Tender For Augmentation Of Dudhi Nagar Panchayat Water Supply Scheme Dist. Sonbhadraunder Amrut 2.0 Programme, Dudhi-Uttar Pradesh

TDR : 55188015

Tender Notice
BOQ

15 Days Left

Dudhi , Uttar Pradesh

Tender Brief : Tender For Augmentation Of Dudhi Nagar Panchayat Water Supply Scheme Dist. Sonbhadraunder Amrut 2.0 Programme

Document Fees
₹ 23600 /-

EMD
₹ 3730000.0 /-

Tender Value
₹ 37.29 Crore /-

Submission Date
07-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Construction of IntakewellInvestigation, Planning, Design, soil investigation (up to boring 30m depth) and Construction of CONSTRUCTION OF INTAKE WELL CUM PUMP HOUSE as per design WITH RCC FOOTBRIDGE up to 150 m length and 4.50m width(with 0.5m width both side foothpath colour zigzag M30 concreting paver blocks ) with rcc pier with both side handrail 1.8m height all necessary equipment & Appurtenant Works, including Electrical works, including supply of all materials, labor, tools and plants etc. Provision for piping work for flushing choking material from the inlet pipe complete as per instruction of engineer in charge. Provision for inlet pipe of 400 mm dia (4x15m). Supply and fixing of Kirloskar valves 3 nos of Pn 10 of dia 400 mm with spindle/wheel with all mountings and accessories complete. Supply and fixing of M.S. Ladder for Construction of Intake Well inside the reservoir of dam or river, with minimum required depth and diameter as mentioned below with pump house in RCC framed Structure, of minimum height of 6.0 m with required length of RCC footbridge with railing, of minimum 2.5 m clear width or more as required to transport the pumping plant machinery by vehicle excluding curb, piping & cable, pump floor level minimum 1.5 m above HFL, water inlet openings with sluice gates, having different intake capacity of water at different inlet points, construction of spiral RCC staircase upto bottom, grit chamber with mechanical scraping belt or bucket for de-gritting the well, Pump house operating Slab, a separate electrical gantry of suitable capacity, cement concrete floor with hardener, rolling shutter fabricated from steel, Circular Balcony minimum 1 m width, staircase post-column beams, Railings, development of land, approach road etc. arrangement should be made inside pump house such that to fix required nos. of VT Pumps mentioned in item nos. 4, HT and LT panels and starters, including all earthing as requried, instrumentation & SCADA & wireless telemetry (voice & Data), internal and external electrifications and adequate LED lighting including excavation of soil i.e. Kankar mixed morrom/soft/hard rock and concrete of minimum grade of M-15 and all R.C.C. work in grade M-30 or above in raft/pile foundation, Intake, RCC, wall with supply of all type steel bars of approved quality and cement as approved by the Employer, cofferdam construction with bailing out water as per site construction requirement diversion arrangement of flow of river during construction by making bundh across the river supply with gunny bags, sand, fixing suitable size of steel girder, dismantling and refixing etc. and also supply and fixing of collapsible gate, Aluminium door, Aluminium window as per relevant specifications, fresh air circulation arrangement, including of one-coat Primer, two coat Distamper in inner side & external painting with apex ultima/equivalent paint, all steel work must be painted with red oxide paint and two coat of anticorrosive paint etc. and internal and external electrification of intake well, supply and fixing of three-row railing of 20 mm dia GI Pipe with M.S. Angle posts supply and fixing of inlet openings of required capacity, including supply of all materials, all labor T&P etc. required for proper completion of works as per direction of the Engineer and Consultant, Anything not mentioned will be as provision laid down in CPHEEO GOI Manuals. Cost of VT Pumps, Motors. Panels, SCADA, Panel Board, Pipes etc. are not covered in this item.
2	Construction of Water Treatment Plant Survey, Investigation, Planning, Design, Construction and Commissioning of WTP capacity 2 MLD with CWR as per required capacity. For construction of WTP, Admin Building with Command Control Room, Sub station room and fire fighting arrangements, first aid arrangements Circular Cascading Aerator, Inlet chamber, alum dosing, pre-sedimentation Tank, Rapid Mix, Vertical Flow Clarifloculator, Rapid Gravity Filter with Back Wash Arrangement, Proper Sludge Disposal and Backwash water disposal arrangements to nearest drain/low laying area & Appurtenant Works. Automated through PLC with outputs to SCADA, walkway in between WTP components with railing, Guard Room, Chemical Store House, Gaseous Chlorination Plant, Development of WTP area with adequate plantation, Rainwater harvesting unit. Raw water to be treated and filtered. Lean concrete to be used of grade not less than M-15 and other structures in minimum M-30 grade of concrete. Cement and steel should be as per approved by the Employer/IS code. Collapsible MS steel doors and aluminium windows to be provided including of One-coat Priming, internal two coat Distamper painting, external painting with apex ultima/equivalent paint/Weither Paint, all steel work must be painted with red oxide paint and two coat of anticorrosive paint etc. and internal and external electrification with adequate LED lights for the compound, including automation, instrumentation & SCADA, wireless telemetry (voice & data) Including water testing kits, lab building and essential lab equipments Including supply of all materials, labour T&P etc. required for proper completion of works as per direction of the Engineer.
3	Supply of all materials, labour, tools and plants for Renovattion /Augumentation of existing water Treatment Plant, comprising of Presedimentation Tank/Rapid Mix/Vertical Flow Clarifloculator / Rapid Gravity Filter Back Wash arrangment, disinfection unit,Recycle arrengments, Gaseous chlorinator & Appurtenant works of 2.0 MLD Capacity. including all damage plaster with painting of three-coat whitewashing, internal two coat acrylic painting , external painting with apex ultima/equivalent paint,replace/ repair of DOOR & WINDOW/VENTILATION all steelwork / wooden work must be painted with red oxide paint and two coat of anticorrosive paint etc. and internal and external electrification with adequate LED lights for the compound, including automation, instrumentation & SCADA, wireless telemetry (voice & data) including all civil and E&M work etc. complete as per direction of engineer incharge.not mention in above work can be done as per instructed on report IIT BHU VARANASI (work exceution as per inspection of IIT BHU VARANASI) OWN VETTING/ INSPECTION COST BORNE BY CONTRACTOR.
4	Rising Main :- Supply of following sizes (DI K-9) pipes for rising main system conforming to latest/relevant I.S. 8329/2000 Specifications with all jointing materials such as MJ joints, tee ,bends, all required mild steel fabrication works (if MS fabrication used, its proper protection treatment against corossion must be done) and all DI specials conforming to latest /relevant I.S. specifications, suitable for D.I pipes, as per IS‐1239 /2000 and IS 8329/2000 or their latest amendment & CPHEEO latest amendments including F.O.R. destinations rate per metre in Rs., anywhere in U.P. including cost of one Rubber Gasket per pipe length & iniclusive of all Taxes & Duties, Third Party Inspection Charges, Packing & Forwarding Charges, Transit Insurance Charges, Road Transportation Charges etc. with loading, unloading and Carting up to store,HYDRAULIC TESTING AS PER CPHEEO MANUALS latest amendments also including specials for these pipes all complete as per instructions of Engineer ‐in ‐ charge.
5	300 mm dia
6	200 mm dia
7	150 mm dia
8	Supply of following sizes of CI D/F Sluice valves as per IS-780-1960 tested to 10Kg / Cm2 fixing in pipelines trenches, jointing and testing etc. complete.
9	300 mm
10	200 mm
11	150 mm
12	Earth work in ordinary soil, In Moorum /Kankar / Shingle, In Soft/Medium rock. Etc. loam, clay or sand with lift upto 1.50M and lead upto 200m, filling watering and ramming of excavated earth into the trenches and disposal of surplus earth upto 8KM.
13	In Ordinary soil
14	In Moorum /Kankar / Shingle etc. (with replace loose soil)
15	In Soft/Medium rock. (with replace loose soil)
16	Carting from store (upto 8 Km) the following sizes of D.I.Pipes (class K-9) and specials to the site of work, lowering them in to trenches and laying true to alignment and gradient and jointing etc. complete including testing of pipeline and cutting of pipes for making up the langth as required for proper completion of work (but excluding cost of trenching) upto the satisfaction of Engineer-In-Charge.
