Tender For Work Of Labor Charges For Cutting, Threading, Welding And Other Fabrication Works Under Uwss Thanagazi In Subdivision Thanagazi In Jurisdiction Rural Div. Ii Alwar (Ncr), Thanagazi-Rajasthan
TDR : 55189825
Tender Notice
BOQ
7 Days Left
Thanagazi
Rajasthan
Tender For Work Of Labor Charges For Cutting, Threading, Welding And Other Fabrication Works Under Uwss Thanagazi In Subdivision Thanagazi In Jurisdiction Rural Div. Ii Alwar (Ncr)
Name of Work:- Work of labor charges for cutting, threading, welding and other fabrication works under UWSS Thanagazi in Subdivision Thanagazi in Jurisdiction Rural Div. II Alwar (NCR)
Sl. No.
Item Description
1
Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern's store own his cost.
2
80 mm dia
3
100 mm dia
4
125 mm dia
5
150 mm dia
6
200 mm dia
7
Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concern's store own his cost.
8
32 mm
9
50 mm
10
65 mm
11
80 mm
12
Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department.
13
32 mm
14
50 mm
15
Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job.
16
At Workshop
17
. On Site
18
Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect.
19
Supplying of MS Rods for different sizes of sluice valve and should be supplied as according to size of old rods including material and finishing for the following sizes.
20
Sluice Valve Size 80mm
21
Sluice Valve Size 100mm
22
Sluice Valve Size 125mm
23
Sluice Valve Size 150mm
24
Sluice Valve Size 200mm
25
Supplying of Chuck Nut for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes.
26
Sluice Valve Size 80mm
27
Sluice Valve Size 100mm
28
Sluice Valve Size 125mm
29
Sluice Valve Size 150mm
30
Sluice Valve Size 200mm
31
Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate including material for the following sizes.
32
Sluice Valve Size 80mm
33
Sluice Valve Size 100mm
34
Sluice Valve Size 125mm
35
Sluice Valve Size 150mm
36
Sluice Valve Size 200mm
37
Making Reducer Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia. in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller pipe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm).
38
2x2 ½ “ dia size (50 x 65 mm)
39
2 ½ “x 3” dia size (65 x 80 mm)
40
2”x 3” dia size (50 x 80 mm)
41
3”x 4” dia size (80 x 100 mm) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
