|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 2 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 3 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 4 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 5 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 6 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality .conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 7 | 12 mm cement plaster of mix : |
| 8 | 1:4 (1 cement: 4 fine sand) |
| 9 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall |
| 10 | 20 mm dia nominal bore |
| 11 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 12 | 20 mm nominal bore |
| 13 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 14 | 30 cm length |
| 15 | 15 mm nominal bore |
| 16 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 17 | 20 mm nominal bore |
| 18 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 19 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 20 | 15 mm nominal bore |
| 21 | Cutting holes up to 30x30 cm in walls including making good the same |
| 22 | With common burnt clay F.P.S. (non modular) brick |
| 23 | Providing and Fixing of drinking water cooler with storage capacity 400 ltr. (+/- 10%) have cooling cap 150 to 225 LPH. Full body stainless steel including storage tank SS grade refrigerant R-134A/R-32 complete in all respect conforming to IS 1475 Part-1 with upto dated amendments. Make:- Blue Star/Sidwal/Voltas/Climatrol. |
| 24 | Providing and Fixing of Voltage Stabilizers with Nominal output-230 Volts±10% complete in all respects Make Deol or Jewel, Volts, V-guard. |
| 25 | 5 KVA capcity |
| 26 | P/F of Hi Flow water Filter-cum-Purifier including installation charges 3 Ltr/Minute. Make Aqua guardrd/Kent/Usha/Pure-it. Please Enable Macros to View BoQ information |