17	300 mm
18	200 mm
19	150 mm
20	Carting of following sizes CI D/F Non Return valve from departmental store to site of work lowering the same into trenches and fixing in position and jointing the same with supply of all material and testing etc. complete.
21	300 mm
22	200 mm
23	150 mm
24	Supply of all materials, labours T&P etc. and construction of masonary type sluice valve chamber.
25	Thrust Block
26	Supply of all materials,labour, and T & P etc. and construct R.C.C.(M-25 grade) thrust blocks. Including mild steel (1%)works all complete as per design for following size and instructions of Engineer ‐in ‐ charge.
27	300 mm (size 1.15m x 1.15m x 1.15m)
28	200 mm (size 0.85m x 0.85m x 0.85m)
29	150 mm (size 0.70m x 0.70m x 0.70m)
30	Dismantling of following type of road surface including stacking of serviciable material and disposal of unservicable material within the limit of npp upto 8km distance including supply of all labour T&P etc. required for proper completion of the work as per instructions of Engineer ‐in ‐charge.
31	Bituminous Road
32	C.C. Road
33	Interlocking Road
34	Re-instatement of following type of road surface of PWD/ UPJN specifications including supply of all materials, labour, T&P etc. required for proper completion of the work as perinstructions of Engineer ‐in ‐charge.
35	Bituminous surface (20cm sand, 20cm GSB, 20cm WMM, 5 cm to 8 cm DBM, 3cm to 4 cm B.C.) payment made upto WMM- 50%, DBM- 30% and BC with testing in NABL aproovedlab/PWD- 20%
36	C.C. Road in M25 grade, minimum thickness 15cm on 15cm sand & 20cm GSB filling base.
37	Interlocking Road (50% new Interlocking bricks M-30 grade, 80 mm thick on 10cm sand & 10cm GSB filling base)
38	Providing and laying of GSB for reinstatement of earthen road (Shoulder) including dressing, watering, ramming etc. complete.
39	Provision for crossing of Nala/Culvert including making specials and supply of materials, 6mm thick MS Pipe for casing labour, t&P etc. complete.
40	Crossing of Thema River:- Survey, Investigation, Design,soil investigation , Drawing, Planning, Construction as per latest I.S. CODE, for River crossing, including supply of required PIPES wth specials, excavation in soil mixed with moorum, shingle, kankar, soft rock, hard rock for foundation, dewatering and diveration of water,construction of coffer dam, PCC M-15 for bedding, RCC M-30 grade for foundation/raft/piles, RCC M-30 grade for pedestral & chairs, MS claps of required width and thickness, including all fastening arrangement nut and bolts, all type steel bars of approved quality and cement as approved by the employer, Mild Steel or iron work, stuctural steel work and MS TRUSS in single stanchions composed of RSJ, channel, etc, with caps, bases, mild steel plates, angles, brackets, cleats, gusset plates, anchor bolts, etc. including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/ bolted / welded connections and one coats of anticorrosive paint and over it two coats of oil painting, etc other unforeseen Items, site clearance, etc. as per detailed design and drawing or as directed by Engineer-in-charge incl. all materials, labours, t& p etc.
41	Provision for Crossing and laying of pipe line of both side at State/National Highway and payment to state/NHAI Authority for permission of National Highway crossing:- Survey site Investigation Planning , design Drawings, excavation, dismentaling, road restoration & other all utility restoration( as per required) as per NATIONAL HIGHWAY standard as per MORTH Road manual and vetting / checked from State Road/ NH DIV. PWD/NHAI/UPSHA/ PWD/ Divisional Office and taking NOC CHARGES.(incl. noc fees, licence fees, security amount) for trenchless crossing of National highway road , Road for required dia Rising main pipe with casing pipe as required for proper completion of work also including security money deposited to State Road department and Execution of all work in the present of State Road staff / Engineers including of supply of required dia MS carrier pipe and required size of MS casing pipe as per drawing and as per (IS:3589 & made from confining to IS:2062) with 750 Micron th. food grade coating internally and 750 MM TH. MICRONE anti corrosive bituminous paint externally by trenchless technology method at an average depth 3.60 mtr from normal ground level up to top of casing pipe including excavation & sand filling of Pit, Dewatering arrangement, Supporting system for soil, also including supply and fixing of 2 no Sluice valve ISI Mark, construction of sluice valve chamber etc. all complete work including supply & fixing specials in carrier pipe over main pipe, as per specification given in the bid documents including supply of all materials, labour T&P etc. for proper completion of work as per instruction of Engineer. and concerned department. (CASING- 600MM (id) MS PIPE 12 MM THICK & CARRIER PIPE- AS PER REQUIRED DESIGN) INCL.3M C/C SPACER
42	Provision for Railway Crossing:- Survey site Investigation, Planning , design Drawings as per Railway Divisional Office and taking NOC with all fee/ security/ liecence fee/ for NOC from RBCS PORTAL for trenchless crossing of Railway track(crossing length up to 45M), required dia DISTRIBUTION main pipe with casing pipe ( 600 MM DIA (ID) MS PIPE TH. 12MM) as required for proper completion of work also including security money deposited to Railway department and Execution of all work in the present of Railway staff / Engineers including of supply of required dia MS carrier pipe and required size of MS casing pipe as per drawing and as per (IS:3589 & made from confining to IS:2062) with min 750 microne th. foodgrade epoxy coating internally & anti corrosive bituminous paint externally by trenchless technology method at an average depth 5.00 mtr from normal ground level up to top of casing pipe including excavation &sand filling & restoration of Pit, Dewatering arrangement, Supporting system for soil, also including supply and fixing of 2 no Sluice valve ISI Mark, construction of sluice valve chamber with frame cover etc. all complete work including supply & fixing specials in carrier pipe over main pipe, as per specification given in the bid documents including supply of all materials, labour T&P etc. for proper completion of work as per instruction of Engineer. all works excution as per guidlines of ministry of RAILWAY (CASING- 600MM (id) MS PIPE 12 MM THICK & CARRIER PIPE- AS PER REQUIRED DESIGN) INCL.3M C/C SPACER
43	Supply of all materials labour T&P etc. for complete construction of R.C.C. (M30 Grade) Over Head Tank of following capatity and staging min 0.6m above ground level with main components, soil testing and assuming bearing capacity of soil as 8MT including cost of supply of design and drawings. all the water retaining components of OHT shall be casted in M-30 grade cement concrete and minimum grade of concrete of foundation and staging should be M-25 with approved cement, coarse sand and stone grit as per I.S. 11682 and I.S. 456 seismic effects and wind load should be taken into consideration as per I.S. 1893 for earthquake resistance and I.S. 875 Part-III for wind load on structure and including 1M wide RCC doglegged staircase with separate columns, 1m wide R.C.C. M30 balcony, M.S. ladder made of 50x50x6mm angle section and 20mm plain M.S. bars with hand rails of 20mm medium class G.I. pipes, one aluminum ladder inside the tank from top dome to bottom dome, R.C.C. railling with 20mm dia medium class G.I.pipe (in 3 rows) on both sides of stair case, supported on 50x50x6mm M.S. angle section, spaced at intervals not more than 1.5m, proper ventilator at top dome in circular shape of 1.5m dia, Ultra Sonic Water Level Indicator fabricated with sensor connecting to automation, lightening conductor as per I.S.S. 2309 or its latest amendments of latest electricity rules, consisting of proper elecation rod with 5 or more fork points as prescribed in ISS 2309-1969 and ISS 3013-1966 C.I. manhole of min 60x60cm size with locking arrangement, supply, fixing, jointing of D.I.D/F Pipes of appropriate size with D.I.D/F specials conforming to IS 8329/2000 as vertical pipes for all required no of inlet (200mm OR as designed), all required no of outlet (250mm or as designed for each DMA), overflow and washout as per latest/relevant I.S. specification with all jointing materials for proper completion of work along with Sluice valves with actuator,s construction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit, construction of washout/ overflow chamber and chambers for sluice / butter fly valves as per departmental type design and drawings, supply of 200mm dia PVC pipe as per I.S.-4985/2000 for disposal of water from overflow and washout chamber to suitable point outside the water works compound, painting of all concrete surface and steel pipe works with three coats.
