valves complete as required
267	Providing & fixing C.I. 'Y' Strainer (screwed / flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flanges / union nuts, bolts& washers complete as required (on pump suction). : -32 mm dia
268	Providing and fixing of Rubber Flexible Coupling with Control Unit PN:16including Matching flanges & fastner. :- 32mm dia
269	Providing and fixing of Rubber Flexible Coupling with Control Unit PN:16including Matching flanges & fastner. :- 40mm dia
270	EXTERNAL ELECTRIFICATION
271	COMPACT SUBSTATION :-COMPACT SUBSTATION-250KVA
272	Supplying, assembling, erecting, connecting, testing and commissioning of 11 KV Compact Secondary Sub Station outdoor type designed for natural cooling having type tested equipment comprising distribution transformers, SF6 insulated compact switchgear having metal enclosed robotically sealed/welded stainless steel tank ,low voltage switchboard, interconnection between HT switchgear & Transformer using single core cables and Transformer to LT switchgear using Al bus bars/Cables factory built / ready for connection type,other associated equipment etc including necessary foundation and earth work etc. without oil pits complete as required conforming to detailed specification laid down in the tender documents. The enclosure shall have modular construction using 2mm thick CRCA and 4 mm thick got dipped CRCA sheets for base and shall be painted with polyurethane paint from the exterior.The enclosure for LT switchgear & HT switchgear shall be provided with IP54 ingress protection. The transformer compartment will have IP34 ingress protection. Note- HT & LT Switchgear should be same make. The transformer used shall be specially designed for low losses (As per IS:-1180 level-01) and shall be hermetically sealed oil immersed & with corrugated tank, oil level indicator, hermetic protection realy, pressure relief device, gas filling valve, oil temprature indicator, multi function relay (DGPT Device) etc. as required Complete in all respect.The earthing shall be suitable for 18.3KA fault current.The varoius combinations of CSS shall be as per details below including necessary foundation and earth work etc
273	HT Switchgear Section :- 11KV 3 Way RMU( CCT2) type Compact switchgear unit having 2 No. Isolater load break switches and 1 No SF 6 circuit breaker enclosed in robotically laser welded non-extensible type stainless steel SF6 enclosure with Self powered relay (IDMTL O/C + E/F ) as HT switchgear as per the requirement detailed in the tender documents/SLD. Copper bus bars of 800 A capacity for HT 11 KV network. Transformer Section :- 11KV/415V,250KVA, hermetically sealed oil immersed Transformer suitable for CSS as per detailed specifications, with Automatic on load tap changer & RTCC .Remote tap changer circuit (RTCC) panel with all associated accessories as per schedules and specifications.Taps on HV for HV variation : +5 to - 15 % in the steps of 1.25 with AVR.
274	LV Switchgear Section:- LT section comprising the following & as shown in the drawing:- 400Amps 415V, 4P, 50Hz, 25KA MCCB with overload and short circuit Protection. . RELAYs, METERING INDICATOR & CT's :- On/Off Indication lamps with 6A control MCB as per fault requirement, R,Y,B phase Indication lamps with Control MCB as per fault requirement, One Set of 5 Nos. indication panel each with 6A control MCB as per fault requirement with MCCB, 1 No. off delay timer for manual operation, Phase Reversal relay, 8 Window annunciator all compartment. Heat shrinkable cable end terminal indoor type cable box 240/300/400 Sq. mm. Size complete all as required to connect incoming and outgoing HT cables to unitized Sub-Station and interconnection of network within the unitized Sub-Station with arc proof shoes.
275	Supplying of following size of Al conductor, XLPE insulated armoured and over all PVC sheathed, 11 KV (E) grade earthed cable as per technical specifications :- 3 core x 185Sq. mm
276	supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required.:- 185 Sq. mm
277	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. :- 200 mm dia (OD-200 mm & ID-175 mm nominal)
278	Supply & Laying of non skid Electro mat 1mtr wide and 2.5 mm thick 11KV grade IS 15652 as required including cutting to required length complete as per requirement of local electricity authorities.
279	Supply and fixing in position the approved “Shock Treatment Charts” written in English and Local Language. These charts shall be framed in teak wood frame and covered with glass.
280	Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
281	Supply and fixing position the approved single line diagram framed in 1000 x 100 mm size glass frame and installed in main LT Panel Room.
282	Supply of tool kit, first aid box with all accessories required for operation and maintainence for 415 volt & 11 kV equipment with 1 pair 11 kV rubber hand gloves of approved make.
283	Supply, installation, testing, and commissioning of an 11 kV indoor type metering panel, suitable for 3-phase, 50 Hz system, rated for 12kV voltage, comprising a metal-clad, compartmentalized, floor-mounted, dust and vermin-proof CRCA steel enclosure (minimum 2 mm thick) with IP4X protection, equipped with 630A rated tinned copper busbars (25 kA for 3 sec short circuit withstand), one set of 11 kV resin cast current transformers (CTs) with ratio 100/5A (or as required), accuracy class 0.5s for metering and 5P10 for protection, 15 VA burden, and one set of 11 kV potential transformers (PTs) with ratio 11 kV/110 V, accuracy class 0.5, 15 VA burden; including a static 3-phase 4-wire energy meter, class 0.2s accuracy, ABT/TOD type with RS-485/optical communication port as per state electricity borad specification, voltmeter and ammeter with selector switches, control fuses, MCBs, indicating lamps (R/Y/B/Trip), ON/OFF switches, protective relays (if required), complete internal wiring, earthing, cable glands and lugs for terminations, and all necessary accessories, tested as per IS 2705, IS 3156, IS 13779, IS 8623, and IEC standards, with type test certificates from NABL/CPRI accredited lab, complete in all respects as per utility specifications, with all site works, testing, and commissioning included.
