|
| 1 | Removal of blockage/chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/ chock remover and making the continuous flow between two manholes for 100mm bore of pipe complete all as specified and directed. Note : The clear distance between two manholes shall be measured. |
| 2 | Removal of blockage/chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/ chock remover and making the continuous flow between two manholes for 150mm bore of pipe complete all as specified and directed. Note : The clear distance between two manholes shall be measured. |
| 3 | Removal of blockage/chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/ chock remover and making the continuous flow between two manholes for 200mm bore of pipe complete all as specified and directed. Note : The clear distance between two manholes shall be measured. |
| 4 | M&L for cleaning of sewer line of any depth, of any location manhole of any depth, section size between the sewer lines sewer line to septic tank/soakwell /sump well by means of sewage sucking machine or by way of any other suitable means including disludging foreign material, sand ashes fibre silt grease. night soil, etc and removing the taken out sludge/material out side MD land by any means/source keeping the sewage line functional for the 100 mm bore pipe lines complete all as specified and as directed |
| 5 | M&L for cleaning of sewer line of any depth, of any location manhole of any depth, section size between the sewer lines sewer line to septic tank/soakwell/ sump well by means of sewage sucking machine or by way of any other suitable means including disludging foreign material, sand ashes fibre silt grease. night soil, etc and removing the taken out sludge/material out side MD land by any means/source keeping the sewage line functional for the 150 mm bore pipe lines complete all as specified and as directed |
| 6 | M&L for cleaning of sewer line of any depth, of any location manhole of any depth, section size between the sewer lines sewer line to septic tank/soakwell/ sump well by means of sewage sucking machine or by way of any other suitable means including disludging foreign material, sand ashes fibre silt grease. night soil, etc and removing the taken out sludge/material out side MD land by any means/source keeping the sewage line functional for the 200 mm bore pipe lines complete all as specified and as directed |
| 7 | Removing blockage from WC/floor trap/nahani trap/gully trap upto 1st manhole complete all as specified and directed. |
| 8 | Taking down / out the covers from septic tank / soakage well and dewatering the contaminated / waste materials from septic tank/soak well / sump well of any liquid depth / capacity by means of using mechanical pumps disel driven with fuel or by operator sewage sucking machine or by way of any other suitable means including desludging foreign materials, sand shes fibre silt greease, night soil etc and removing the taken out sludge mixed materials/liquid out side MoD land of any means / sources and replacing the covers back to its normal its normal position complete all as specified and as directed.Note:- Volume of sludge shall be measured for the purpose of payment. |
| 9 | Cleaning /desludging of existing septic tank of any capacity / sump well of any dia and depth including taking out sludge in any form and other foreign materials etc viz sediment sand, ash grease, fibre, silt. Roots or vegetation means of sewage sucking machine or by or by way of any other suitable means and removing the sludge outside MoD land by any means including writing with date of cleaning with white paint in block size of 150x200mm complete all as specified and as direected. |
| 10 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc not exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 11 | Excavation over areas n. exc 1.5 mtr deep and getting out soft/loose soil complete all as specified and directed. |
| 12 | Excavation over areas exc 1.5 mtr deep and not execeeding 3.0m deep and getting out soft/loose soil complete all as specified and directed. |
| 13 | Returning filling in, including spreading. Levelling, watering and well ramming in layers not exc. 25 cm in soft/loose soil complete all as specified and as directed. |
| 14 | Removing excavated material (soil) to a distance not exc. 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 15 | Demolition and breaking up 200mm bore pipe drain pipes (Internal dia of pipe), (Salt glazed ware, AC or Reinforced concrete) ware set in cement mortar including PCC haunching and bedding, complete all as specified and as directed. |
| 16 | M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregated) as in concrete bed to drain pipe 200mm dia pipes including packing under and haunching against the sides of the pipes after laying & testing complete all as specified and as directed. |
| 17 | M&L for 200mm internal diameter salt glazed stone ware drain pipes grade 'A' laid in trenches & jointed as specified complete all as specified and as directed. |
| 18 | Demolition and breaking up 150mm bore pipe drain pipes (Internal dia of pipe), (Salt glazed ware, AC or Reinforced concrete) ware set in cement mortar including PCC haunching and bedding, complete all as specified and as directed. |
| 19 | M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregated) as in concrete bed to drain pipe 150mm dia pipes including packing under and haunching against the sides of the pipes after laying & testing complete all as specified and as directed. |
| 20 | M&L for 150mm internal diameter salt glazed stone ware drain pipes grade 'A' laid in trenches & jointed as specified complete all as specified and as directed. |
| 21 | Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed. |
| 22 | M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 metre mean radius as in full brick thick walls built in CM (1:4) using old size bricks complete all as specified and as directed. |
| 23 | M&L for Brickwork with sub class ‘B’ bricks in half brick thick honey comb walling, built in CM 1:4 complete as specified and directed. |
| 24 | M&L for loose filling with broken bricks 40mm to 80mm soakage complete all as specified and directed. |
| 25 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 26 | Material & Labour for rendering 15mm thick plaster on fair faces of brick or concrete surfaces in CM 1:4 with water proofing compound complete all as specified and directed. (Note : Supply only WPC shall be measured and paid separately). |
| 27 | Supply only liquid water proofing compound complete all as specified and directed. |
| 28 | M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete after demolition of existing concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 29 | M&L for plain cement concrete (1:2:4) type B0) (using 12.5 mm graded aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed. |