44	For Zone-1 (450 KL/16 m stagging)
45	For Zone-4 (250 KL/22 m stagging)
46	Repair of RCC Over Head Tank 350 KL/16 m Staging and allied works in water campus including Providing and fixing double scaffolding system (cup lock type) on the exterior side of OHT, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @ 0.05kg/running metre and while the suface is tacky filled the groove up to surface with crystalline mortar @1.50kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @1.50kg/running metre. 18 mm cement plaster in two coats under layer 12 mm thickcement plaster 1:5 finished with a top layer 6mm thick cementplaster 1:6. Providing and injecting approved grout (OHT tank body) in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-inCharge. Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work. Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. Epoxy injection grout in concrete/RCC work of approved make. Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures. For vertical surface one coat @1.40 kg per sqm., Cone wall, wall inner, column inner, For horizontal surface one coat @1.10 kg per sqm for Bottom Dom including repairing of MS ladder, 1 m vide RCC balcony, railing, ventilater of top Dome, Water Lever Indicator, CI Mainhole., Sluice valve and Construction of S.V. Chamber, Cleaning of OHT and Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete., Finishing of all Wall/concrete surface in two coat premium acrylic smooth exterior paint with silicon addive, with one coat of exterior primer over smooth base of white cement. cement based wall putty and steel pipe works with three coats of approved cement paint and anticorrosive paints.,foodgrade epoxy painting internal part of water containe with 3 coat, Painting of all m.s./ steel pipe works with three coats of approved cement paint and anticorrosive paints.
47	Construction of Common CWR 400 KL under Zone-1 for Water Demand of Zone-1/2/3 & 4 - Survey, Investigation, Soil Testing, Planning, Designing, Construction, Commissioning of CWR of 400 KL. The Concrete in a minimum grade of M-30 and steel to be used as per IS code and approved by Employer. Seismic effects and wind load with earthquake resistance should be taken into account in the design. CWR should be provided with a ventilator, manhole of adequate size. An aluminium ladder minimum of 0.45 m wide in manhole should be provided. Ultrasonic water level indicator should be provided along with lighting conductor as per IS 2309. PCC of M-10 grade to be used in bed blocks. Inlet, Outlet and Overflow arrangement with the supply & installation of pressure pipe of the suitable dia, for taking overflow water to a suitable low lying area. Painting of all steel and concrete pipes with 3 coats of approved cement plaster and anticorrosive paint including all labour, material, T & P etc., all required for proper completion of works as per the direction of the Engineer.
48	PUMP HOUSE - Survey, Investigation, Planning, Designing, Construction, Commissioning of Pump houes of required size to accommodate required nos of pumps. For the construction of Pump House above CWR, minimum 6 m height is to be kept with suitable arrangements to install and dismantle VT/HSC pumps and installation of Fire Extinguishers, Power wiring & earthling system, rubber resistance sheets, spares for motors & switchgear, internal & external electrifications and adequate LED lighting, brickwork 1:4 (one cement and four sand), plasterwork 1:4 (one cement and four sand). Steel and cement to be used as per approved by Engineer-in charge / IS code. Reinforced Cement Concrete minimum M-25 to be used including fixing of doors, windows, shutters, glass panels with gantry girder arrangement with supply and fixing of suitable sizes of steel girder including snowcem painting two coat over one priming coat using approved Colour and shade and whitewashing three coat of ceiling of pump house and painting over new ironwork with one coat of primer and two coat of approved paint including cost of all arrangement of staircase, balcony with medium G.I pipe 20 mm size three row railing, shuttering, scaffolding and water with supply of all materials, labours T&P etc. required for proper completion of works as per direction of the Engineer.
49	Construction of electric power sub-station room- Survey, Investigation, Soil Testing, Planning, Designing, Construction of electric power sub-station room (8.00m X 5.00m X 4.00m) of required size. Construction of RCC frame structure room including excavation of soil i.e. Kankar mixed morrom/soft/hard rock, PCC for bedding in lean concrete of minimum grade of M-15, R.C.C. in grade M-25 or above in footing, foundation, plinth beam, column, lintel beam, chajja, roof slab, brick work in CM 1:4 (1 cement & 4 sand) in walling, Internal plaster 12 mm thick for walls & celling in CM 1:4 (1 cement & 4 Sand), External plaster 20 mm thick in CM 1:4 (1 cement & 4 sand), providing laying hand cut polished kota stone flooring 25 mm to 30 mm thick on bed of CM 1:4 (1 cement & 4 sand) including cement float, filling jointing with neat cement slurry, curing polishing and cleaning, providing cable duct of required size, including fixing of rolling shutter, aluminium windows & ventilator with glass panels as per specifications, providing and applying white washing in two coat to new plaster surface, internal two coat snowcem painting including priming coat, external painting with apex ultima/equivalent paint including priming, painting over new iron work with one coat of primer and two coat oil paint of approved make including cost of all arrangement of shuttering, scaffolding including all materials, labours T&P etc. for proper completion of works as per direction of the Engineer. At Intake works and Zone 1
50	Construction of LCS Room size of 6m x 4m x 4m including Supply all materials, labours T&P etc. all complete work including Excavation, PCC(M-15), RCC(M-25), Brick work(1:4), plaster(1:3), painting, door window, collapsible steel shutters, electric wayring etc. all complete work. Cement and steel should be as per approved by the Employer/IS code. Collapsible MS steel doors and aluminium windows to be provided including of three-coat whitewashing, internal two coat putty with acrylic painting, external painting with apex ultima/equivalent paint, all steelwork must be painted with red oxide paint and two coat of anticorrosive paint etc. and internal and external electrification with adequate LED lights for the compound.
51	DISTRIBUTIONS SYSTEM :- Supply of following sizes (D.I.) pipes for rising main system conforming to latest/relevant I.S. 8329/2000 Specifications with all jointing materials such as MJ joints, tee ,bends, all required mild steel fabrication works (if MS fabrication used, its proper protection treatment against corossion must be done) and all DI specials conforming to latest /relevant I.S. specifications, suitable for D.I pipes, as per IS‐1239 /2000 and IS 8329/2000 or their latest amendment & CPHEEO latest amendments including F.O.R. destinations rate per metre in Rs., anywhere in U.P. including cost of one Rubber Gasket per pipe length & iniclusive of all Taxes & Duties, Third Party Inspection Charges, Packing & Forwarding Charges, Transit Insurance Charges, Road Transportation Charges etc. with loading, unloading and Carting up to store,HYDRAULIC TESTING AS PER CPHEEO MANUALS latest amendments also including specials for these pipes all complete as per instructions of Engineer ‐in ‐ charge.
52	DI pipe Class K-7 (IS-8329/2000)
53	100 mm dia
54	125 mm dia
55	150 mm dia
56	200 mm dia
57	250 mm dia
58	300 mm dia
59	350 mm dia
60	400 mm dia
61	Earth work in ordinary soil, In Moorum /Kankar / Shingle, In Soft/Medium rock. Etc. loam, clay or sand with lift upto 1.50M and lead upto 200m, filling watering and ramming of excavated earth into the trenches and disposal of surplus earth upto 8KM.
62	In Ordinary Soil
63	In Moorum /Kankar / Shingle etc & incl. replace of ordinary soil.
64	In Soft/Medium rock. & incl. replace of ordinary soil.
65	Carting of site of work, laying and jointing of DI pipes in trenches including lowering, testing and supply of all jointing materials etc. complete.
66	DI pipe Class K-7 (IS-8329/2000)
67	100 mm dia
68	125 mm dia
69	150 mm dia
70	200 mm dia
71	250 mm dia
72	300 mm dia
73	350 mm dia
74	400 mm dia
75	Supply of following types of fittings including railway freight, cartage from store to site of work, all taxes and duties etc. complete. CI D/F Sluice Valves, Scour Valve Class-I as per IS 780 (1969) & CPHEEO MANUALS latest amendments suitable for a working pressure of 10 Kg / Sq.Cm. (using without galendori valves)
76	100 mm dia
77	125 mm dia
78	150 mm dia
79	200 mm dia
80	250 mm dia
81	300 mm dia
82	350 mm dia
83	Scour Valve 100mm dia
84	Fire Hydrant 80mm Dia
85	Air Valve 25mm Dia
86	Carting of following sluice valves store to site of work, lowering, fixing and jointing of following fitting in trenches :
87	100 mm dia
88	125 mm dia
89	150 mm dia
90	200 mm dia
91	250 mm dia
92	300 mm dia
93	350 mm dia
94	Scour Valve 100mm dia
95	Fire Hydrant 80mm Dia
96	Air Valve 25mm Dia
97	Supply of all types of materials and construct following chambers as per type design with supply of all labour, T&P etc. completed.
