|
| 1 | Replacement of following u/s parts of \\"Almirah large steel with shelves\\" with suitable new parts of existing shape & size complete to match the original as per drg and directed by Engr-In Charge. (FD-67, 1031) at site. |
| 2 | S&F New lock of 6 lever with duplicate key of approved quality. |
| 3 | S&F new shelves made out of 1.00 mm thick CRCA sheet fixed with welding/riveted. |
| 4 | S&F new handle of 110 mm Stainless Steel heavy components with nut and bolt as approved by GE. |
| 5 | S&F new hinges (75mm). |
| 6 | S&F new legs made out of 1mm thick CRCA sheet fixed with welding/riveted. |
| 7 | S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel. |
| 8 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 9 | Replacement of following u/s parts of \\"Almirah med steel with shelves\\" with suitable new parts of existing shape & size complete to match the original as per drg and directed by Engr-In Charge. (FD-243, 1032) at site. |
| 10 | S&F New lock of 6 lever with duplicate key of approved quality. |
| 11 | S&F new shelves made out of 1.00 mm thick CRCA sheet fixed with welding/riveted. |
| 12 | S&F new handle of 110 mm Stainless Steel heavy components with nut and bolt as approved by GE. |
| 13 | S&F new hinges (75mm). |
| 14 | S&F new legs made out of 1mm thick CRCA sheet fixed with welding/riveted. |
| 15 | S&F new locking device with plunger rod of suitable pattern to the locking system of Almirah steel. |
| 16 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 17 | Repair and Re canning of \\"Chair Verandah\\" as per existing shape & size complete to match the original as per drg and all directed by Engr-In-Charge. (FD-256 ) at site. |
| 18 | Re-canning of chair verandah with 4/5mm wide and half round superior quality white plastic cane |
| 19 | Removing the existing unserviceable cane plastic / newar from the chair verandah supply and fixing PVC seat & Back 4mm thick in lieu of cane/newar after providing two additional stiffener at centre of seat & back with 25x5 mm flat Iron welded with centre of the frame duly white painted for support of PVC Seat & Back. Due care shall be taken while fixing the PVC Seat & Back, The PVC Seat & Back shall get approved from BSO before supply. |
| 20 | Two or more coats of white synthetic enamel paint on entire steel/iron frame with high class finishing including necessary scrapping and smoothness of surface. |
| 21 | Tuck welding to broken legs and frames of chair verandah |
| 22 | S&F of new PVC shoes 20mm dia at bottom of legs as approved by Engr-in-Charge. |
| 23 | Replacement of following u/s parts of \\"Chairs steel tubular with arms / without arms\\" with suitable new parts shown on drg and all as directed by Engr-In-Charge (FD-75 M) at site. |
| 24 | S & F of suitable size new synthetic foam of 75mm thick with 32 density for seat duly coverd with synthteic tepastry/leatheratte raxine of approved shade and quality fitted on 12 mm BWR Plywoood in lieu of old Seat frame of Chair steel tubular with/ without Hnadle fixed with screws 4 Nos and nuts to the chair frame alongwith MS flat (whereever required)complete all as per drawing. including dismantling unservicable one all as specified and as directed. |
| 25 | S & F of suitable size new synthetic foam of 75mm thick with 32 density for Back duly coverd with synthteic tepastry/leatheratte raxine of approved shade and quality fitted on 12 mm BWR Plywoood in lieu of old back frame of Chair steel tubular with/ without Handle fixed with screws 4 Nos and nuts to the chair frame alongwith MS flat (whereever required)complete all as per drawing. including dismantling unservicable one all as specified and as directed. |
| 26 | S&F 02 +01 Nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat and Back. Complete all as specified and all as directed by Engr-in- Charge. |
| 27 | Supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers and screws to fix two flats placed beneath the seat complete all as specified and all as directed by Engr-in- Charge. |
| 28 | Supply and fixing new Back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers and screws to fix two flats placed beneath the Back complete all as specified and all as directed by Engr-in- Charge. |
