|
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework and precast concrete articles and precast concrete block wallingetc, complete all as specified and as directed by Engineer in charge. |
| 2 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, completeType C1 1:3:6 (20mm graded aggregate)Set in cement mortar 1:6 etc, complete all as specified and as directed by Engineer in charge. |
| 3 | Taking up or down 15/20mm bore steel tubing and connections, including cleaning for refixing or removal to storeetc, complete all as specified and as directed by Engineer in charge. |
| 4 | M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 20 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and as directed by Engineer in charge. |
| 5 | M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 25 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and as directed by Engineer in charge. |
| 6 | S & F PP-R gate valves 25 mm outer dia of pipe (brass insert) as per site requirement etc, complete all as specified and as directed by Engineer in charge. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc, complete all as specified and as directed by Engineer in charge. |
| 8 | M&L Non - skid Ceramic coloured tiles of size 400 x 400 x7 to 8 mm thick (square/ rectangular) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including Screed bed or bedding layer of mortar 15 mm 1:6 thick for laying floor finishes etc, complete all as specified and as directed by Engineer in charge. |
| 9 | M&L Glazed ceramic colured tiles in size 450 x 300x 7 to 8 mm thick vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster 1:6 on fair faces of brick work or concrete surfaces etc, complete all as specified and as directed by Engineer in charge. |
| 10 | M&L for cement concrete Type B-2 1:2:4, using 20 mm graded stone aggregate ,as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed etc, complete all as specified and as directed by Engineer n Charge |
| 11 | Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed by Engineer in charge. |
| 12 | M&L Rendering 15 mm thick Cement plaster 1:6 on fair faces of brick work or concrete sur faces rendering is to be finished even and smooth (without using extra lime or cement) etc, complete all as specified and as directed by Engineer in charge. |
| 13 | M&L Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete sur faces finished even and smooth (without using extra lime or cement), complete all as specified and directed by Engr-in-charge. |
| 14 | M&L Preparation of new plastered surfaces of walls and applying two coat of oil bound distemper white or tinted on walls over a coat of primer etc, complete all as specified and as directed by Engineer-in-Charge. |
| 15 | M & L for preparation of new plastered surface of wall and applying by finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) , complete all as specified and directed by Engr-in-charge. |
| 16 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) , complete all as specified and directed by Engr-in-charge. |
| 17 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) , complete all as specified and directed by Engr-in-charge. |
| 18 | M&L Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed by Engr-in-charge. |
| 19 | M&L Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings etc, complete all as specified and as directed by Engeer in charge |
| 20 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engr-in-charge. |
| 21 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by Engr-in-charge. |
| 22 | S&F100 mm Aluminium anodised,barrel tower bolts of ex truded section and fixed complete all as specified and as directed by Engr-in-charge. |
| 23 | S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engr-in-charge. |
| 24 | S&F 150mm Aluminium handles, cast type, anodised etc, complete all as specified and as directed by Engeer in charge |
| 25 | S&F 4.8 mm frosted Sheet glass,ordinary quality and glazing in square n exc 0.5 sq. m in each pane etc, complete all as specified and as directed by Engeer in charge |
| 26 | Taking down shutters exc 1Sqm and n exc 2 sqm Each complete all as specified and as directed. |
| 27 | Dismantling drain pipe of any description and laid in any position etc, complete all as specified and as directed by Engr in charge |
| 28 | S & F in repair 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete. |
| 29 | S & F in repair 75 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete. |
| 30 | Supply and fixing in repair 110mm PVC (SWR) bends of any radius complete. |
| 31 | Supply and fixing in repair 75mm PVC (SWR) bends of any radius complete. |
| 32 | Supply and fixing in repair 110mm PVC (SWR) junction single T equal or unequal with acccessible door complete. |
| 33 | Supply and fixing in repair 110mm PVC (SWR) vent cowl complete. |
| 34 | Supply and fixing in repair 75mm PVC (SWR) vent cowl complete. |
| 35 | S&F 75mm PVC(SWR) floor trap plain with grating including jointing to waste pipe fixed complete all as specified and as directed by Engeer in charge |
| 36 | S&F 150 x 100 mm dia SW Gully trap setting and jointing with cement mortar 1:1 etc, complete all as specified and as directed by Engeer in charge |
| 37 | S&F Rotational moulded polythene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltr capacity incl dismantling water tanks and removing to store etc, complete all as specified and as directed by Engeer in charge |
| 38 | S&F in repair Bib taps,15 mm bore fancy type cast copper alloy Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc, complete all as specified and as directed by Engeer in charge |
| 39 | S&F in repair Pillar taps,15 mm bore fancy type cast copper alloy, with capstan heads,chromium plated ,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc, complete all as specified and as directed by Engeer in charge |
| 40 | S&F in repair Stop valves / angle valve, 15 mm bore fancy type chromium plated cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc, complete all as specified and as directed by Engeer in charge |
| 41 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-Charge. |
| 42 | Brass chromium plated shower rose 125mm fixed in repair etc, complete all as specified and as directed by Engeer in charge |
| 43 | S&F Fancy type Premium quality Chromium plated Toilet paper holder fixed in repairs with flat recessed type stainless steel etc, complete all as specified and as directed by Engeer in charge Note :- Design as approved by GE |
| 44 | S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in positionetc, complete all as specified and as directed by Engeer in chargeNote :- Design as approved by GE |
| 45 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe with and including 32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including all CI fittings wherever required etc, complete all as specified and as directed by Engeer in charge |
| 46 | S&F in repairs Vitreous China coloured squatting pan, ‘Orissa’pattern, size 580 x 440 mm with integral foot rests including all connection ,flushing pipe, anti-syphonage pipe, including other CI fittings wherever required etc.,complete including making good to floor etc, complete all as specified and as directed by Engeer in chargeNote: Qty and Rates are inclusive of CI P and S trap. |
| 47 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, including plastic seat cover and including other CI fittings wherever required etc, complete all as specified and as directed by Engr-in-Charge.Note: Qty and Rates are inclusive of CI P and S trap. |
| 48 | Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings etc all as specified in Particular specifications. |
| 49 | S&F in repair 10 Litres cap PVC valveless , syphonic action type ,flushing cistern ,low/high level, white, with inlet, ball valve, float and handle including flush pipe and bracket etc, complete all as specified and as directed by Engr-in-charge. |
| 50 | S&F in Repairs PVC framed mirror of size 450 x 600 x 5mm thick of selected quality glass fixed to wall complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repair etc, complete all as specified and as directed by Engeer in charge |
| 52 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, etc, complete all as specified and as directed by Engr-in-Charge. |
| 53 | S&F in repairs fancy type Premium quality Chromium plated Soap Dish Square or Rectangular etc, complete all as specified and as directed by Engeer in charge.Note for all items mentioned here in before : It is informed that the material incorporated in this work shall be purchased by contractor before starting of work at site as per make approved by GE. At least 75% of total material will be deposited to the custody of Engineer-in-charge and will be opened at the presence of Engineer-in-charge or the rap of EIC. This aspect shall be monitored by EIC. The purchase voucher of the same shall be kept on record duly defaced. |
| 54 | Deduct Schedule of credit (Schedule attached with tender docus) Please Enable Macros to View BoQ information |