98	S.V. Chamber (Surface Box Type)
99	S.V. Chamber (Masonary Type)
100	Air Valve Chamber
101	Fire Hydrant Chamber
102	Dismantling of following type of road surface including stacking of serviciable material and disposal of unsericeable material within the limit of npp upto 8km distance including supply of all labour T&P etc. required for proper completion ofthe work as per instructions of Engineer ‐in ‐charge.
103	Bituminous Road
104	C.C. Road
105	BOE Road
106	Interlocking Road
107	Re-instatement of following type of road surface of PWD/ UPJN specifications including supply of all materials, labour, T&P etc. required for proper completion of the work as per instructions of Engineer ‐in ‐charge.
108	Bituminous surface (20cm sand, 20cm GSB, 20cm WMM, 5 cm to 8 cm DBM, 3cm to 4 cm B.C.) payment made upto WMM- 50%, DBM- 30% and BC with testing in NABL aprooved lab/PWD- 20%
109	C.C. Road in M25 grade, minimum thickness 15cm on 15cm sand & 20cm GSB filling base.
110	B.O.E. surface (50% new 1st class brick on 10cm thick sand base)
111	Interlocking Road (50% new Interlocking bricks M-30 grade, 80 mm thick on 10cm sand & 10cm GSB filling base)
112	Providing and laying of GSB for reinstatement of earthen road (Shoulder) including dressing, watering, ramming etc. complete.
113	Provision for crossing of square drain including all material, labour & T&P etc. complete. Up to 4 mtr span up to 200mm dia. Pipe
114	Provision for NALLA/CULVERT CROSSING UP TO 300MM DIA PIPE CROSSING 5M including all material, for casing etc. all complete work. With concereting casing M20 grade using
115	Provision for NALLA/CULVERT CROSSING UP TO 300MM DIA PIPE CROSSING 7M ncluding all material. all complete work. With concereting casing M20 grade using
116	THRUST BLOCK
117	Supply of all materials,labour, and T & P etc. and construct R.C.C.(M-25 grade) thrust blocks. Including mild steel works(1% ) all complete as per design for following size and instructions of Engineer ‐in ‐ charge.
118	100mm ( Size 0.55m x 0.55m x 0.55m)
119	125mm ( Size 0.60m x 0.60m x 0.60m)
120	150mm ( Size 0.70m x 0.70m x 0.70m)
121	200mm ( Size 0.85m x 0.85m x 0.85m)
122	250mm ( Size 1.00m x 1.00m x 1.00m)
123	300mm ( Size 1.15m x 1.15m x 1.15m)
124	350mm ( Size 1.25m x 1.25m x 1.25m)
125	Shifting of Utility as a water supply pipe line/Connection, sewer line/Connection, drainage pipe,Telephone line/pole, Electric pole/ cable, tree cutting etc. all complete work including all material, Labour, T&P etc for whole project. (all overhead / underground utility)
126	Making House Connection should be done from distribution pipe line to outer wall of house or 2.0 m inside the boundary wall with provision of tap including supply of 7.0 m HDPE Pipe(is code 4984 with latest amendments) 20mm dia, PN- 12.5, PE-100, SDR-11 (0.6m depth below ground level), and 4.0m 15mm dia (ID) G.I. Pipe, Class-B and keeping the G.I. pipe atleast 1.0m in height above the G.L. as per department type design and Drowing including supply of specials, saddle, clamps etc. of suitable size, ISI mark 6mm BRASS FERRULE conforming to latest/relevant I.S. 2692/1989 or their latest amendments, BRASS Tap, all Materials, labours, T&P etc. complete, Dismentelling of all type of road surface, breaking of all type of floor, wall, and disposal of unserviceable materials up to 8km. Excavation pit/trench, cutting of pipe, Bailing out of water, carting and lowering them unto the already prepared trenches, fixing in position and jointing them with pipelines and testing etc, Grounting by CC 150mm x 150mm x 150mm size in M20, Restoration of pit, trench/Road (as site condition NON PAVED, BOE, CC, INTERLOCKING BRICKS, Bituminous road, RAMP, DRAIN, WALL, FLOOR etc.) as per PWD/UPJN SPECIFICATION and 3 nos GPS location colour photographs submitted after complition of work. Also including GIS Based Survey to collect all required data in projected area Nagar Panchayat Dala Bazar for proper complition of work as per drawing and. As per Instruction of Engineer in charge as per drawing. Payment make after completion of work up to household 50%, RETORATION & GROUTTING-30% and 20% submitted of photographs after Testing and Commisioning & handover to NP DUDDHI of all remaining work.
127	New Connections with New pipe line.
128	Shifting of Existing House Connection from Old Pipe line to New Pipe Line
129	Provide all materials, labour T&P etc. and construct following single RooM staff quarter with bathroom, latrine & kitchen as per departmental specification and drawing Including excavation in foundation, PCC(M-15), Brick Work (1:6), 20mm thick DPC, RCC(M-20), 12mm thick plaster(1:4), Floring with tiles, Painting, Wiring / water supply & sanitary etc complete work. all materials, labours, t& p etc.( RCC FRAME STRUCTURE 3.6 M HEIGHT WTH PLINTH NOT LESS THAN 0.6 M)
130	Construction of 1.5 m high and 115mm thick boundary wall (Intakewell Campus, Zone-1 , Zone-4) with 230 mmx230 mm thick pillar made in RCC in 1:1.5:3 the spacing between two pillar should not be more than 3.0 m c/c and the depth of foundation should not be less than 0.60m below N.G.L. and plinth height should be kept 0.45m above N.G.L., Brick Work in 1:4 and 12mm thick plaster with cement and coarse sand in the ratio of 1:4, painting with weatherproof approved paint, at the site of water works as per departmental type design and drawing, as per specifications given in the bid document and pwd/upjn, including supply of all materials, labour T&P etc.for proper completion of the all work as per instructions of Engineer ‐in ‐ charge.
131	Supply and fixing of 3.6 m x 1.30 m MS gate including fabrication and supply of steel and construction of RCC pillars of size 1.5m x 0.23m x 0.23m in M25 grade with ornamental brick work 115mm thick around RCC pillers with elctrification and lighting arrangement, brick work in foundation 1:4 cement & fine sand upto plingth, as per departmental type design and drawing and as per specifications of pwd/upjn and laid down in the bid document, including supply of all material, labour,T&P etc.required for proper completion of the work as per instructions of Engineer‐in‐charge.
132	MS Gate (size 3.60 m X 1.30 m) minimum weight 1.60 Qtl
133	MS Wicket gate (size 1.20 m X 1.30 m) minimum weight0.50 Qtl
134	Filling of earth at lower portion including leveling and dressing at water works.
135	Provision for arboriculture/ greeneries/ plantation for development of water works ( REQUIRED all nonusing area) with pipe sprinkling arrengments. For ZONAL WATER WORKS
136	Construction of Cement Concrete USING 20 CM TH. M25 grade using concrete type & 30 cm GSB BASE approach road including supply of all materials, labour, tools and plants etc. complete.
137	Supply and Construction of roof top rain water & ground water harvesting system including all required materials, labour, tools and plants etc. complete. ( boring depth 2nd layer strata)
138	PUMPING PLANT AT INTAKE WELLSupply of vertical turbine forced clear water/oil lubricated raw water pump set along with V.H.S. squairal cage induction motor with shaft, 30 meter column pipe, tentative it will be decided as per site required thrust bearing, motor stool foundation bolt etc. suitable to operate 415 volt, 3 phase, 50Hz, AC Supply (2 W+ 1 S). LPM - 1350 Head-65 M (both tantative)
139	CE/UL certified PLC/RTU with redudant CPU and power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redudant CPU and power supply with analog /digital parameter and features as specified for each zps/oht to store and trasmitt data on GSM backbone , RTU/PLC designed with logic to transfer data at multiple statins as specified in tender document
140	GSM/GPRS based wireless communication system for RTU capable to transfer and gather data from remote sites to control stations. All accessories included with signal enhancer, antennan etc.
141	Control panel with IP 54 protection, industrial grade fo rall equipment separate fo rcontrol (24v) and power equipment.