| 29 | S & F Handle made of Teak wood duly painted with two coats of synthetic enamel paint of approved shade and quality and fixed to the chair tubular with arms with screws of suitable size complete all as per drawing including dismantling unservicable one all as specified and as directed. |
| 30 | S & F MS Flat size 40 x 25 x 4mm thick welded/Screwed at four corner at bottom of the seat only to support and screwed with the seat at two places complete all as per drawing. including dismantling unservicable one all as specified and as directed. |
| 31 | S&F new PVC bushes to the bottom |
| 32 | S&F new PVC caps on the top. |
| 33 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 34 | Replacement of following U/S parts of \\"Charpoy Hard Top MAP\\" with suitable new parts of existing shape & size complete as per drg and directed by Engr-In-Charge FD/MAP/-II/01 at site. |
| 35 | S&F new 12mm thick BWR phenol bonded commercial ply of size 1980x900mm , fitted with suitable nut & bolt. |
| 36 | S&F suitable new hard Rubber Shoes. |
| 37 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 38 | Repair/Replacement of following u/s parts of \\"Charpoy GI Pipe\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. ( Drg No FD-220) at site. |
| 39 | S & F in repairs long rail made of 32 mm dia GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm dia GI elbow ISI marked heavy duty of charpoy. Note : u/s long rails be converted into 01 short rail & 01 leg & measured in Sch No. 10.2 & 10.03. all as specified and all as directed by Engr-in- Charge. |
| 40 | Re-fixing of short rail retrieved from item No 10.01 duly threaded at both end upto 45mm. Note: u/s short rails be converted into 01 leg and measured in Sch 10.3 |
| 41 | Re-fixing of legs retrieved from item No 10.01 & 10.02 duly threaded at one end upto 45mm. |
| 42 | S & F in repairs 3 way 32 mm dia GI elbow ISI heavy duty marked complete as per specified. |
| 43 | S & F in repairs check nuts of 32 mm dia ISI marked complete as per specified. |
| 44 | S&F suitable new 12mm thick BWR phenol bonded commercial ply of size 1980x900mm, fixed with flat/dome head MS galvanished iron carriage bolts. The edge of plywood shall be smoothened alround & corner shall be rounded to a radious of 1cm iron carriage, 08 Nos of round headed bolts with nut & washer of size 5x75mm after drilling the holes at equal distance on rails (02Nos on each long rail & 02Nos on each short Rails) |
| 45 | S&F new MS flat of size 900x25x5mm with two Nos nut & bolts as stiffner shall be fitted on long rail for support of plywood. |
| 46 | S&F new MS flat of size 50x25x5mm with two Nos nut & bolts as stiffner shall be fitted on short rail for support of plywood. |
| 47 | S&F new MS flat Clip of size 60x25x5mm in round dia for holding/support of FMN Set shall be welded on upper side and lower side of leg of charpoy all as specified and shown on drg and directed by Engr-In-Charge. |
| 48 | Replacement of following u/s parts of \\"Locker Bed Side Steel \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD-1029, FD-257) at site. |
| 49 | S&F new Hasp and Staple of 100 mm size Stainless Steel Heavy components for Locker steel as specified and as directed. |
| 50 | S&F new Stainless Steel handles complete with nut and bolt. |
| 51 | S&F new mid weight hinges through gas welding. |
| 52 | S&F new shelves made out of 1.00 mm thick MS sheet fixed and welded/riveted where required. |
| 53 | S&F new legs made out of 1.00mm thick MS sheet fixed and welded where required. |
| 54 | S&F new SS 20 mm dia hanging rod. |
| 55 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 56 | Repair/Replacement of following u/s parts of \\"Table office clerk steel\\" with suitable new parts of existing shape & size complete to match the original as per drg and directed by Engr-In-Charge.(FD-84/,1004 ) at site. |
| 57 | S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated including 0.8mm thick pvc edge-banding with auto-lipped through-feed. |
