Tender For Varrious Ar/Sr/Deposit/ Mow / Anurakshan Work In Govt Residential Building (Rb) Vip Building On Maihar, Under Sub Division Maihar.(Building S.O.R. 01.01.2024)
Tender Value
11.99 Lakhs
Estimated cost
Bid Submission
27 Apr 2026
0 days left
EMD
24000
Bank guarantee accepted
Document Fee
2295
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Maihar → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Varrious Ar/Sr/Deposit/ Mow / Anurakshan Work In Govt Residential Building (Rb) Vip Building On Maihar, Under Sub Division Maihar.(Building S.O.R. 01.01.2024)
BOQ
| Sl. No. | Item Description |
| 1 | Under floor filling stone dust Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding |
| 2 | C.C. upto plinth level Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :4.1.1.4) M-10 M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) |
| 3 | Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete.6.1.2) CM 1:6 Cement mortar 1:6 (1 cement : 6 sand) |
| 4 | Providing and fixing panelled or panelledand glazed shutters for doors, windows andclerestory windows including ISI markedM.S. pressed butt hinges bright finished ofrequired size with necessary screwsexcluding, panelling/glazing which will bepaid for separately, all complete as perdirection of Engineer-in-charge.9.5.2.2) 30 mm thick shutters |
| 5 | Providing and fixing wire gauze shuttersusing galvanised M.S. wire gauze ofaverage width of aperture 1.4mm in bothdirection with wire of dia. 0.63 mm fordoors, windows and clerestory windowswith hinges and necessary screws:9.25.2.2) Kiln seasoned and chemically treated Haldu, Kail, Bija wood. |
| 6 | Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge: 9.26.1) 35 mm thick shutters |
| 7 | Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete: 9.65.1) 300 mm 300x16 mm |
| 8 | 9.65.2) 250 mm 250x16 mm |
| 9 | S.S. tower bolt. Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : 9.66.1) 250 mm 250x10 mm |
| 10 | 9.66.2) 200 mm 200x10 mm |
| 11 | 9.66.3) 150 mm 150x10 mm |
| 12 | Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete :9.69.1) 125 mm 125 mm |
| 13 | 9.69.2) 100 mm 100 mm |
| 14 | 9.69.3) 75 mm 75 mm |
| 15 | S.S. butt hinges (heavy weight) Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 9.74.1) 125 mm 125x64x2.50 mm |
| 16 | 9.74.2) 100 mm 100x60x2.50 mm |
| 17 | 9.74.3) 75 mm 75x50x2.50 mm |
| 18 | Providing and fixing of 1.25 mm thickchromium plated brass plate, with twochromium plated curtain rods brass bracketsfixed with C.P. brass screws and woodenplugs, etc., wherever necessary complete9.41.2) 20 mm dia. |
| 19 | Providing and fixing aluminium tower boltsISI marked anodised (anodic coatingnot less than grade AC 10 as per IS : 1868)transparent or dyed to required colour orshade with necessary screws etc. complete:9.110.5) 400X10mm |
| 20 | 9.110.6) 100x10 mm |
| 21 | Aluminium hydraulic door closer door weight upto 35 kg Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary ccessories and screws etc. complete. |
| 22 | Aluminium tower bolts Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:9.110.1.2) 300mm 300x10 mm |
| 23 | 9.110.1.2.3) 250mm 250x10 mm |
| 24 | 9.110.1.2.4) 200mm 200x10 mm |
| 25 | Providing and fixing bright finished100mm mortice lock with 6 levers withoutpair of handles for aluminium door withnecessary screws etc complete (Best makeof approved quality) as per direction ofEngineer-in-charge. |
| 26 | Providing and fixing magnetic catcher incupboard / ward robe shutters includingfixing with necessary screws etc. complete(Best make of approved quality).9.129.1) Triple strip vertical type. |
| 27 | Providing and fixing 12mm thick panellingor panelling and glazing in panelled orpanelled and glazed shutters for doors,windows and clerestory windows (area ofopening for panel inserts excluding portioninside grooves or rebates to be measured).Panelling for panelled or panelled andglazed shutters 25mm to 40mm thick.9.133.1) Marine plywood conforming to IS: 710 |
| 28 | Factory made solid wood plastic composite (WPC) doorframes Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed S.S. screws having inimum density of 750 kg/m3 and screw withdrawal strength of 2200 N (Face) & 900 N (Edge), minimum compressive strength 58 N/mm2, modulus of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) 9.169.1) 75 mm X 50mm Single rebate (75 mm X 50 mm) |
| 29 | 9.169.5) 125 mm X 65 mm Single or double rebate (125 mm X 65 mm) |
