|
| 1 | Surface dressing n.exc 15 cm deep and and getting out in soft and loose soil complete all as specified and as directed. |
| 2 | Surface Excavation in hard/dense soil n,exc 30cm deep and averaging 15cm deep and getting out complete all as specified and directed. |
| 3 | Excavation over areas n exc 1.5 mtr deep and getting out in any type of soil complete all as specified and directed. |
| 4 | Excavation over areas depth exc 1.5 mtr but n. exc. 3.00 mtr deep and getting out in any type of soil complete all as specified and directed. |
| 5 | Excavation in trenches, n exc 1.5 m wide and n. exc 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed. |
| 6 | Excvation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose of soil. |
| 7 | Excavating over areas, n exc 1.5m deep and getting out in hard & dense of soil complete all as specified and directed. |
| 8 | All as per item No. 7 here in before, but depth exc. 1.50m but not exc. 3.00 m |
| 9 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, cable laying etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out hard & dense soil complete. |
| 10 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complet all as specified and as directed |
| 11 | Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 12 | Removing Excavated soil exceeding 250 M but not exceeding 500M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 13 | M & L for Spreading & levelling of soil in layers n exc. 25 cm thick & well ramming including watering as required complete all as specified and directed. |
| 14 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed |
| 15 | M & L for Hand packing of broken stone ( any thickness) at back of the retaining wall etc and raising and lowering to required level complete all as specified and directed. |
| 16 | M&L for loose filling with brick bats of size 80 to 150mm in soakage wells complete all as specified and as directed. |
| 17 | M & L for hard core of gauge not exc. 63mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 18 | M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete, sub-base & apron etc complete all as specified and directed. |
| 19 | M&L for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete, sub-base & apron etc complete all as specified and directed. |
| 20 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete, sub-base & apron etc complete all as specified and directed. |
| 21 | M & L Cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate in surface channels and drains complete all as specified and as directed. |
| 22 | M & L for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in coping, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 23 | M & L Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete. |
| 24 | M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast cement concrete, manhole covers including all use of forms, moulds or machine moulds and setting the blocks, slabs etc in cement mortar 1:6,complete all as specified and directed. (Reinforcement shall be measured and paid separately) |
| 25 | M &L RCC M-25 (using 20mm graded stone aggregate) design mix for in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 26 | M&L for RCC M-25 design mix as in walls, retaining walls, basement walls, ballast walls and the like of any thickness above top of footing including attached pilasters and buttresses complete all as specified and directed. |
| 27 | M &L RCC M-25 (using 20mm graded stone aggregate) design mix for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc. complete all as specified and as directed. |
| 28 | M &L RCC M-25 (using 20mm graded stone aggregate) design mix for slab, chajja, sun shed etc. complete all as directed. |
| 29 | M &L RCC M-25 (using 20mm graded stone aggregate) design mix for beams, cantilevers, bressummers, lintels, lintel beam, roof beams etc |
| 30 | M&L for RCC M25 design mix as in column, pier, pillar, posts & complete all as specified and directed |
| 31 | M&L for Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete. |
| 32 | Supply only WPC complete all as specified and directed. |
| 33 | M&L for Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 34 | M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed. |
| 35 | M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed. |
| 36 | M&L for brick work with old size full brick th in Honey comb wall, brick subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) complete all as specified and directed. |
| 37 | M&L for Damp proof course 25 mm thick in cement mortar 1:2:4 to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed. |
| 38 | M&L for Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and directed |
| 39 | M&L for Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and directed |
| 40 | Use and waste of form work to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work vertical or to batter, flat, rough finish surface of concrete complete all as specified and directed. |
| 41 | Use and waste of form work to walls, retaining walls, basement walls, ballast walls and the like including attached pilasters and buttresses and similar work vertical or to batter, flat, fair finished surface of concrete complete all as specified and directed. |
| 42 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc. |
| 43 | Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edge etc. |
| 44 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams etc. |
| 45 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchion , rectangular or square on plan or etc. |