284	DIESEL GENERATOR SETS:- Supply, installation, testing and commissioning of Prime Duty, Diesel engine driven generating Set (Silent Type) of 650KVA capacity CPCB-IV compliance to ISO-8528-Part 1 with Genset Controller (DIEF / DeepSea / Woodward or eq) and comprising of following:- The DG Set emission should be as per revised CPCB-IV norms as per the latest notification MOEFCC NOTIFICATION “GSR 804(E) DATED 03.11 .2022 [F.NO. Q-15017/05/2012-CPW
285	a) Diesel Engine :- Engine developing minimum 650kVA Gross Engine Power at 1500 RPM rated for Prime Duty with an additional 10% overload capacity for one hour in period of twelve hours of continuous operation at standard operation conditions as per ISO 3046-1/1, ISO 15550 inclusive of all standard accessories like Silencer, After Treatment System In Front of Radiator, High Pressure Common Rail (HPCR) Fuel Injection, ECU control providing efficient performance in terms of power & fuel consumption, Electronic Governing of G3 Governing Class and with all standard accessories as per ISO:8528-5.The various combination of DG shall be as per details below including necessary foundation and earth work etc.Engine Cooling System must be designed for 50⁰C ambient
286	b) Alternator:- Synchronous alternator 750KVA, AC 3 phase, 415 volt, 50 Hz, 1500 RPM, 0.8 lagging power factor alternator shall be in SPDP enclosure, self excited, self regulated, foot mounted with end shield. The alternator shall confirm to IS:13364/IEC 60034 – 1 suitable for tropical conditions.Alternator shall deliver full output at 50 degree C, shall have inbuilt BTD and winding temp. detector along with space heaters. Necessary spaace provision for REF protection with separate earth fault CTs shall be provided inside alternator box.
287	c) Automatic Main Failure Panel:- DG AMF control panel with internal access to facilitate both connection and maintenance complete with 1 No 1000Amps ACB WITH COPPER BUSBAR to loads. Ammeter, Voltmeter, frequency meter, Kh meter etc. including light Set ON/OFF battery charge etc. complete in all respect with power loom between alternator & isolator panel thru CU flexible within the Genset Canopy / Acoustic Enclosure. Engine mounted instrument panel fitted with and having digital/Analog display.
288	d) Acoustic Enclosure:- The enclosure fabricated from high grade cold rolled close annealed (CRCA) sheet and steel members lined with high density sound absorption material to reduce the sound level to 75 dBA from the original sound level measured at a distance of 1 meter away from the GenSet, under free field conditions compliance to CPCB- IV Noise limit / guidlines for Dg Set below 1000kVA / 800Kwe. Accoustic and weather proof enclosure suitable for the DG Set with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per CPCB-IV norms.The enclosure will be provided with durable industrial locking system with doors duly gas-keted etc., all complete with ARAI Type approval / certification.
289	e) Battery :- 2x12V, 150 Ah Battery assembly with all necessary connecting leads and terminals of reputed make and stand for lead acid Maintinance free battery. Starter Motor Power must be min 8KW
290	f) Base frame:- Skid mounting type base frame fabricated from suitable size of MS channel / CRCA Sheet providing common bed for engine & alternator directly coupled together with AVM Pads and necessary reinforcement which shall be installed on suitable RCC foundation and vibration isolation arrangement as per recommendations of manufacturer.
291	g) Testing in Works / Factory :- The DG sets will be tested in the works of the manufacturer for 12 hours at full load including 10% over load before dispatch in the presence of the representative of client . Testing will be crried out as per CPWD's specifications.
292	h) MISC :- Inbuilt Capacity Day tank of standard capacity . for fuel storage with level markings inside and outside canopy. After Treatment System In Front of Radiator with DEF (diesel exhaust fluid) / AdBlue storage tank of min 35L for urea dosing with proper connection etc.
293	Supply and Fixing of MS Exhaust Pipe of dia 1x250mm class 'B' for 650KVA DG Set with rain cap. With all accessories etc., complete
294	Supply and fixing of Thermal insulation on MS Exhaust Pipe of dia 250mm class 'B' for 650 KVA DG Set with 50mm thick LRB/Rock Wool of 96 Kg density per cub mtr. Covered with wire mesh & covered with 24 gauge AI Sheet
295	Supply, testing and commissioning of Aluminium cladding for residential silencers with LRB Rockwool 50mm Thick, density 64 Kg/cu.mtr., wire mesh and 24 gauge aluminium cladding. complete as required suitable for 500 Kva DG exhaust pipe temperature upto 450°C.
296	Supply and installation of SS Flexible Bellows, 8\\" dia. (250 mm NB), complete with counter flanges, heat resistant gaskets, nuts-bolts-washers etc., complete as required.
297	Providing & fixing for MS support structure for exhaust fume pipes from DG Sets (Exhaust pipe to be measured and paid for separately) along horizontal and vertical runs upto the height (as per CPCB norms) including cutting, welding etc and applying two coats of red oxide and two coats of synthetic enamelled paint of colour and shade as directed by client/Architect. The design of the support structure shall be done by the contractor and shall be as per CPCB norms approved , also to get the approval from the consultant before execution etc. as required.
298	Provide & fixing fuel piping with pipe supports, bends, flanges packing, hardware's and painting from main storage tank to day oil tank and day oil tank to DG Set of following sizes:- 25 mm dia Heavy duty (Class C ) MS Pipe
299	Supply & fixing the following valves of approved make complete with flanges, bolts nuts and gaskets etc., :- 25mm dia gate valve
300	Supply & fixing of 990 Litre (14 SWG thick) fuel oil service tank with oil level indicator with level gauge scale, inlet/outlet connection valve, air vent, pedestal for mounting etc., including 02 Nos if hand fuel transfer pumps
301	Obtaining necessary approvals from the chief electrical inspectorate, if required for electrical safety for 1X 650kVA Genset.