142	Intelegent Energy meter with memory RTC and 2 serial parts integrated with RTU
143	Motor operated sluice valve with actuator complete in all respect
144	Electric motor operated sluice valve 150mmdia along with actuator for delivery pipe of pump.
145	Electric motor operated sluice valve 200mm dia along with actuator for common header.
146	Auto phase reversal unit/ automatic transformer suitable with inbuilt time delay & enclose of 100 Amp rating
147	Rador type level sensor for intake well level measurement with RTU communication.
148	Pressure Transmitter along with manual pressure gauge
149	Isolation transformer & surge arrestor.
150	CE/UL certifiedd 7 inch HMI touch screen suitable to communication with PLC/RTU for local display and control.
151	Control cabling for intake well including all power and control cable for all equipment (1.5sq mm, 10cx1sq mm, 2cx1sq mm other required items for pump set.
152	Security serveilliance camera IP with recorder
153	ELECTRO MAGNETIC FLOW METER
154	Provision of Electro magnetic flow meter suitable to measure the water discharge and to be fitted in common header of 200mm dia.
155	FLOW SENSOR
156	Type - Pulsed DC
157	End connection- Flanged of Carbon steel
158	Flange rating - PN 16 size 200 mm.
159	Electrode - SS 316
160	Lining Material - Hard rubber
161	Protection category - IP 68
162	Measuring Accuracy- + 5% of measured
163	Valve inclusive of linearity repeatability pressure effect and Hystrusues between 1 to 3 meter per second.
164	Sensor Housing - SS 304 with fully welded construction
165	Connection/ Junction Box - SS 304
166	Earthing only grounding rings required
167	FLOW TANSMITTER CONVERTOR
168	Type - Micro processor based modular desing
169	Display - 3 line back lit LDC for indication of actual flow rate forward reverse sum totolizer.
170	Protection category - IP 65
171	Enclosure - DI - Cast Aluminium with poly urethan with glass window.
172	Programming- Through three key pad as front facia.
173	Power Supply - 230 volt 50 HZ AC
174	Cable Gland - ½ NPT
175	Mounting - Wall mounted
176	Maximum Sepration - Upto 300 m between sensor and transmeter without any signal boosters.
177	Terminals - shock-Hazard-protected push lock terminal.
178	Error Indetification : 0.3, 6/22 MA
179	Flow Indicator Totalizer - 3½ digit IED display with 6 digit electro mechanical Totalizer.
180	MAIN PIPING & VALVES INCLUDING COMMON HEADER :-
181	Size of Delivery of pump 150mm dia length as per site requirement
182	Size of Common header of 200mm dia. length as per site requirement
183	Supply of following
184	CI D/F Reflux Valve 150 mm dia -3 Nos.
185	CI D/F Tee 200x200x150 mm dia. -3 Nos.
186	D/F distance piece 150 mm dia. 1.00 m. long - 3 Nos.
187	D/F distance piece 200 mm dia. 1.50 m. long - 3 Nos.
188	D/F distance piece 200 mm dia. 3.00 m. long - 3 Nos.
189	Dismantling joint 150 mm dia. - 3 Nos.
190	Dismantling joint 200 mm dia for common header - 1 No.Reflex valve 200mm dia 1No.
191	Nut-bolts, bend,rubber packing (as required)
192	Any other Item required for proper installation of above pumps. - 1 Job.
193	POWER WIRING CABLE FOR INCOMING PANEL & PUMPS :-
194	Supply of 1100 volt grade 50mm2 x 3½ core/ suitable size P.V.C. Armoured Alluminium conductor cable from outgoing of transformer to L.T. incoming Panel and for power wring of pumping plant.
195	HOT crane
196	Provision of H.O.T. crane of 3 Ton capacity along with gantry girder and chainpully block and geared trolly suitable for 12 span and 12 meter clear lift complete in all respect for circular pump house, suitable for travelling length.
197	POWER WIRING :
198	Power wiring complete for L.T. panel, starter and for 3No. pump set and rubber sheet.
199	EARTHING :
200	Provision for double plate earthing for 3 nos. of electric motors, starters, panels etc. excavation of earthing pit of required size supply and burrying of 600 mm x600 mm size 3mm thick copper earth plate vertically errected for earthing with its top at least 3 meter from ground level completed with 32 mm G.1. perforated pipes and funnel for watering, laying and fetting of earthing strip, CI boxes hinged cover masonary, laying alternate layers of characoal / coak and salt at least 150 mm thick each layer complete in all respect.
201	PAINTING
202	Provision for painting of all the pumps set, main piping and valves, panels etc. installed in the pump house with three coats by enamel paint.
203	INSTALLATION OF \\" SCADA\\"
204	Installation of SCADA system, to control the 3 set of pumping plant including testing and commissioning etc.
205	INSTALLATION AND COMMISSIONING
206	Installation of all 3 no.pumping plants along with L.T. panels distribution boards, switch gear control panels, starter etc laying & jointing of column pipes, delivery pipes, common header also commissioning of pumping plant.
207	Electrification for pump house and premises.
208	Electrification of pump house and campus with copper conductor wire concealed with the all material laboure etc.
209	Fire Extinguisher capacity 4.5 Kg co2
210	12.5 mm thick electric resistance rubber sheet as per BIS for LT Panels
211	Supply and fixing of exhaust fans of 18\\" size 1450rpm of GEC/equivalent make complete in all respect.
212	Desilting pump set at IntakewellSupply of Desilting pump set ,nut bolt ,rubber packing etc. LPM - 250 Head - 40
213	SITC of stater panel suitable for above pump set
214	supply of 1100 volt grade copper submersible cable 3x16mm
215	MS column pipe 100mm Dai.
216	CI/DF Sluice valve 100mm Dai
217	CI/DF Reflex valve 100mm dai
218	CI/DF Bend 100 mm dai
219	SS guide pipe of 40mm dai.
220	Dismentaling joint 100 mm
221	Pressure gauge with stop cock.
222	Installation ,testing and commissioning of pumping plant.
223	PUMPING PLANT at CWR for Zone 1Supply of Horizontal submersible pump set for clear water pump set to operate AC Supply 415 volt, 3 phase, 50Hz for pumping from WTP C.W.R.to CWR zone 1 (2W+1S). LPM - 1250, Head -40 M (Both tentative)
224	CE and UL Certified PLC/ RTU-6000, IP 54 enclosur suitable to communication with GSM based modem unit with CPU and Power supply with analog and digital parameter with battery backup suitable to run two no. pumps and one no. stand by with level sensor.
225	GSM/GPRS based wireless communication system for i RTU capable to transfer and gather data from remote sites to control stations. All accessories included with signal enhancer, antennan make for abbove ITRU.
226	Control panel with IP 54 protection, industrial grade fo rall equipment separate fo rcontrol (24v) and power equipment.
227	Intelegent Energy meter with memory RTC and 2 serial parts integrated with RTU
228	Motor operated sluice valve with actuator complete in all respect-
229	Electric motor operated sluice valve 150mmdia along with actuator for delivery pipe of pump.
230	Electric motor operated sluice valve 200mm dia along with actuator for common header.
231	Auto phase reversal unit/ automatic transformer suitable with inbuilt time delay & enclose of 100 Amp rating
232	Rador type level sensor for level measurement with RTU communication.
233	Pressure Transmitter along with manual pressure gauge.
234	Isolation transformer & surge arrestor.
235	CE/UL certifiedd 7 inch HMI touch screen suitable to communication with PLC/RTU for local display and control.
236	Security serveilliance camera IP with recorder
237	ELECTRO MAGNETIC FLOW METER
238	Provision of Electro magnetic flow meter suitable to measure the water discharge and to be fetted in common header of 200mm dia.
239	MAIN PIPING & VALVES INCLUDING COMMON HEADER :-
240	Size of Delivery of pump 150mm dia length as per site requirement
241	Size of Common header of 200mm dia. length as per site requirement
242	Supply of following
243	CI D/F Reflux Valve 150 mm dia -3 Nos.
244	CI D/F Tee 200x200x150 mm dia. -3 Nos.
245	D/F distance piece 150 mm dia. 1.00 m. long - 3 Nos.
246	D/F distance piece 200 mm dia. 1.50 m. long - 3 Nos.
247	D/F distance piece 200 mm dia. 3.00 m. long - 3 Nos.
248	Dismantling joint 150 mm dia. - 3 Nos.
249	Dismantling joint 200 mm dia for common header - 1 No.Reflex valve 200mm dia 1No.
250	Nut-bolts, bend,rubber packing (as required)
251	Any other Item required for proper installation of above pumps. - 1 Job.
252	POWER WIRING CABLE FOR INCOMING PANEL & PUMPS :-
253	Supply of 1100 volt grade 35mm2 x 3½ core/ suitable size P.V.C. Armoured Alluminium conductor cable from outgoing of transformer to L.T. incoming Panel and for power wring of pumping plant.