| 30 | WPC flush door (decorative type) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)9.171.1) 30 mm thick WPC (Wood PolymerComposite) solid decorative type flushdoor shutter |
| 31 | Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar :4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11.80.1.2) 600X600 (b) Size 600X600mm thickness 9-10mm |
| 32 | Vitrified floor- tiles full body skirting, riser, dado and wall lining Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours & shades, 1st quality/ premium quality in skirting, riser, dado and wall lining laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete 11.81.1.2) 600X600 (b) Size 600X600mm thickness 9-10mm |
| 33 | Providing and fixing false ceiling at allheight including providing and fixing offrame work made of special sections,power pressed from M.S. sheets andgalvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats ofsize 25 mm wide x 1.6 mm thick withflanges of 27 mm and 37mm, at 1200mm centre to centre, one flange fixedto the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm diabolts,other flange of cleat fixed to the anglehangers of 25x10x0.50 mm of requiredlength with nuts & bolts of requiredsize and other end of angle hanger fixedwith intermediate G.I. channels45x15x0.9 mm running at the spacingof 1200 mm centre to centre, to whichthe ceiling section 0.5 mm thick bottomwedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm,at 450 mm centre to centre, shall befixed in a direction perpendicular to G.I.intermediate channel with connectingclips made out of 2.64 mm dia x 230mm long G.I. wire at every junction,including fixing perimeter channels (Fully Perforated Gypsum PlasterBoard having approx. 15 % perforatedarea with perforation size and pattern asapproved by the Engineer-in-chargeand as per manufacturer's specification,with all 4 side tapered and backed byacoustical tissue with NRC value notless than 0.60.)0.5 mm thick 27 mm high havingflanges of 20 mm and 30 mm long, theperimeter of ceiling fixed towall/partition with the help of rawlplugs at 450 mm centre, with 25mmlong dry wall screws @ 230 mminterval, including fixing of gypsumboard to ceiling section and perimeterchannel with the help of dry wallscrews of size 3.5 x 25 mm at 230 mmc/c, including jointing and finishing toa flush finish of tapered and squareedges of the board with recommendedjointing compound , jointing tapes,finishing with jointing compound in 3layers covering upto 150 mm on bothsides of joint and two coats of primersuitable for board, all as permanufacturer's specification and alsoincluding the cost of making openingsfor light fittings, grills, diffusers,cutouts made with frame of perimeterchannels suitably fixed, all complete asper drawings, specification anddirection of the Engineer in Charge butexcluding the cost of painting with |
| 34 | Extra for Circular cutting and wastagesin ceiling with: board only (framework) Natural colour insulating 12 mmthick board paid separately. |
| 35 | Extra for providing and fixing ceilingto curved surfaces in narrow widths |
| 36 | 15 mm cement plaster on the rough side of single or half brick wall of mix 13.2.2) 1:6 1:6 (1 cement : 6 sand) |
| 37 | 12 mm cement plaster of mix : 1:6 1:6 (1 cement : 6 sand) |
| 38 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge.13.2.1) 1:3:6 or richer Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). |
| 39 | Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete 13.27.1) Chicken mesh in plaster G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height |
| 40 | POP putty Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 41 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of Chief Engineer will be required |
| 42 | Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. |
| 43 | Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 44 | Lacquer polishing on wood work Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor. One or more coats on old work. |
| 45 | C.P. brass chain and rubber plug Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin :14.47.1) 32 mm dia |
| 46 | 14.47.2) 40 mm dia |
| 47 | Water proofing cement paint on wall (Old work) Finishing walls with water proofing cement paint of required shade. With Primer , Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. |