302	Supply, installation, testing and commissioning of Prime Duty, Diesel engine driven generating Set (Silent Type) of 250KVA capacity CPCB-IV compliance to ISO-8528-Part 1 with Genset Controller (DIEF / DeepSea / Woodward or eq) and comprising of following:-
303	The DG Set emission should be as per revised CPCB-IV norms as per the latest notification MOEFCC NOTIFICATION “GSR 804(E) DATED 03.11 .2022 [F.NO. Q-15017/05/2012-CPW
304	a) Diesel Engine :- Engine developing minimum 250kVA Gross Engine Power at 1500 RPM rated for Prime Duty with an additional 10% overload capacity for one hour in period of twelve hours of continuous operation at standard operation conditions as per ISO 3046-1/1, ISO 15550 inclusive of all standard accessories like Silencer, After Treatment System In Front of Radiator, High Pressure Common Rail (HPCR) Fuel Injection, ECU control providing efficient performance in terms of power & fuel consumption, Electronic Governing of G3 Governing Class and with all standard accessories as per ISO:8528-5.The varoius combinations of DG shall be as per details below including necessary foundation and earth work etc.Engine Cooling System must be designed for 50⁰C ambient
305	b) Alternator :- Synchronous alternator 250 KVA, AC 3 phase, 415 volt, 50 Hz, 1500 RPM, 0.8 lagging power factor alternator shall be in SPDP enclosure, self excited, self regulated, foot mounted with end shield. The alternator shall confirm to IS:13364/IEC 60034 – 1 suitable for tropical conditions.Alternator shall deliver full output at 50 degree C, shall have inbuilt BTD and winding temp. detector along with space heaters. Necessary spaace provision for REF protection with separate earth fault CTs shall be provided inside alternator box.
306	c) Automatic Main Failure Panel :_DG AMF control panel with internal access to facilitate both connection and maintenance complete with 1 No 400Amps MCCB WITH COPPER BUSBAR to loads. Ammeter, Voltmeter, frequency meter, Kh meter etc. including light Set ON/OFF battery charge etc. complete in all respect with power loom between alternator & isolator panel thru CU flexible within the Genset Canopy / Acoustic Enclosure.Engine mounted instrument panel fitted with and having digital/Analog display.
307	d) Acoustic Enclosure:- The enclosure fabricated from high grade cold rolled close annealed (CRCA) sheet and steel members lined with high density sound absorption material to reduce the sound level to 75 dBA from the original sound level measured at a distance of 1 meter away from the GenSet, under free field conditions compliance to CPCB- IV Noise limit / guidlines for Dg Set below 250kVA / 800Kwe. Accoustic and weather proof enclosure suitable for the DG Set with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per CPCB-IV norms.The enclosure will be provided with durable industrial locking system with doors duly gas-keted etc., all complete with ARAI Type approval / certification.
308	e) Battery:- 2x12V, 150 Ah Battery assembly with all necessary connecting leads and terminals of reputed make and stand for lead acid Maintinance free battery. Starter Motor Power must be min 8KW
309	f) Base frame:- Skid mounting type base frame fabricated from suitable size of MS channel / CRCA Sheet providing common bed for engine & alternator directly coupled together with AVM Pads and necessary reinforcement which shall be installed on suitable RCC foundation and vibration isolation arrangement as per recommendations of manufacturer.
310	g) Testing in Works / Factory :- The DG sets will be tested in the works of the manufacturer for 12 hours at full load including 10% over load before dispatch in the presence of the representative of client . Testing will be crried out as per CPWD's specifications.
311	h) MISC :- Inbuilt Capacity Day tank of standard capacity . for fuel storage with level markings inside and outside canopy. After Treatment System In Front of Radiator with DEF (diesel exhaust fluid) / AdBlue storage tank of min 35L for urea dosing with proper connection etc.
312	Supply and Fixing of MS Exhaust Pipe of dia 1x250mm class 'B' for 250 KVA DG Set with rain cap. With all accessories etc., complet
313	Supply and fixing of Thermal insulation on MS Exhaust Pipe of dia 250mm class 'B' for 250 KVA DG Set with 50mm thick LRB/Rock Wool of 96 Kg density per cub mtr. Covered with wire mesh & covered with 24 gauge AI Sheet
314	Supply, testing and commissioning of Aluminium cladding for residential silencers with LRB Rockwool 50mm Thick, density 64 Kg/cu.mtr., wire mesh and 24 gauge aluminium cladding. complete as required suitable for 250 Kva DG exhaust pipe temperature upto 450°C.
315	Supply and installation of SS Flexible Bellows, 8\\" dia. (250 mm NB), complete with counter flanges, heat resistant gaskets, nuts-bolts-washers etc., complete as required.
316	Providing & fixing for MS support structure for exhaust fume pipes from DG Sets (Exhaust pipe to be measured and paid for separately) along horizontal and vertical runs upto the height (as per CPCB norms) including cutting, welding etc and applying two coats of red oxide and two coats of synthetic enamelled paint of colour and shade as directed by client/Architect. The design of the support structure shall be done by the contractor and shall be as per CPCB norms approved , also to get the approval from the consultant before execution etc. as required.
317	Provide & fixing fuel piping with pipe supports, bends, flanges packing, hardware's and painting from main storage tank to day oil tank and day oil tank to DG Set of following sizes:- 25 mm dia Heavy duty (Class C ) MS Pipe
318	Supply & fixing the following valves of approved make complete with flanges, bolts nuts and gaskets etc., :- 25mm dia gate valve
319	Supply & fixing of 990 Litre (14 SWG thick) fuel oil service tank with oil level indicator with level gauge scale, inlet/outlet connection valve, air vent, pedestal for mounting etc., including 02 Nos if hand fuel transfer pumps
320	Obtaining necessary approvals from the chief electrical inspectorate, if required for electrical safety for 1X 250kVA Genset.