| 30 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as necessary to facilitate demolition complete all as directed. |
| 31 | M&L for precast RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar article with plain faces including necessary form work and set in CM (1:4) complete all as specified and as directed.Note :- Reinforcement shall be measured and paid for separately. |
| 32 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 33 | M&L for mild steel TMT bars 8mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia, complete, all as specified and directed. |
| 34 | Taking down eaves gutter and rain water pipes ( any size or pattern) including all fittings, heads,shoes, bends, swan necks etc including cleaning or refixing or removal to store complete all as specified & directed.( Measured overall as fixed along the centre line over fittings and accessories). |
| 35 | Supply & Fixing 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and directed. |
| 36 | Supply & Fixing 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 37 | Supply & Fixing 75mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and directed. |
| 38 | Supply & Fixing 75mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed. |
| 39 | Supply & Fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 40 | Supply & Fixing 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 41 | Supply & Fixing 110mm bore PVC (SWR) junction, single (Single T) equal or unequal complete all as specified and directed. |
| 42 | Supply & Fixing 75mm bore PVC (SWR) junction, double (double T) equal or unequal complete all as specified and directed. |
| 43 | Supply & Fixing PVC (SWR) branch piece, single (single -Y) equal or unequal 110mm dia complete all as specified & directed. |
| 44 | Supply & Fixing PVC (SWR) branch piece, single (single -Y) equal or unequal 75mm dia complete all as specified & directed. |
| 45 | Supply & Fixing Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable for 100 mm dia including drilling holes & fixed to wall with nails etc complete all as specified and as directed. |
| 46 | Supply & Fixing Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable for 75 mm dia including drilling holes & fixed to wall with nails etc complete all as specified and as directed. |
| 47 | S&F in repair PVC (SWR) Nahani trap 75 mm dia with grating including jointing with solvent cement complete all as specified and as directed. |
| 48 | S&F in repair PVC (SWR) gully trap 125x110 mm including jointing with solvent cement complete all as specified and as directed. |
| 49 | S&F PVC (SWR) vent cowl of 110mm dia complete all as specified and as directed. |
| 50 | S&F in repair PVC (SWR) 'P’ trap 110mm bore complete all as specified and as directed. |
| 51 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe, seat & PVC seat cover (white)closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe,antisyphonage pipe etc complete all as specified and as directed. |
| 52 | S&F in repair vitreous china squatting pan (Orissa pattern) of size 580x 440 mm white with integral foot rest,incl 'P' or 'S' trap & front or back inlet and maching the disturbed surface with Cement mortar or like etc complete all as specified and as directed. |
| 53 | S&F in repairs black plastic water closet seat cover, closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 54 | S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level colour with inlet ball, float and handle including brackets complete all as specified and as directed. |
| 55 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed. |
| 56 | S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 57 | Supply & Fixing in repair Grating doom 150mm dia of PTMT (Minimum weight 100gms) complete all as specified and as directed. |
| 58 | M&L for non-skid ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.11sqm but not exceeding 0.18 sqm in floor etc.set and jointed in neat cement slurry @ 3Kg/Sqm and pointed in white or coloured cement to match complete including 15mm thick Screed bed or bedding layer in cement mortar (1:6) including dismantling floor hearth wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish at the premises complete all as specified and as directed. |
| 59 | M&L for glazed ceramic (coloured) tiles of size 350x250x7mm / 450X 350X 7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing course in cement mortar (1:3) including dismantling floor hearth wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish at the premises complete all as specified and as directed. |
| 60 | M&L for water proofing treatment to sunken slabs following courses of treatment/specification (i) First layer of slury of cement @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementituous compound @ 0.253 kg/sqm. This layer shall be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with Acrylic based polymer modified cementituous compound @ 0.126 kg/sqm. This layer shall be allowed to air cure for 48 hours. (iii) 200 micron thick polythene film pasted with the help of adhesives shall be provided over the treatment complete all as specified and as directed. |
| 61 | M&L for PCC (1: 5:10) type E-2 as filling in sunken portion including demolition of concrete of any description complete all as specified and as directed. |
| 62 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) including disposal of the debries complete all as specified and as directed. |
| 63 | M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified. |
| 64 | M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. |
| 65 | M&L cement concrete (1:3:6) type C1 using 40 mm graded stone aggregate as in surface channels and drains concrete complete all as specified and directed. |
| 66 | M&L for PCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in walls, basement walls, ballast walls any thickness but in landing, cover slab (for manhole etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar article with plain faces complete all as specified and as directed. |
| 67 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed. Note :- Measurment shall be taken only for inner girth. |
| 68 | Material and Labour for finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed. |
| 69 | Materials and labour for Brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in CM 1:6 complete as specified and directed. |
| 70 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 71 | M&L for rendering 10 mm thick on faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 72 | M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg as in sub base & plinth protection, finished even and smooth w/o using extra cement complete all as specified and as directed. |
| 73 | Supply & Fixing 110mm bore PVC ( SWR) Pipes DOUBLE socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 74 | Supply & Fixing PVC ( SWR) branch piece, DOUBLE (DOUBLE -Y) equal or unequal 110mm dia complete all as specified & directed. Please Enable Macros to View BoQ information |