| 58 | S&F New lock of 4lever with duplicate key of approved quality. |
| 59 | Relacement of u/s drawer with new drawer as shown on drg and directed by Engr-In-Charge. |
| 60 | Repair of drawer and shutter including removal of dents/bends & welding and required smooth movement of drawer all as specified and shown on drg and directed by Engr-In-Charge. |
| 61 | S&F new Leg/Rail/Sttiffener of Table as shown on drg and directed by Engr-in-Charge |
| 62 | S&F of PVC shoes |
| 63 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 64 | Repair/Replacement of following u/s parts of \\"Table office officers steel\\" with suitable new parts of existing shape & size complete to match the original as per drg and directed by Engr-In-Charge. (FD-84/1003 ) at site. |
| 65 | S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed. |
| 66 | S&F New lock of 4lever with duplicate key of approved quality. |
| 67 | Relacement of u/s drawer with new drawer as shown on drg and directed by Engr-In-Charge. |
| 68 | Repair of drawer and shutter including removal of dents/bends & welding and required smooth movement of drawer all as specified and shown on drg and directed by Engr-In-Charge. |
| 69 | S&F new Leg/Rail/Sttiffener of Table as shown on drg and directed by Engr-in-Charge |
| 70 | S&F of PVC shoes |
| 71 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 72 | Repair/Replacement of following u/s parts of \\" Table Steel 900x900x760mm \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. (FD-1009) at site. |
| 73 | S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick PVC edge-banding with auto-lipped through-feed. |
| 74 | S&F new Leg/Rail/Sttiffener of Table as shown on drg and directed by Engr-in-Charge |
| 75 | M&L for Rubber shoes |
| 76 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 77 | Repair/Replacement of following u/s parts of \\" Table 3'x2' Steel with/without drawar \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. (FD-1007,1008) at site. |
| 78 | S&F new top of 18mm thick MDF board of exterior grade including 0.8mm thick PVC edge-banding with auto-lipped through-feed. |
| 79 | Relacement of u/s drawer with new drawer as shown on drg and directed by Engr-In-Charge. |
| 80 | S&F New lock of 4lever with duplicate key of approved quality. |
| 81 | M&L for Rubber shoes |
| 82 | S&F new Leg/Rail/Sttiffener of Table as shown on drg and directed by Engr-in-Charge |
| 83 | Repair of drawer and shutter including removal of dents/bends & welding and required smooth movement of drawer all as specified and shown on drg and directed by Engr-In-Charge. |
| 84 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 85 | Replacement of following u/s parts of \\" Chair School with hand board \\" with suitable new parts of existing shape & size complete to match the original as shown on drg at site and all directed by Engr-In-Charge. (FD/E6/MAP/05) at site. |
| 86 | S&F new Hand board top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed. |
| 87 | S&F new One piece PVC back & seat of superior quality as approved by GE. |
| 88 | S&F of new PVC Shoe. |
| 89 | Repair and Replacement of M S Cleat for lifting of Hand board from bottom to top and as shown on drg and directed by Engr-in-Charge |
| 90 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 91 | Repair/Replacement of following u/s parts of \\"Table Dining OR\\" with suitable new parts of existing shape & size complete to match the original as shown on drg at site and all directed by Engr-In-Charge. (FD-165) at site |
| 92 | S&F new top of 18mm thick MDF board of exterior grade duly postforming laminated finish including 0.8mm thick pvc edge-banding with auto-lipped through-feed. |
| 93 | S&F new Leg/Sttiffener of complete all as specified and directed by Engr-in-Charge. |
| 94 | S&F new Long Rail of complete all as specified and directed by Engr-in-Charge. |
| 95 | M&L for Rubber shoes |
| 96 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two or more coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 97 | Replacement of following U/S parts of \\"Bed Hard Steel with Plywood\\" suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge (FD/E6/MA/P/08) at site. |