321	SITC of 40KVA 1Nos IGBT based UPS with Inbuilt Isolation Transformer work in Parallel Redundant Mode :- Input THD(i) shall be less than 5% in the entire loading range of 25% to 50%. UPS should have Intelligent Paralleling Mode feature and UPS to be supplied with Parallel Redundant Kit. Input power factor shall be more than 0.9. UPS shall carry design output at 35-40 deg. Shall have soft start and hold of for incoming supply. Invertor capacity to supply 105 % for 60 min; 125 % for 10 min; 150 % for 1 min; > 150 % for 200 ms. UPS should have Double conversion Efficiency up to 96.2% and ECO mode efficiency up to 99%. UPS should have Integrated maintenance bypass and Integrated input and output breakers/switches. Shall not allow deep discharge of the battery and shall not go below 10.5 volts in case of 12 volt cells.It shall have RS 485 port with modbus connectivity for BMS interfacing /SNMP Card and necessary protocols for LAN /WAN connectivity. All necessary software / mapping to be built in.UPS should be EN/IEC/AS 62040-1, EN/IEC/AS 62040-2, VFI-SS-111 classified. Single core 1.1 KV grade copper double sheathed unarmoured wires between UPS to battery via DC MCCB. Dimensions (W x D x H) 440 x 750 x 1600 mm
322	SITC of 40KVA 1 Nos Online UPS System with SMF Battery of 12Volt x 80Nos (480VDC) for an approx. 15Minutes Battery Backup & Work in a Parallel Redundant Mode. Input-3f/Output-3f with Inbuilt Isolation. Transformer. INPUT VOLTAGE 380/400/415VAC -10%+15%. OUTPUT VOLTAGE 380/400/415VAC ± 1% .UPS MAKE- Vertiv/ Emerson/ APC/ SOCOMEC
323	LT PANEL & DISTRIBUTION BOARD:- Supply,Installation, Testing and Commissioning of dust, damp and vermin proof IP- 4X / 5X free floor standing /wall mounted, Indoor type, form 3B/4A complied factory assembled in sheet steel enclosed modular construction, extendable from both side, fabricated out of CRCA grade d or equivalent sheet steel for load bearing member in 2mm thick and 1.6mm for non-load bearing members and doors with covers, 3mm thick for gland plates complete with 9 tank pre treatment process for powder coating with minimum 80 to 100 micron electro static powder coating coverage in approved shade of RAL 7032/7035 in elasto polymer type powder, complete with Aluminium bus bars designed for proper temperature rise withstand capacity, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage & current respectively, cable alleys, cable gland plates in two half for acb panels, etc. suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system necessary metering protections & indications and mounted with the following switch gears etc. complete as required complying with IEC-61439 Part1&2 .
324	(Each MCCB will have variable current setting for over current and short circuit, front extended lockable handle, pad lockable in off position, indication light for ON, shrouding on incomer side, termination shall be suitable for aluminium bus bars. All MCCBs shall be microprocessor based only otherwise as specified in the boq. All Switchboard. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The Busbars shall be fully insulated with heat shrinkable sleeves and should withstand busbar temp. The busbar support insulators should be SMC. Padlocking isolating switches and load break switches lock All kA ratings indicated shall be Ics = Icu = Icw values. Ics value should be 100%. GA drawings shall be got approved from Owners/Architects/ Consultants before fabrication. Tube based Clean Agent Fire suppression system shall be taken for all panels or as specified in the boq. All Panel should be Form 4b (For ACB Compartment) &3b combination.able in OFF position. The panel shall meet criterias as per Client EHS guideline.s shall have provision for entry of cables from the top or bottom as required
325	MAIN L.T PANEL Ics = 25KA. / Incomers :- 3 Numbers (2 x 400A, 4P MCCB+Contactor from CSS + 1 x 400A, 4P MCCB+Contactor From DG.
326	Incomer from CSS of 250 kVA:- 2 Nos. 400A, 4P MCCBwith microprocessor based communicable release, over current with different time settings, short circuit with time delay & earth fault release with time delay, instantaneous current setting . Suitable links shall be provided for cable termination. ON/OFF/TRIP indication shall be wired through potential free contact up to terminal strip of breaker for hooking to BMS. Each incomer shall have following. 2 nos 400A TP,Cont with ON/ OFF indication lamp,ON/ OFF /TRIP,A/M Switch,Start/Stop push button complete with all accessories as reuired./ 1 no. 0-500V 96 sqmm digital voltmeter with selector switch, 3 No. phase indicating lamps to show the incoming power with control 2A TP MCB./ 1 No. Phase reversel power relay with matching cast resin CTs./ 1 no. 3 phase voltage monitoring relay cum phase sequence meter./ 1 No. APFC relay with matching cast resin CT's.
327	Incomer from DGs:- 1No.400A, 4P MCCB+Contactor with microprocessor based communicable release, over current with different time settings, short circuit with time delay & earth fault release with time delay, instantaneous current setting . Suitable links shall be provided for cable termination. ON/OFF/TRIP indication shall be wired through potential free contact up to terminal strip of breaker for hooking to BMS. Each incomer shall have following. / 1 no 400A TP,Cont with ON/ OFF indication lamp,ON/ OFF /TRIP,A/M Switch,Start/Stop push button complete with all accessories as reuired./ This release shall have RS-485 including showing all parameters on the software before integrating to IBMS . / 1 no. 0-500V 96 sqmm digital voltmeter with selector switch, 3 No. phase indicating lamps to show the incoming power with control 2A TP MCB./ 3 Nos. indicating lights for ACB on/ off/ trip position./ 1 No. ON/OFF push buttons. / 1 No. reverse phase relay with matching cast resin CTs. / 1 no. 3 phase voltage monitoring relay cum phase sequence meter
328	Bus Couplers:- One number 400A, 4P MCCB microprocessor based over current, short circuit release type as bus coupler. Necessary contacts shall be wired upto terminal strip for breaker ON/OFF/TRIP, providing potential free contact ON/OFF/TRIP for status monitoring in BMS. 1 no 400A TP,Cont with ON/ OFF indication lamp,ON/ OFF /TRIP,A/M Switch,Start/Stop push button complete with all accessories as reuired.