254	HOT crane
255	Provision of H.O.T. crane of 3 Ton capacity along with gantry girder and chainpully block and geared trolly suitable for 12 span and 12 meter clear lift complete in all respect for circular pump house, suitable for travelling length.
256	EARTHING :
257	Provision for double plate earthing for 3 nos. of electric motors, starters, panels etc. excavation of earthing pit of required size supply and burrying of 600 mm x600 mm size 3mm thick copper earth plate vertically errected for earthing with its top at least 3 meter from ground level completed with 32 mm G.1. perforated pipes and funnel for watering, laying and fetting of earthing strip, CI boxes hinged cover masonary, laying alternate layers of characoal / coak and salt at least 150 mm thick each layer complete in all respect.
258	PAINTING
259	Provision for painting of all the pumps set, main piping and valves, panels etc. installed in the pump house with three coats by enamel paint.
260	INSTALLATION OF \\" SCADA\\"
261	Installation of SCADA system, to controle the 3 set of pumping plant including testing and commissioning etc.
262	INSTALLATION AND COMMISSIONING
263	Installation of all 3 pumping plants along with L.T. panels distribution boards, switch gear control panels, starter etc laying & jointing of column pipes, delivery pipes, common header also commissiong of pumping plant.
264	Electrification for pump house and premises.
265	Electrification of pump house and campus with copper conductor wire concealed with the all material laboure etc.
266	Fire Extinguisher capasity 4.5 Kg CO2
267	12.5 mm thick electric resistance rubber sheet as per BIS for LT Panels
268	Supply and fixing of exhaust fans of 18\\" size 1450rpm of GEC/equivalent make complete in all respect.
269	PUMPING PLANT AT C.W.R. Zone-1 to OHT zone-1Supply of Horizontal submersible pump set for clear water pump set to operate AC Supply 415 volt, 3 phase, 50Hz pumping At C.W.R.Zone-1 to OHT zone-1(1W+1S). LPM - 800, Head - 35 M (Both tentative)
270	SWITCH GEAR WITH AUTO MATION OF PUMPING PLANT
271	SITC of LT panel with all required no of breakers and soft starters for motors and actuatores with suitable capacity APFC panel and other relays, multi fuction meter complete in all respect.
272	CE/UL certified PLC/RTU with redudant CPU and power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redudant CPU and power supply with analog /digital parameter and features as specified for each zps/oht to store and trasmitt data on GSM backbone , RTU/PLC designed with logic to transfer data at multiple statins as specified in tender document
273	GSM/GPRS based wireless communication system for i RTU capable to transfer and gather data from remote sites to control stations. All accessories included with signal enhancer, antennan make for abbove ITRU.
274	Control panel with IP 54 protection, industrial grade fo rall equipment separate fo rcontrol (24v) and power equipment.
275	Intelegent Energy meter with memory RTC and 2 serial parts integrated with RTU
276	Motor operated sluice valve with actuator complete in all respect-
277	Electric motor operated sluice valve 150mmdia along with actuator for delivery pipe of pump.
278	Electric motor operated sluice valve 200mm dia along with actuator for common header.
279	Auto phase reversal unit/ automatic transformer suitable with inbuilt time delay & enclose of 100 Amp rating
280	Radar type level sensor for level measurement with RTU communication.
281	Pressure Transmitter with manual pressure gauge.
282	Isolation transformer & surge arrestor.
283	CE/UL certifiedd 7 inch HMI touch screen suitable to communication with PLC/RTU for local display and control.
284	Control cabling for scada including all power and control cable for all equipment (1.5sq mm, 10cx1sq mm, 2cx1sq mm other required items for pump set.
285	Security serveilliance camera IP with recorder
286	ELECTRO MAGNETIC FLOW METER
287	Provision of Electro magnetic flow meter suitable to measure the water discharge and to be fetted in common header of 200 mm dia. having following specification
288	MAIN PIPING & VALVES INCLUDING COMMON HEADER :-
289	Size of Delivery of pump 150mm dia length as per site requirement
290	Size of Common header of 200mm dia. length as per site requirement
291	Supply of following
292	CI D/F Reflux Valve 150 mm dia -3 Nos.
293	CI D/F Tee 200x200x150 mm dia. -3 Nos.
294	D/F distance piece 150 mm dia. 1.00 m. long - 3 Nos.
295	D/F distance piece 200 mm dia. 1.50 m. long - 3 Nos.
296	D/F distance piece 200 mm dia. 3.00 m. long - 3 Nos.
297	Dismantling joint 150 mm dia. - 3 Nos.
298	Dismantling joint 200 mm dia for common header - 1 No.Reflex valve 200mm dia 1No.
299	Nut-bolts, bend,rubber packing (as required)
300	Any other Item required for proper installation of above pumps. - 1 Job.
301	POWER WIRING CABLE FOR INCOMING PANEL & PUMPS :-
302	Supply and laying of 1100 volt grade 25.mm2 x 3½ core/ suitable size P.V.C. Armoured Alluminium conductor cable from outgoing of transformer to L.T. incoming Panel and for power wring of pumping plant.
303	EARTHING :
304	Provision for double plate earthing for 2 nos. of electric motors, starters, panels etc. excavation of earthing pit of required size supply and burrying of 600 mm x600 mm size 3mm thick copper earth plate vertically errected for earthing with its top at least 3 meter from ground level completed with 32 mm G.1. perforated pipes and funnel for watering, laying and fetting of earthing strip, CI boxes hinged cover masonary, laying alternate layers of characoal / coak and salt at least 150 mm thick each layer complete in all respect.
305	PAINTING
306	Provision for painting of all the pumps set, main piping and valves, panels etc. installed in the pump house with three coats by enamel paint.
307	INSTALLATION OF \\" SCADA\\"
308	Installation of SCADA system, to controle the 4 set of pumping plant including testing and commissioning etc.
309	INSTALLATION AND COMMISSIONING
310	Installation of all 2 pumping plants along with L.T. panels distribution boards, switch gear control panels, starter etc laying & jointing of column pipes, delivery pipes, common header also commissiong of pumping plant.
311	PUMPING PLANT CWR zone-1 to OHT Zone-2.Supply of submersible pump set for clear water pump set to operate AC Supply 415 volt, 3 phase, 50Hz for pumping Plant At CWR zone-1 to OHT Zone-2. ( 1 W+ 1 S). LPM - 650, Head - 35 M (Both tentative)
312	SWITCH GEAR WITH AUTO MATION OF PUMPING PLANT
313	SITC of LT panel with all required no of breakers and soft starters for motors and actuatores with suitable capacity APFC panel and other relays, multi fuction meter complete in all respect.
314	CE/UL certified PLC/RTU with redudant CPU and power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redudant CPU and power supply with analog /digital parameter and features as specified for each zps/oht to store and trasmitt data on GSM backbone , RTU/PLC designed with logic to transfer data at multiple statins as specified in tender document
315	GSM/GPRS based wireless communication system for iRTU capable to transfer and gather data from remote sites to control stations. All accessories included with signal enhancer, antenan for above iRTU.
316	Control panel with IP 54 protection, industrial grade fo rall equipment separate fo rcontrol (24v) and power equipment.
317	Motor operated sluice valve with actuator complete in all respect-
318	Electric motor operated sluice valve 150mmdia along with actuator for delivery pipe of pump.
319	Electric motor operated sluice valve 200mm dia along with actuator for common header.
320	Auto phase reversal unit/ automatic transformer suitable with inbuilt time delay & enclose of 100 Amp rating
321	Radar type level sensor for level measurement with RTU communication.
322	Pressure Transmitter with manual pressure gauge.
323	Isolation transformer & surge arrestor.
324	CE/UL certifiedd 7 inch HMI touch screen suitable to communication with PLC/RTU for local display and control.
325	Control cabling for Scada including all power and control cable for all equipment (1.5sq mm, 10cx1sq mm, 2cx1sq mm other required items for pump set.
