|
| 1 | WIRING |
| 2 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 3 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 4 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 5 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 6 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 7 | 3 x 2.5 sq. mm |
| 8 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 9 | 20 mm |
| 10 | 25 mm |
| 11 | 32 mm |
| 12 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 13 | 15/16 A switch |
| 14 | 15/16A modular socket Three module |
| 15 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 16 | 4 Module (125mmX75mm) |
| 17 | DLP PVC Trunking |
| 18 | Supplying and fixing of DLP Plastic trunking of size 150 x 50 mm with clip on partitions (2 compartments), 2 Nos of 65 mm or nearest suitable width flexible cover including all accesories(joints , internal and external angles, endcaps , junctions etc.as per site condition) , fitted on the wall/floor with steel screws, cup washers etc. as required. |
| 19 | Supplying and fixing following modular switch/socket on existing modular plate, including connections etc. as required on the existing DLP trunking. |
| 20 | 5/6 A switch |
| 21 | 5/6 A socket outlet |
| 22 | Supplying and fixing following modular frame, including connections etc. as required on the existing DLP trunking. |
| 23 | 6 Module |
| 24 | MCCB, MCB & DB'S |
| 25 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)The contractor shall also label the DB cover according to the instruction of Engineer in charge. |
| 26 | 8 way (4 + 24), Double door |
| 27 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 28 | Single pole |
| 29 | Triple pole |
| 30 | Four Pole |
| 31 | Supplying and fixing the following rating, 415 V, 10 kA, 'C' curve miniature circuit breaker suitable for inductive load of Triple pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required. |
| 32 | Supplying and fixing the following rating rating, 415 V, 10kA, 'C' curve miniature circuit breaker suitable for inductive load of Four Pole in the existing MCB DB, complete with connections, testing and commissioning etc. as required. |
| 33 | MISC. Items |
| 34 | Removing of switch board of any size including wires, switches(modular/piano type) switch board, clamps, GI/plastic box etc, and making good any damages to the wall/floor by covering with a hylam sheet or by restoration and painting and, handling all accessories carefully without damage, and conveying the materials to the godown,including transportation along with loading and unloading of materials, complete as required and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