329	Bus Bar Section-I & II:- Two set of TPN Aluminium bus bar rated for 500A (after considering all necessary deratings) 3 phase 4wire, 50Hz. A minimum derating factor of 0.80 must be taken for calculation of bus bar sizes. The bus bar size after derating shall be equal to the ampere given in the BOQ. current density of bus-bars shall not be more than 0.8 Amps/sq.mm for Aluminium and earth bus size shall be suitable of system fault level.
330	Outgoings Sections:- 5 Nos. 250A 4P feeder each having one no. 250A 4P MCCB./ 1 No. 200A 4P feeder having one no. 200A 4P MCCB./ 8 Nos. 63A 4P feeder each having one no. 63A 4P MCCB. Other items such as.
331	PLC FOR INTERLOCKING:- PLC based Necessary electrical Interlocking through advance contacts / contactors in MCCB/ ACB's (Incomers & Bus couplers) should be provided to ensure that only one supply is available at a time on each section of bus and to eliminate any possibility of accidentally approaching two supplies at one bus section as per single line diagram enclosed & as required./ PLC based auto and manual operation and Load Manager for both Mains and DG power, whose function will be to determine the Load. Supplier to submit the Bill of materials for the above functions also provide motorised potential meter for each generator for voltage correction./ 1kVA online UPS with minimum 15 minutes backup built in battery for PLC system./ 1 Lot of control wiring. / 1 Set of designation plates./ Tube based Clean Agent Fire suppression system shall be taken for panels.
332	MAIN L.T PANEL as describe above and shown in SLD.
333	BUILDING PANEL Ics = 25KA:- Incomer:-
334	2 Nos. Incomer 250Amps 4P MCCB thermal magnetic releases for O/C, S/C, 3 Nos. phase indicating lamps to show the incoming power with control 2A TP MCB,and 1 no. digital multifunction meter with matching cast resin CT's. / Bus Bar:- One set of TPN, AL. bus bar rated 500Amps (after considering necessary deratings of 80%) for phases and neutral for half capacity of phases.
335	The outgoing feeders are as follows :- 1 No. 160A 4P feeder having one no. 160A 4P MCCB. / 2 Nos.125A 4P feeder each having one no. 125A 4P MCCB. / 3 Nos.63A 4P feeder each having one no. 63A 4P MCB. / 2 Nos.40A 4P feeder each having one no. 40A 4P MCB. / 1 No.40A DP feeder having one no. 40A DP MCB. 2 Nos. of 5 A rating of TP MCCB of 50 kA breaking capacity with 1 HP DOL motor starter type ii co-ordination along with TP power contactors (AC3) with inbuilt 2NO + 2NC contact with necessary additional potantial free auxiliary contactor oprate starter ON/OFF and remote switching, Red, Green & Yellow Indicating Lamps, Start/Stop Push buttons LED type, Auto/Manual/Off selector switch Complete as required. (For Domestic Transfer Pump -1working&1 standby). Tube based Clean Agent Fire suppression system shall be taken for panels. 1 set of complete wiring.
336	BUILDING PANEL Ics = 25KA as describe above and shown in SLD.
337	HVAC PANEL AT TERRACE (OUTDOOR TYPE-IP-55) Ics = 25KA, Incomer :- 1 No. Incomer 160Amps 4P MCCB with microprocessor based releases for O/C, S/C, 3 Nos. phase indicating lamps to show the incoming power with control 2A TP MCB,and 1 no. digital multifunction meter with matching cast resin CT's.
338	Bus Bar :- One set of TPN, AL. bus bar rated 200Amps (after considering necessary deratings of 80%) for phases and neutral for half capacity of phases. The outgoing feeders are as follows :- 3 No. 63Amps 4P feeders each having one number 63 amps 4P MCB + 63 amp 4P ELCB (300 mA)./ 2 Nos. 63Amps 4P feeders each having one number 63 Amps 4P MCB. 1 set of complete wiring
339	HVAC PANEL AT TERRACE (OUTDOOR TYPE) Ics = 25KA as describe above and shown in SLD.
340	PLUMBING PANEL Ics = 25KA, Incomer :- 1 No. Incomer 63Amps 4P MCCB with microprocessor based releases for O/C, S/C, 3 Nos. phase indicating lamps to show the incoming power with control 2A TP MCB,and 1 no. digital multifunction meter with matching cast resin CT's.
341	Bus Bar :- One set of TPN, AL. bus bar rated 200Amps (after considering necessary deratings of 80%) for phases and neutral for half capacity of phases. The outgoing feeders are as follows :- 3 No. 63Amps 4P feeders each having one number 63 amps 4P MCB
342	The outgoing feeders are as follows ::- 2 Nos. of 2.5 amp rating of TP MCCB of 50 kA breaking capacity with 1 HP DOL motor starter type ii co-ordination along with TP power contactors (AC3) with inbuilt 2NO + 2NC contact with necessary additional potantial free auxiliary contactor oprate starter ON/OFF and remote switching, Red, Green & Yellow Indicating Lamps, Start/Stop Push buttons LED type, Auto/Manual/Off selector switch Complete as required. (For Flusing Transfer Pump -1working&1 standby).
343	2 Nos. of 2.5 amp rating of TP MCCB of 50 kA breaking capacity with 1 HP DOL motor starter type ii co-ordination along with TP power contactors (AC3) with inbuilt 2NO + 2NC contact with necessary additional potantial free auxiliary contactor oprate starter ON/OFF and remote switching, Red, Green & Yellow Indicating Lamps, Start/Stop Push buttons LED type, Auto/Manual/Off selector switch Complete as required. (For Booster Domestic Transfer Pump -1working&1 standby).
344	2 Nos. of 2.5 amp rating of TP MCCB of 50 kA breaking capacity with 1 HP DOL motor starter type ii co-ordination along with TP power contactors (AC3) with inbuilt 2NO + 2NC contact with necessary additional potantial free auxiliary contactor oprate starter ON/OFF and remote switching, Red, Green & Yellow Indicating Lamps, Start/Stop Push buttons LED type, Auto/Manual/Off selector switch Complete as required. (For Booster Flusing Pump -1working&1 standby).