326	Security serveilliance camera IP with recorder
327	ELECTRO MAGNETIC FLOW METER
328	Provision of Electro magnetic flow meter suitable to measure the water discharge and to be fetted in common header of 200mm dia. having following specification
329	MAIN PIPING & VALVES INCLUDING COMMON HEADER :-
330	Size of Delivery of pump 150mm dia length as per site requirement
331	Size of Common header of 200mm dia. length as per site requirement
332	Supply of following
333	CI D/F Reflux Valve 150 mm dia -3 Nos.
334	CI D/F Tee 200x200x150 mm dia. -3 Nos.
335	D/F distance piece 150 mm dia. 1.00 m. long - 3 Nos.
336	D/F distance piece 200 mm dia. 1.50 m. long - 3 Nos.
337	D/F distance piece 200 mm dia. 3.00 m. long - 3 Nos.
338	Dismantling joint 150 mm dia. - 3 Nos.
339	Dismantling joint 200 mm dia for common header - 1 No.Reflex valve 200mm dia 1No.
340	Nut-bolts, bend,rubber packing (as required)
341	Any other Item required for proper installation of above pumps. - 1 Job.
342	POWER WIRING CABLE FOR INCOMING PANEL & PUMPS :-
343	Supply and laying of 1100 volt grade 25mm2 x 3½ core /suitable size P.V.C. Armoured Alluminium conductor cable from outgoing of transformer to L.T. incoming Panel and for power wring of pumping plant and also for power wiring of 2nos. Pump set.
344	EARTHING :
345	Provision for double plate earthing fo2 nos. of electric motors, starters, panels etc. excavation of earthing pit of required size supply and burrying of 600 mm x600 mm size 3mm thick copper earth plate vertically errected for earthing with its top at least 3 meter from ground level completed with 32 mm G.1. perforated pipes and funnel for watering, laying and fetting of earthing strip, CI boxes hinged cover masonary, laying alternate layers of characoal / coak and salt at least 150 mm thick each layer complete in all respect.
346	Electrification for pump house and premises.
347	Electrification of pump house and campus with copper conductor wire concealed with the all material.
348	Supply and fixing of exhaust fans of 18\\" size 1450rpm of GEC/equivalent make complete in all respect.
349	PAINTING
350	Provision for painting of all the pumps set, main piping and valves, panels etc. installed in the pump house with three coats by enamel paint.
351	INSTALLATION AND COMMISSIONING
352	Installation of all 2 pumping plants along with L.T. panels distribution boards, switch gear control panels, starter etc laying & jointing of column pipes, delivery pipes, common header also commissiong of pumping plant.
353	PUMPING PLANT CWR zone-1 to OHT Zone-3Supply of submersible pump set for clear water pump set to operate AC Supply 415 volt, 3 phase, 50Hz for pumping Plant At CWR zone-1 to OHT Zone-3. ( 1 W+ 1 S). LPM - 600, Head - 35 M (Both tentative)
354	SITC of LT panel with all required no of breakers and soft starters for motors and actuatores with suitable capacity APFC panel and other relays, multi fuction meter complete in all respect.
355	CE/UL certified PLC/RTU with redudant CPU and power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redudant CPU and power supply with analog /digital parameter and features as specified for each zps/oht to store and trasmitt data on GSM backbone , RTU/PLC designed with logic to transfer data at multiple statins as specified in tender document
356	GSM/GPRS based wireless communication system for iRTU capable to transfer and gather data from remote sites to control stations. All accessories included with signal enhancer, antenan for above iRTU.
357	Control panel with IP 54 protection, industrial grade fo rall equipment separate fo rcontrol (24v) and power equipment.
358	Motor operated sluice valve with actuator complete in all respect-
359	Electric motor operated sluice valve 150mmdia along with actuator for delivery pipe of pump.
360	Electric motor operated sluice valve 200mm dia along with actuator for common header.
361	Auto phase reversal unit/ automatic transformer suitable with inbuilt time delay & enclose of 100 Amp rating
362	Rador type level sensor for level measurement with RTU communication.
363	Pressure Transmitter with manual pressure gauge.
364	Isolation transformer & surge arrestor.
365	CE/UL certified 7 inch HMI touch screen suitable to communication with PLC/RTU for local display and control.
366	Control cabling for Scada including all power and control cable for all equipment (1.5sq mm, 10cx1sq mm, 2cx1sq mm other required items for pump set.
367	Security serveilliance camera IP with recorder
368	ELECTRO MAGNETIC FLOW METER
369	Provision of Electro magnetic flow meter suitable to measure the water and to be fetted in common header of 200mm dia. having following specification
370	MAIN PIPING & VALVES INCLUDING COMMON HEADER :-
371	Size of Delivery of pump 150mm dia length as per site requirement
372	Size of Common header of 200mm dia. length as per site requirement
373	Supply of following
374	CI D/F Reflux Valve 150 mm dia -3 Nos.
375	CI D/F Tee 200x200x150 mm dia. -3 Nos.
376	D/F distance piece 150 mm dia. 1.00 m. long - 3 Nos.
377	D/F distance piece 200 mm dia. 1.50 m. long - 3 Nos.
378	D/F distance piece 200 mm dia. 3.00 m. long - 3 Nos.
379	Dismantling joint 150 mm dia. - 3 Nos.
380	Dismantling joint 200 mm dia for common header - 1 No.Reflex valve 200mm dia 1No.
381	Nut-bolts, bend,rubber packing (as required)
382	Any other Item required for proper installation of above pumps. - 1 Job.
383	Provision for painting of all the pumps set, main piping and valves, panels etc. installed in the pump house with three coats by enamel paint.
384	INSTALLATION AND COMMISSIONING
385	Installation of all 2 pumping plants along with L.T. panels distribution boards, switch gear control panels, starter etc laying & jointing of column pipes, delivery pipes, common header also commissiong of pumping plant.
386	PUMPING PLANT CWR zone-1 to OHT Zone-4 Supply of submersible pump set for clear water pump set to operate AC Supply 415 volt, 3 phase, 50Hz for pumping Plant At CWR zone-1 to OHT Zone-4 ( 1 W+ 1 S). ,LPM - 450, Head - 35 M (Both tentative)
387	SITC of LT panel with all required no of breakers and soft starters for motors and actuatores with suitable capacity APFC panel and other relays, multi fuction meter complete in all respect.
388	CE/UL certified PLC/RTU with redudant CPU and power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redudant CPU and power supply with analog /digital parameter and features as specified for each zps/oht to store and trasmitt data on GSM backbone , RTU/PLC designed with logic to transfer data at multiple statins as specified in tender document
389	GSM/GPRS based wireless communication system for iRTU capable to transfer and gather data from remote sites to control stations. All accessories included with signal enhancer, antenan for above iRTU.
390	Control panel with IP 54 protection, industrial grade fo rall equipment separate fo rcontrol (24v) and power equipment.
391	Motor operated sluice valve with actuator complete in all respect-
392	Electric motor operated sluice valve 100mm dia along with actuator for delivery pipe of pump.
393	Electric motor operated sluice valve 150mm dia along with actuator for common header.
394	Pressure Transmitter with manual pressure gauge.
395	Rador type level sensor for level measurement with RTU communication.
396	ELECTRO MAGNETIC FLOW METER
397	Provision of Electro magnetic flow meter suitable to meassure the discharge and to be fitted in common header of 150 mm dia having following specification complete in all respect.
398	MAIN PIPING & VALVES INCLUDING COMMON HEADER :-
399	Size of Delivery of pump 100mm dia .Lenght 6.0 Mtr. for each pump.
400	Size of Common header of 150mm dia., length as per site requirement
401	Supply of following
402	CI D/F Reflux Valve 100 mm dia - 2 Nos.
403	CI D/F tee 150x150x100 mm dia. - 2 Nos.
404	D/F distance piece 100 mm dia. 1.00 m. long - 2 Nos.
405	D/F distance piece 150 mm dia. 1.50 m. long - 2 Nos.
406	D/F distance piece 150 mm dia. 3.00 m. long - 2 Nos.
407	Dismantling joint 100 mm dia. - 1 Nos.
408	Dismantling joint 150 mm dia. - 1 No.Reflex valve 150mm dia 1No.for common header
409	Nut-bolts, bend,rubber packing ( as required)
410	Any other Item required for proper installation of above pumps. - 1 Job.
411	POWER WIRING CABLE FOR INCOMING PANEL & PUMPS :-
412	Supply and laying of 1100 volt grade 25mm2 x 3½ core /suitable size P.V.C. Armoured Alluminium conductor cable from outgoing of transformer to L.T. incoming Panel and for power wring of pumping plant and also for power wiring of 2nos. Pump set.