| 46 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed. |
| 47 | S&F Factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45x70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 48 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 49 | S&F Factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 50 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 51 | S&F Aluminium anodised barrel tower bolt extruded section and fixed of size 150 mm complete all as specified and as directed. |
| 52 | M&L for aluminium 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or aluminium alloy and fixed complete all as specified and directed. |
| 53 | S & F MS butt hinges 100 mm medium weight colled rolled fixed in repair complete all as specified and directed |
| 54 | S & F 150mm long aluminium handles cast type, anodised complete all as specified and as directed |
| 55 | S&F Mild steel bolts exc 12 mm n exc 20mm in dia purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut n. exc. 30 cm long complete all as specified and as directed. |
| 56 | S&F Mild steel bolts exc 12 mm n. exc. 20 mm in dia purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and as directed |
| 57 | S&F mild steel TMT bar 10 mm dia and over, as in reinforcement, cut to length, bent to shape etc, including binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 58 | All as per item No. 57 here in before but 6mm to 8mm dia. |
| 59 | S&F mild steel TMT bar 5 mm dia and over including 10 mm bars, as in stirrups, spacers and binders all as specified and directed. |
| 60 | M & L for MS Fe-410-W(Gde-E-250) quality-B Joists, channel, angle (45x45x6) or tee sections, fixed independently, without connecting, without connecting plates etc (cut to ordinary lengths) complete all as specified and as directed. |
| 61 | S & F for Plates Fe-410- W(Gde E-250) quality B (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. |
| 62 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed. |
| 63 | M&L Anodised aluminium grills DG-104 powder Coating to Item No. 10087 above to (minimum thickness of powder coating 50 micron), windows, ventilators including necessary C chanels, screws etc. complete all as specified and as directed. |
| 64 | M&L Plain, galvanised 0.63mm thick, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all specified and directed. |
| 65 | S&F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw as specified and directed |
| 66 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 67 | M&L for Water proofing treatment on \\"Non approachable / non accessible roof\\" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete(i) Applying approved bituminous based primer conforming to IS : 3384-1995 @ 0.3kg/Sqm to be applied on top surface of prepared surface till the surface is properly impregnated.(ii) Laying APP (Atactic polypropylene Polymer Modified preffabricated membrane) waterr proofing membrane of weight not less than 3 kg/sqm with minimum 100mm side overlap along the length from downward to upward completely sealed with torch application/hot blown lamps.(iii) Applying two cots of bituminous based aluminium paint @ 0.3 kg/Sqm complete all as specified and as directed. |
| 68 | M&L for Mirror polished Kota Stone slab flooring/ treads of 20-25 mm thick over cement screed bed 20mm thick in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. |
| 69 | M&L for Kota Stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed bed 10mm thick in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. |
| 70 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone for window cills in one pice including 20 mm thick screed bed in cement mortar (1:6) etc. complete all as specified and as directed. |
| 71 | M & L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3 complete all as specified and as directed. |
| 72 | M & L for 75mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base of floors etc. complete all as specified and as directed. |
| 73 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base comlete all as specified and directed |
| 74 | M&L for 100 mm thick cement concrete 1:2:4 type B-0 (using 12mm graded stone aggregate) as in flooring and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed |
| 75 | M&L for 150 mm thick cement concrete 1:2:4 type B-1 (using 12mm graded stone aggregate) as in floor of Ramp and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed |
| 76 | M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in sub base of floors etc. complete all as specified and as directed. |
| 77 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick in cement mortar 1:3 and pointed in white or coloured cement to match complete all as specified. |
| 78 | M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 10 mm thick in cement mortar 1:4 and pointed in white or coloured cement to match complete. |
| 79 | M & L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and as directed. |
| 80 | M & L for rendering 10 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) on walls complete all as specified and as directed. |
| 81 | M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement. |
| 82 | M & L for rendering 5 mm thick on fair faces of bricks/concrete surface in cement mortar (1:3) on RCC surfaces, celings, sides of beams, columns finishing the surfaces even and smooth without using extra cement. |
| 83 | M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) on wall using with water proofing compound as per manufacturar instruction finishing the surfaces even and smooth without using extra cement. NOTE : WPC will be measured and paid seperately . |