345	2Nos. of 7.5 amp rating of TP MCCB of 50 kA breaking capacity with 2 HP DOL motor starter type ii co-ordination along with TP power contactors (AC3) with inbuilt 2NO + 2NC contact with necessary additional potantial free auxiliary contactor oprate starter ON/OFF and remote switching, Red, Green & Yellow Indicating Lamps, Start/Stop Push buttons LED type, Auto/Manual/Off selector switch Complete as required.(For Flusing Booster Pump -1working&1 standby).
346	2 No. of 2.5 amp rating of TP MCCB of 50 kA breaking capacity with1 HP DOL motor starter type ii co-ordination along with TP power contactors (AC3) with inbuilt 2NO + 2NC contact with necessary additional potantial free auxiliary contactor oprate starter ON/OFF and remote switching, Red, Green & Yellow Indicating Lamps, Start/Stop Push buttons LED type, Auto/Manual/Off selector switch Complete as required.(Spare). WITH 1 set of complete wiring
347	PLUMBING PANEL Ics = 25KA Ics = 35KA as describe above and shown in SLD.
348	UPS INPUT/OUTPUT PANEL Ics = 25KA :-Supply,Installation, Testing and Commissioning of dust, damp and vermin proof IP- 4X free floor standing /wall mounted, Indoor type, form 3B/4A complied factory assembled in sheet steel enclosed modular construction, extendable from both side, fabricated out of CRCA grade d or equivalent sheet steel for load bearing member in 2mm thick and 1.6mm for non-load bearing members and doors with covers, 3mm thick for gland plates complete with 9 tank pre treatment process for powder coating with minimum 80 to 100 micron electro static powder coating coverage in approved shade of RAL 7032/7035 in elasto polymer type powder, complete with Aluminium bus bars designed for proper temperature rise withstand capacity, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage & current respectively, cable alleys, cable gland plates in two half for acb panels, etc. suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system necessary metering protections & indications and mounted with the following switch gears etc. complete as required complying with IEC-61439 Part1&2 .
349	UPS INPUT PANEL Ics =25KA :- 1 No. Incomer 125Amps 4P MCCB with TM releases for O/C, S/C, 3 Nos. phase indicating lamps to show the incoming power with control 2A TP MCB,and 1 no. digital multifunction meter with matching cast resin CT's. One set of 4P, Al. bus bar rated 200Amps (after considering necessary deratings of 80%) for phases and neutral for half capacity of phases. The outgoing feeders are as follows :- 2Nos. 100Amps 4P feeders each having one number 100Amps 4P MCCB. (WITH 1 set of complete wiring )
350	UPS INPUT PANEL Ics = 25KA Ics = 25KA as describe above and shown in SLD.
351	UPS OUTPUT PANEL Ics = 25KA . 2 Nos. Incomer 100Amps TP+2N MCCB with TM releases for O/C, S/C, 3 Nos. phase indicating lamps to show the incoming power with control 2A TP MCB,and 1 no. digital multifunction meter with matching cast resin CT's.1 no Voltmeter with voltage selector switch and 1no Ammeter with ammeter selectro switch. One set of TP+2N, Al. bus bar rated 200Amps (after considering necessary deratings of 80%) for phases and neutral for half capacity of phases.
352	The outgoing feeders are as follows :- 2Nos. 63Amps 4P feeders each having one number 63Amps 4P MCB./ 1No. 63Amps DP feeders having one number 63Amps DP MCB./ 3Nos 40Amps DP feeders having one number 40Amps DP, MCB. 1 set of complete wiring
353	UPS OUTPUT Ics = 25KA Ics = 25KA as describe above and shown in SLD.
354	75 KVAR Capacitor Panel Ics = 25KA:- 75 KVAR CAPACITOR PANELS (2X25KVAR + 2X10KVAR+ 1X5KVAR)
355	Supplying, installation, testing & commissioning of factory built floor mounted auto-manual power factor correction system panel of 75KVAR capacity having 3 phase, Mixed Die Electric(total power loss not exceeding 0.50 W/ KVAR) power capacitor in eleven steps, filled with suitable oil and; provided with 5KVAR fixed capacity and balance Electronic Thyristor switching & detuned filters (min.7%) to supress switching of inrush current and reducing harmonics to improve capcitor life. The system Shall be provided with required capacity master MCCB, to control its main operating parameters such as over loads, short circuit, etc.
356	The panel shall be fabricated in compartmentalized design from CRCA sheet steel of 2mm thick for frame work and covers, having 300 Amp capacity extensible type TPN Aluminium Alloy bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 35 MVA for I Sec., bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common GI earth bar of size 75 mm x 10 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears/ accessories with required size of Al. bus bars and control wiring with 2.5 sq.mm. PVC insulated FRLS copper conductor Single Core cable, of 2 mm thick MS Sheet, provided with exhaust fans (with thermostat) and grills for proper ventilation, interconnections with suitable size conductor cables & lugs and accommodating the following swicthgears & accessories: 250Amp 3 Pole MCCB- 1 No. / LED Indicating light - 6 Nos.
357	One numbers dual source, dual setting, binary type automatic power factor sensing and correction relay (12 stages) complete with its all accessories etc. as required. MCCB of following capacity with spreader link and phase barrier. / 63 A, 3P,MCCB - 2 Nos. / 32 A, 3P,MCCB - 3 Nos./ L.T. Power factor improving capacitor of indoor type suitable for operation on 415 volts AC 3 phase 50 Hz complete with banking arrangement, interconnections with suitable size of copper conductor PVC insulated PVC sheathed unarmoured cable, discharge resistance etc. as required.