413	EARTHING :
414	Provision for double plate earthing fo2 nos. of electric motors, starters, panels etc. excavation of earthing pit of required size supply and burrying of 600 mm x600 mm size 3mm thick copper earth plate vertically errected for earthing with its top at least 3 meter from ground level completed with 32 mm G.1. perforated pipes and funnel for watering, laying and fetting of earthing strip, CI boxes hinged cover masonary, laying alternate layers of characoal / coak and salt at least 150 mm thick each layer complete in all respect.
415	PAINTING
416	Provision for painting of all the pumps set, main piping and valves, panels etc. installed in the pump house with three coats by enamel paint.
417	INSTALLATION AND COMMISSIONING
418	Installation of all 2 pumping plants along with L.T. panels distribution boards, switch gear control panels, starter etc laying & jointing of column pipes, delivery pipes, common header also commissiong of pumping plant.
419	Electrification for pump house and premises.
420	Electrification of pump house and campus with copper conductor wire concealed with the all material laboure etc.
421	Fire Extinguisher capasity 4.5 Kg co2
422	12.5 mm thick electric resistance rubber sheet as per BIS for LT Panels
423	Supply and fixing of exhaust fans of 18\\" size 1450rpm of GEC/equivalent make complete in all respect.
424	Trail Run of all E&M equipments installed at water supply scheme included trail run period upto handover of the scheme to concerning ULB with Electricity, Chlorine & Operation charges durring trail run period.
425	OHT Zone -1
426	Motor operated Actuators with sluice valve of suitable dia.
427	SITC of plunger type Flow control Valve of suitable dia.
428	CE & UL certified Radar type level transmitter for OHT
429	CE/UL Certified pressure Transmitter with pressure gauge at OHT
430	CE/UL Certified pressure Transmitter with pressure gauge in DMA network
431	SITC of CE & UL certified Electomagnetic Flowmeter for OHT line.
432	SITC of Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system .
433	SITC of SCADA Compatible Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-10 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system.
434	Complete cabling of all equipment at OHT including power and control cable.
435	Installation ,commissioning and testing .
436	OHT Zone -2
437	CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations
438	G.S.M./G.P.R.S. based wireless communication with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant
439	Motor operated Actuators with sluice valve of suitable dia.
440	SITC of plunger type Flow control Valve of suitable dia.
441	CE & UL certified Radar type level transmitter for OHT
442	CE/UL Certified pressure Transmitter with pressure gauge at OHT
443	CE/UL Certified pressure Transmitter with pressure gauge at DMA
444	SITC of CE & UL certified Electomagnetic Flowmeter for OHT line size of suitable dia. .
445	SITC of Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system .
446	SITC of SCADA Compatible Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-10 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system.
447	Coplete cabling of all equipment at OHT including power and control cable.
448	Installation ,commissioning and testing .
449	OHT Zone -3
450	CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations
451	G.S.M./G.P.R.S. based wireless communication with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant
452	Motor operated Actuators with sluice valve of suitable dia.
453	SITC of plunger type Flow control Valve of suitable dia.
454	CE & UL certified Radar type level transmitter for OHT
455	CE/UL Certified pressure Transmitter with pressure gauge OHT
456	CE/UL Certified pressure Transmitter with pressure gauge DMA network
457	SITC of CE & UL certified Electomagnetic Flowmeter for OHT line size of suitable dia.
458	SITC of Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system .
459	SITC of SCADA Compatible Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-10 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system.
460	Coplete cabling of all equipment at OHT including power and control cable.
461	Installation ,commissioning and testing .
462	OHT Zone -4
463	CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations
464	G.S.M./G.P.R.S. based wireless communication with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant
465	Motor operated Actuators with sluice valve of suitable dia.
466	SITC of plunger type Flow control Valve of suitable dia.
467	CE & UL certified Radar type level transmitter for OHT
468	CE/UL Certified pressure Transmitter and pressure gauge at OHT
469	CE/UL Certified pressure Transmitter with pressure gauge at DMA network
470	SITC of CE & UL certified Electomagnetic Flowmeter for OHT line size of suitable dia.
471	SITC of Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system .
472	SITC of SCADA Compatible Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-10 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system.
473	Coplete cabling of all equipment at OHT including power and control cable.
474	Installation ,commissioning and testing .
475	DG SET at Intakewell
476	Provision for supply Installation,Testing and commissioning of salient type of suitable capacity DG set with control panel and separate AMF panel as per C.P.C.B. IV Latest guide line powered with complete in all respect as per tender document
477	Power cable of suitable size of 1100 volts grade 3½ core Alluminium armoured PVC seathed
478	DG SET at Main CWR located at wtp
479	Provision for supply Installation,Testing and commissioning of salient type of suitable capacity DG set with control panel and separate AMF panel as per C.P.C.B. IV Latest guide line powered with complete in all respect as per tender document
480	Power cable of suitable size of 1100 volts grade 3½ core Alluminium armoured PVC seathed
481	DG SET at Zone -1 CWR
482	Provision for supply Installation,Testing and commissioning of salient type of suitable capacity DG set with control panel and separate AMF panel as per C.P.C.B. IV Latest guide line powered with complete in all respect as per tender document
483	Power cable of suitable size of 1100 volts grade 3½ core Alluminium armoured PVC seathed
484	SUBSTATION at Intakewell
485	HT Control Panel
486	2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control panel comprising with incomming VCB panel 1 nos and outgoing VCB panel 2 Nos of 11 KV/800 Amp. 3 Phase 3 wire 50 Hz. .
487	Provision for oil immersed natural air cooled step down transformer suitable for out door installation of 160 KVA or above as per requirement of site, 11/0.4KV and as per I:S 2020/1972 with all accessories. The transformer should be provided with off load tap changer ± 7.5% voltage varialtion on L.T. side. These tapping should be connected by and externally separated tap changing switch. The temp side in oil by thermometer should not exceed 50oC and of winding by measuring resistance should not exceed 55oC over an ambient of 45oC maximum. The transformer should have cable box on HT/LT side for termination of cables.
488	Main L.T. Panel
489	2mm thick M.S. sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control panel comprising of following items.
490	Incoming Panel
491	Reputed make cubical floor mounting extensible type panel complete with T.P. air insulated aluminum Bus bar of required capacity with neutral of reduced section, system voltage 415/440 volts 3 phase 4 wire 50 Hz indoor installation type and comprising of required nos suitable capacity breaker for incoming of transformer and D.G. set & required no of outgoing breakers for motors, lighting and other electrical equipments with minimum two nos of spare breakers, required nos of soft starter for motors and required capacity APFC panel housed in sheet steel cubical panel fitted with all accessories as per tender document. breaking capacity of all breakers should be as per IE rules and best engineering design. LT panel should comprise of required relays, multi function meter etc complete in all respect.
492	Bus coupler
493	Bus coupler complete with internal wiring aluminium bus bar comprising of all accessories as per tender document
494	Load Distribution Panel
495	Floor mounting extensible type with common aluminium bus bar of 1000 Amp. arrangement comprising of M.C.C.B./M.C.B. suitable C.Ts operated ampere meter, On/Off indicator selector switch and internal wiring etc. complete including Ampere meter, Volt meter, frequency meter, P.F. meter, capacitor, single phasing preventer, Selector switch, fuses etc. with suitable size of MCCB as per requirement of load at site.
496	Supply of 11 KV XLPE cable 3 x 70mm sq. / suitable size
497	Supply of 3.50 core suitable size aluminium PVC cable 1100 V grade.
498	Supply of Jointing cable
499	i) HT Indoor joint
500	ii) HT outdoor joint

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Water Storage and Supply Tenders

Water Supply Project Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Augmentation Of Dudhi Nagar Panchayat Water Supply Scheme Dist. Sonbhadraunder Amrut 2.0 Programme, Dudhi-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Augmentation Of Dudhi Nagar Panchayat Water Supply Scheme Dist. Sonbhadraunder Amrut 2.0 Programme, Dudhi-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us