| 84 | M&L for preparation of new plastered surfaces of wall and two coats of oil bound distemper over a coat of primer complete all as specified & directed. |
| 85 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified & directed. |
| 86 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 87 | M&L Sheet glass 4.00mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 88 | M&L figured glass, pin headed 4.00mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 89 | M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 90 | S&F Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 91 | S&F 20mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and celing or laid in floors etc complete all as specified and directed. |
| 92 | S&F Rotational moulded polythene water storage tanks, three layered (Cylindrical vertical with closed top) of capacity 500 lit, hoisted and fixed in position as complete all as specified. |
| 93 | S&F Bib tap cast copper alloy chromium plated, fancy type, with capstain head handle screwed down screwed for iron pipe and fixed to 15mm bore pipe complete all as specified. |
| 94 | S&F Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified. |
| 95 | S&F Stop valve cast copper alloy 20 mm screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of bore 20mm fixed complete all as specified and directed. |
| 96 | S&F Angle/ stop cock fancy type, brass chromium plated with CP wall cap 15 mm bore complete all as specified. |
| 97 | S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s .and fixed to dia of pipe 20mm , complete all as specified and directed. |
| 98 | S & F Stainless Steel grating 125mm dia complete all as specified. |
| 99 | S&F CP towel rail 600 mm long fixed with and including chromium plated brass screws and wooden / plstic cleats. |
| 100 | S&F 450mm long PVC connection of approved quality with brass check nuts at both ends for 15mm bore pipe complete all as specified and directed. |
| 101 | S&F cast iron (Spun pipes) 75mm soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors. |
| 102 | S & F PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 103 | S & F PVC (SWR) pipes75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and as directed. |
| 104 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 105 | S&F PVC (SWR) pipes 110 mm single socketed in any length fixed in wall as weep holes complete all as directed. |
| 106 | S & F PVC (SWR) bends for 110mm dia PVC pipes with rubber ring joints complete all as specified and directed |
| 107 | S&F PVC bends for 75 mm bore complete all as specified and directed |
| 108 | S&F PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 109 | S&F PVC (SWR) 75 mm bore junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 110 | S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed. |
| 111 | S&F cast iron Nahani trap 75mm , plain with CP grating including jointing with solvent cement. |
| 112 | S&F glass shelf with CP railings 600 mm long fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed. |
| 113 | S&F vitreous China squatting pan, Orissa pattern incl CI spun trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed. |
| 114 | S & F Vitreous China urinal half stall white (minimum), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistren with brackets brackets flush pipe, grating and union for discharge pipe in repairs complete all as specified and as directed. |
| 115 | S&F PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed. |
| 116 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood & aluminium angle frame and fixed to wooden plugs with chromium plated brass screws washers complete all as specified and as directed. |
| 117 | Supply and fixing wash hand basin vitreous China table top type any size including cutting hole and pinning in ends of brackets or erecting stand with fixing 32mm dia waste coupling brass chromium plated suitable for wash basin and PVC waste pipe all as spd and directed . |
| 118 | M & L DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid in trenches and jointed as pe IS : 16098 complete all as specified and directed. |
| 119 | M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate) as in bed of drain pipes, laid to falls including packing under, haunching against the sides of pipes after they are laid, jointed and tested for 150mm bore pipe complete all as specified and directed. |
| 120 | M & L for point wiring with 1.5 Sqmm multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FR-LSH cable drawn in & including PVC casing capping of required size, including all accessories bend junction etc as approved, with PVC 1.5 mm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, PVC terminal box and PVC board making good disturbed surface to match with the existing surface complete all as directed by Engineer-In-charge for one light point/fan point/ exhaust fan point controlled by one switch one way. |
| 121 | All as per item No. 120 here - in - before but for One 3 pin switch socket combination 5 Amps on independent board. |
| 122 | All as per item No. 120 here - in - before but for One 3 pin switch socket combination 15 Amps on independent board with elect wiring 2.5 Sqmm & earth FRLSH cable of 2.5 Sqmm. |
| 123 | All as per item No. 120 here - in - before but for 5 Amps socket point on the same board controlled by one switch. Please Enable Macros to View BoQ information |
| 124 | All as per item No. 120 here - in - before but for 5 Amps socket point on the same board controlled by one switch. Please Enable Macros to View BoQ information |