358	L.T. Power factor improving capacitor of indoor type suitable for operation on 415 volts AC 3 phase 50 Hz complete with banking arrangement, interconnections with suitable size of copper conductor PVC insulated PVC sheathed unarmoured cable, discharge resistance etc. as required. / Bank of 25 KVAr rating - 2 Set. / Bank of 10 KVAr rating - 2 Set / Bank of 5 KVAr rating - 1 Set (FIXED TYPE). / Bank of 5 KVAr rating - 1 Set
359	APFC Panel as described above and shown in SLD
360	Design, Manufacture, Supplying, loading & unloading assembling at site, installation, fixing on the position, testing & commissioning of the following cubical type, dead front, 2.5mm thick sheet steel enclosed, 400Amp, 4P, MCCB-25kA, in 2.5 MM Thick sheet metal enclosed Out door to be located near D.G Set, including emergency push bottom with key lock and provide 5 Nos indicating lamps for status indication \\"ON\\",\\"OFF\\" , tripped due to fault, DC supply healthy and spring charged complete as required. confirm to degree of protectio IP:55. Also provide M.S. Stand made height 600mm. Maximim height of panel should not be more then 20mtr.
361	Supply,unloading at site of following Outdoor type feeder pillar double door lockable type with epoxy paint. This panel shall be mounting on MS/brick pedestal support upto 400mm high from ground level,cubical, dust, vermin proof and outdoor type (IP65) fabricated as per specification laid in document with following incomming and outgoing feeders including making connections/inter-connections testing and earthing etc. required.
362	Feeder Pillar-01(Outdoor Type - IP 65) Ics=25 KA (FOR EXTERNAL LIGHTING) :- Incomer:- 1 No. Incomer 63Amps 4P, MCCB with microprocessor based O/C, S/C protections having 3 Nos. phase indicating lamps to show the incoming power control with MCB & 1 no. digital voltmeter with separate selector switch, 1 no. ON/OFF indication. / 63A TP,Cont with ON/ OFF indication lamp,ON/ OFF /TRIP,A/M Switch,Start/Stop push button and along with synchronizing 24 hours timer in auto mode.
363	Bus Bar :A set of TPN, Cu. bus bar rated 150 Amps (after considering necessary deratings of minimum 0.80) for phases and neutral for half capacity of phases. The outgoing feeders as follow:- 3 Nos.16A 4P outgoing feeder each having 1 no. 16A 4P MCB & 4P MCB./ 3 Nos.16A DP outgoing feeder each having 1 no. 16A DP MCB & 4P MCB. / 3 Nos. 32A DP outgoing feeder each having 1 no. 32A DP MCB. (connected Before Timer and contector). / 1 set of complete wiring.
364	External Lighting Panel as described above and shown in SLD
365	Supply & laying of PVC insulated PVC sheathed armoured / unarmored aluminium/copper conductor cable directly in ground. The laying involves digging, making sand cushion cover on top and bottom of cable, providing brick support and filling with excavated earth for following sizes.
366	4c x 16 sqmm Al. Arm xlpe cable
367	3c x 4 sqmm cu. Arm xlpe cable
368	3c x 2.5 sqmm cu. Arm xlpe cable
369	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
370	4c x 16sqmm Al. Arm xlpe cable
371	3c x 4 sqmm cu. Arm xlpe cable
372	3c x 2.5 sqmm cu. Arm xlpe cable
373	Street Light Poles / LIGHTNING CONDUCTOR / Earthing
374	Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.
375	Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA
376	Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect.
377	Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
378	Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
379	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
380	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
381	Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
382	Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
383	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
384	Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.
385	Supply and burying of 600mm x 600mm x 6mm G.I.plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc.as per directions of Engineer-in-charge complete in all respect.
386	Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no. 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc.complete in all respect.
387	Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect.
388	Supply and laying of 25mm x 5mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
389	Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
390	Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
391	Providing and fixing earth bus of 50 mm X 5 mm G.I strip on surface for connections etc. as required.
392	SINGLE CORE COPPER FLEXIBLE CABLE EARTHING:- Supply, laying, connection, testing and commissioning of following sizes of 1.1kV grade Single core FRLS PVC insulated Single core sheathed Cable confirming to IS:1554 with Bright annealed copper conductor for 1.1kV voltage grade. It should include both ends terminal joints providing tinned copper terminal lugs, single compression PVC cable glands up to 16 sqmm cable and double compression PVC cable glands for above, insulation tape, effecting terminal connections to the equipment complete as required.
393	1c x 35 sqmm Cu. sheathed FRLS cable
394	1c x 16 sqmm Cu. sheathed FRLS cable
395	1c x 6 sqmm Cu. sheathed FRLS cable
396	SUBHEAD-X-MV CABLE SUPPLY, LAYING AND TERMINATION
397	Supply of the following 1100 volts grade, Aluminium/Copper conductor, XLPE insulated, PVC sheathed, steel armoured/Unarmoured cables as per IS 7098 Part-1 and as per technical specifications of this tender and directions of Engineer-in-Charge.