| 98 | S&F new headrest made out of 18mm thick prelaminated MDF board of exterior grade fixed with screws including 2mm thick PVC edging. |
| 99 | S&F new footrest made out of 18mm thick prelaminated MDF board of exterior grade fixed with screws including 2mm thick PVC edging. |
| 100 | S&F new 12mm thick BWR commercial ply of size 1980x900mm , fitted with suitable nut & bolt. |
| 101 | S&F new hard Rubber Shoes. |
| 102 | M&L for Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying Two coat of synthetic enamel paint (spray painting) of approved quality including removal of dents/bends & welding all as specified and as directed. |
| 103 | Replacement of following u/s parts of \\" Table bed side MAP\\" with suitable new parts of existing shape & size complete to match the original as shown on drg and all directed by Engr-In-Charge. (FD/E6/MAP/15) at site |
| 104 | S&F new top of existing size made of 18mm thick prelaminated MDF board including 0.8m thick pvc edge-banding with auto-lipped through-feed. |
| 105 | S&F different new parts of small drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood. |
| 106 | S&F different new parts of large drawers : Top/Side/Bottom of existing shape and size made of 18mm thick prelaminated MDF board & 12 mm thick commercial ply wood. |
| 107 | S&F suitable size new back of table bed side, made out of 12 mm thick commercial ply wood duly screwed as shown on drg as directed. |
| 108 | S&F suitable size new sides of table bed side, made out of 18mm thick prelaminated MDF board duly screwed as shown on drg as directed. |
| 109 | S&F of new heavy duty of suitable size of telescopic channel for smooth functioning of drawer as approved by GE. |
| 110 | S&F of new handle for drawer of table bed side MAP as approved by GE. |
| 111 | S&F of new hard rubber shoes (black) to legs of table bed side MAP as approved by GE. |
| 112 | Repalcement of old u/s front legs of table bed side with new front legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed. |
| 113 | Repalcement of old u/s rear legs of table bed side with new rear legs made out of 18mm MS square pipe (18 gauge) as shown on drg as directed. |
| 114 | Tightening of complete table by suitable size nails & screw as directed by Engr-in-Charge on site. |
| 115 | M&L for two or more coats synthetic enamel black paint on steel frame surface with high class finish including necessary rubbing, denting, welding and smoothness surfaces all as directed. |
| 116 | Replacement of following u/s parts of \\"Rack shoe steel \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge. (FD/E6/Map/02 (R) at site. |
| 117 | S&F New Rubber Shoes. |
| 118 | Replacement of MS wire mesh of shelves of Rack shoe steel as shown on drg and directed by Engr-in-Charge |
| 119 | M&L for two or more coat spray painting of synthetic enamel paint with high class finishing, including necessary rubbing, scrapping, denting, welding and leveling as specified & directed by Engr-In-Charge |
| 120 | Replacement of following u/s parts of \\"RACK STEEL Adjustable open type \\" with suitable new parts of existing shape & size complete to match the original as shown on drg and directed by Engr-In-Charge at site. |
| 121 | Back to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg and directed by Engr-in-Charge |
| 122 | Sides to rack six tiers steel made of 1mm thick M S Sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg and directed by Engr-in-Charge. |
| 123 | Shelves to rack six tiers steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg and directed by Engr-in-Charge |
| 124 | M&L for two or more coat spray painting of synthetic enamel paint with high class finishing, including necessary rubbing, scrapping, denting, welding and leveling as specified & directed by Engr-In-ChargeNote - (i) Repair/Maint work will be executed where the furniture exist in different user units/site/ JCOs/OR Md Accn under AOR of GE (A) No 2 Jodhpur as directed by Engr-in-Charge/BSO.(ii) The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ. Please Enable Macros to View BoQ information |
