|
| 1 | Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters without taking off shutters from the frame complete all as specified and directed |
| 3 | Supply & fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed. |
| 4 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 5 | S&F Steel windows box type using 'P' section comprising double frame for gauge and glazed skelton shutter jointly with flat iron 40x3mm complete including hinges, handle, tower bolts, stops, lugs etc all as shown on drawing.Note (i) For the perpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongreries shown on drgs (iii) gaurd bars glazing & Wire mesh shall be measured and paid for separately complete all as specified and directed. |
| 6 | S&F Steel ventilator with top hung shutter, including hinges, steel peg stay, complete all as specified and directed. |
| 7 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frames/ chowkats; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe-410 or Fe-310 complete all as specified and directed. |
| 8 | S&f 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 9 | S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed. |
| 10 | S&F 3 mm thick, plain sheet glass ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. m in each pane complete all as specified and directed. |
| 11 | S&F Aluminium handles 125mm size, cast type, anodised incl necessary screws complete all as specified and directed. |
| 12 | S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section incl necessary screws complete all as specified and directed. |
| 13 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 14 | S/F in 25 mm bore drapery curtain rods poweder coated finished as directed with fancy type incl fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 15 | M&L for providing cement concrete 1:3:6 Type C-1 (using 20 mm graded crushed stone aggregates) in cills, copings, kneelers, bed plates, kerbs hold fast, fillings in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed. |
| 16 | Demolition of cement concrete of ground floors n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified and directed. |
| 17 | M&L 75 mm thick PCC 1:3:6 type C2 (40 mm graded stone aggs) as in plinth protection, path etc finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 18 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed. |
| 19 | S&F for 4mm thick E-board in ceiling including powder coated GI frame work (snap grid) suitable for size as in false ceiling of size 605mmx605mm consisting of followings and all as directed:-i) powder coated sections incorporated in frame work shall conform to relevent IS Code ii) The snap grid shall consist of powder coated main/ cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with and including supporting hangers consisting of 2mm to 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with powder coated angle bracket, of size 15mmx15mmx1.5mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with powder coated angle of size 25mmx25mmx1.4 m thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of powder coated shall be 50 micron complete all as specified and directed. |
| 20 | Dismantling of Asbestos cement / Fiber (corrugated,semicorrugated, etc.) sheet any description as in roof covering incl ridge and removing from site complete all as specified and directed. |
| 21 | M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws complete all as specified and directed |
| 22 | S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed |
| 23 | S&F MS flate iron as in wind ties for roof cutting tops to shape as directed, drilling holes flat iron fillets including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed |
| 24 | Supply & fix in repair second class hardwood (SAL) as in wooden scantling, rafter, purlins and like truss work etc framed together with glue pinned at joints, with single or double rebates or as in purlins, rafters etc complete all as specified and directed. |
| 25 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed. |
| 26 | M&L for brick work with old size subclass B bricks, straight or curved on plan exc 6m mean radius , built in CM 1:6 complete all as specified and directed. |
| 27 | All as per item No 26.00 here-in-befor except bricks |
| 28 | Taking down cement plaster of any description from brick or stone wall including raking out joints, hacking out for key, scrubbing down with water etc complete all as specified and directed |
| 29 | M & L for applying 15 mm thick rendering in CM 1:6 on brick / concrete surfaces of walls finished even and smooth without using extra cement, complete all as specified and directed : |
| 30 | M & L for applying 15 mm thick rendering in CM 1:4 on brick / concrete surfaces of external walls finished even and smooth without using extra cement using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid sepratly |
| 31 | Supply only integral water proofing compound |
| 32 | M & L for Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer with 1 mm wall care putty complete all as specified and as directed. |
| 33 | M & L for Preparing old surface of walls/ existing treatment by complete removal of existing treatment by mecahnical means and two coat of oil bond distember over a coat of primer over 1mm thick layer of putty complete all as specified and directed. |
| 34 | Material & Labour of preparing new surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with 1mm wall care putty over new prepared surfaces complete all as specified and directed |
| 35 | Material & Labour of preparing old surface of wall/existing treatment by complete removal of existing and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with 1mm wall care putty over old prepared surfaces complete all as specified and directed |
| 36 | Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 37 | Material & labour for preparation of new steel & iron surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed . |
| 38 | S&F in Floor 140mm over all length with flap door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 39 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed. |
| 40 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed. |
| 41 | M&L ceramic coloured tiles of size 600x600x7- 8mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed. |
| 42 | M&L ceramic coloured tiles of size 600x600x7-8mm thick, coloured (cut to required size) set and jointed in neat cement slurry and pointed with white or coloured cement as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