398	4 CORE X 16 sq.mm. Al Ar. XLPE cable
399	4 CORE X 25 sq.mm. Al Ar. XLPE cable
400	3.5 Cores X 35 sq.mm. Al Ar. XLPE cable
401	3.5 Cores X 50 sq.mm. Al Ar. XLPE cable
402	3.5 Cores X 70 sq.mm. Al Ar. XLPE cable
403	3.5 Cores X 150 sq.mm. Al Ar. XLPE cable
404	3.5 Cores X 240 sq.mm. Al Ar. XLPE cable
405	3.5 Cores X 300 sq.mm. Al Ar. XLPE cable
406	3 Core X 6 sq.mm. Cu. PVC Ar. cable
407	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
408	Upto 35 sq. mm
409	Above 185 sq. mm and upto 400 sq. mm
410	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
411	Upto 35 sq. mm (clamped with 1mm thick saddle)
412	Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
413	Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
414	Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
415	MV CABLE JOINTING & END TERMINATION
416	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required :- 3½ X 35 sq. mm (32mm)
417	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required :- 3½ X 50 sq. mm (35mm)
418	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required :- 3½ X 150 sq. mm (50mm)
419	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required :- 3½ X 240 sq. mm (57mm)
420	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required :- 3½ X 300 sq. mm (70mm)
421	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required :- 4 X 16 sq. mm (28mm)
422	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required :- 4 X 25 sq. mm (28mm)
423	Supplying and making end termination with brass compression gland and Cu lugs for following size of PVC insulated and PVC sheathed / XLPE cu conductor cable of 1.1 KV grade as required. :- 6 sq.mm. Cu. PVC Ar. cable
424	Supply, Unloading, shifting, Storing, Laying, Fixing, Testing, Commissioning & Single compression heavy duty glands of following sizes of Control Cables, Solid Copper conductor single stranded conductor, XLPE Insulated, cores laid up, PVC tape / Extruded Inner sheathed , Glavanised round wire Armour, extruded PVC Type, 650V grade on existing cable trays/ in existing hume pipes/ PVC pipes/ GI pipes/ on surface of slabs, walls or masonary/ RCC trenches/ ducts including cables ties, GI saddles, clamps and necessary hard ware. :- 6 core x 2.5 sq. mm cable
425	Supply, Unloading, shifting, Storing, Laying, Fixing, Testing, Commissioning & Single compression heavy duty glands of following sizes of Control Cables, Solid Copper conductor single stranded conductor, XLPE Insulated, cores laid up, PVC tape / Extruded Inner sheathed , Glavanised round wire Armour, extruded PVC Type, 650V grade on existing cable trays/ in existing hume pipes/ PVC pipes/ GI pipes/ on surface of slabs, walls or masonary/ RCC trenches/ ducts including cables ties, GI saddles, clamps and necessary hard ware. :- 10 core x 2.5 sq. mm cable
426	Supply, Unloading, shifting, Storing, Laying, Fixing, Testing, Commissioning & Single compression heavy duty glands of following sizes of Control Cables, Solid Copper conductor single stranded conductor, XLPE Insulated, cores laid up, PVC tape / Extruded Inner sheathed , Glavanised round wire Armour, extruded PVC Type, 650V grade on existing cable trays/ in existing hume pipes/ PVC pipes/ GI pipes/ on surface of slabs, walls or masonary/ RCC trenches/ ducts including cables ties, GI saddles, clamps and necessary hard ware. :- 24 core x 2.5 sq. mm cable
427	GAS SUPPRESSION SYSTEM FOR PANELS
428	Supply, Installation,testing & commisioning of 1 Kg capacity FK-5-1-12 with UL approved 1.6 ltr water capacity non ferrous Seamless Cylinder(PESO & UL Approved) with a test pressure of 53 bar and maximum working pressure of 35bar, DLP Assembly with safety relief disc and isolation valve & UL Approved Pressure Gauge , push in connector for tube, UL approved 1kg FK-5-1-12 Gas ref NFPA 2001 FK-5-1-12 , mounting bracket, End of Line adopter with weight measuring unit to indicate loss in weight in MCU & low pressure switch((UL Approved)) to indicate loss in presure in MCU, both to be used for monitoring system activation or loss of agent. Make - SVS Firetrex, Reacton, Ceasefire.
429	Supply, Installation,testing & commisioning of 2 Kg capacity FK-5-1-12 with UL approved 2.7 ltr water capacity non ferrous Seamless Cylinder(PESO & UL Approved) with a test pressure of 53 bar and maximum working pressure of 35bar, DLP Assembly with safety relief disc and isolation valve & UL Approved Pressure Gauge , push in connector for tube, UL approved 2kg FK-5-1-12 Gas ref NFPA 2001 FK-5-1-12 , mounting bracket, End of Line adopter with weight measuring unit to indicate loss in weight in MCU & low pressure switch(UL Approved) to indicate loss in presure in MCU, both to be used for monitoring system activation or loss of agent. Make - SVS Firetrex, Reacton, Ceasefire
430	Supply, Installation,testing & commisioning of 4 Kg capacity FK-5-1-12 with UL approved 4.5 ltr water capacity non ferrous Seamless Cylinder(PESO & UL Approved) with a test pressure of 53 bar and maximum working pressure of 35bar, DLP Assembly with safety relief disc and isolation valve & UL Approved Pressure Gauge , push in connector for tube, UL approved 4kg FK-5-1-12 Gas ref NFPA 2001 FK-5-1-12 , mounting bracket, End of Line adopter with weight measuring unit to indicate loss in weight in MCU & low pressure(UL Approved) switch to indicate loss in presure in MCU, both to be used for monitoring system activation or loss of agent. Make - SVS Firetrex, Reacton, Ceasefire
431	Supply, Installation,testing & commisioning of Linear pneumatic heat Detection Tube :- UL Aproved Heat detection Tube, 4mm ID, 6mm OD, detection temprature 160 Deg celcius, mutlilayer, Water Absorbtion ≤ 1.5% @ 20oC and 50% RH as tested per ISO62 with fittings and supports. SVS Firetrex, reacton, Ceasefire
432	SITC of Master Control Unit for controlling each system along consisting Battery back for 24 hours at standyby mode with atleast 1000 eventlog , complete with pressure switches, buzzers and electronic hooters, including all necessary accessories + electrical wiring to make each entire system functional. Make - SVS Firetrex, Honeywell, Ceasefire, Seimens. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrical Maintenance Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Internal Electrical & Elv, Hvac, Bms, Fire Fighting System & External Electrification & Pumps Accessories For Csf-06 (Bio Material Facilities) In Plot No. F-14, Sector-28, Yeida., Gautam Buddha Nagar-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Internal Electrical & Elv, Hvac, Bms, Fire Fighting System & External Electrification & Pumps Accessories For Csf-06 (Bio Material Facilities) In Plot No. F-14, Sector-28, Yeida., Gautam Buddha Nagar-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us