| 48 | Deluxe Multi surface paint interiors and exteriors (Old work) Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :14.53.1) On wall One or more coats applied on walls @ 0.85 ltr/10 sqm. |
| 49 | On Wood Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm |
| 50 | On steel Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. |
| 51 | Melamine polishing (Old work) Melamine polishing on wood work (one or more coat). Old work |
| 52 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. |
| 53 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge.15.6.3) In cement mortar |
| 54 | Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 55 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 56 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: 15.15.1) Of area 3 sq. metres and below. |
| 57 | Demolishing brick work Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge.15.6.3) In cement mortar In cement mortar |
| 58 | Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 59 | Providing and fixing C.P. brass soap container 109 mm wide, 125 high and 112 mm distance from wall of standard shape with bracket of the same material with all fittings etc. of approved quality and conforming to IS: specification. |
| 60 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. Weighing not less than 105 gms. |
| 61 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. |
| 62 | CPVC pipes internal work Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineerin-Charge.18.6.1.1) 15 mm 15 mm nominal outer dia .Pipes. |
| 63 | Stainless Steel Fitting of press fit type Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required diaas per dirction of Engineer-in-Charge. 18.10.1.1) 15.88 mm For 15.88 mm outer diaPipe |
| 64 | 18.10.1.2) 22.22 mm For 22.22 mm outer dia Pipe |
| 65 | Gun metal gate valve Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.12.1.1) 25 mm dia 25 mm nominal bore |
| 66 | 18.12.1.2) 32 mm dia 32 mm nominal bore. |
| 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. This included jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in- Charge. External Work18.71.1) 15 mm 15 mm nominal outer dia .Pipes. |
| 68 | 18.71.2) 20 mm 20 mm nominal outer dia .Pipes. |
| 69 | Providing and fixing Polyethelene-Aluminium- Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80° C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows ,tees ,reducers, couplers and connectors etc. with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work18.2.1) 16 mm 1216 (16 mm OD) pipe (minimum wall thickness 1.75mm) |
| 70 | Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required diaas per dirction of Engineer-in-Charge. 18.10.1.1) 15.88 mm For 15.88 mm outer diaPipe |
| 71 | Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) |
| 72 | Towel rail 600 mm Providing and fixing in position best Indian Stainless steel made (0.3 micron Chrome and 10 micron Nickel plated) Single Towel Rail 600 mm long. (Premium Range) |
| 73 | Soap dish holder Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish Holder. (Premium Range) |
| 74 | Toilet paper holder Providing and fixing in position best Indian Stainless steel made (0.3 micron Chrome and 10 micron Nickel plated) Toilet paper holder with Flap. (Premium Range) |
| 75 | Pillar cock (wash basin) Providing and fixing in position best indian Auto Closing Pillar Cock with 65 mm Extension body (with DECOL cartredge) for wash basin use. |
| 76 | Pillar cock Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Pillar cock. (Premium Range) |
| 77 | Bib cock Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) |
| 78 | Wall Mixer Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) Wall Mixer with 115mm bend. (Premium Range) |
| 79 | Shower rose 150mm Providing and fixing in position best Indian shower rose 150mm dia, body and face chrome plated, brass made body, Silicon based Rubbit cleaning nozzles.(Premium Range) |
| 80 | Shower arm length 400 mm Providing and fixing in position best Indian C. P. brass made Shower Arm Length 400x25x25mm (nickel plating 0.10 micron and chrome plating 0.3 micron).(Premium Range Sanitary Ware) |
| 81 | Glass Self 600mm Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Glass Self-size 600mm with toughened glass (Premium Range) |
| 82 | Towel Rake 600 mm Providing and fixing in position best Indian Stainless steel made (0.3 micron Chrome and 10 micron Nickel plated) Towel Rake 600 mm. (Premium Range) |
| 83 | Providing and fixing white vitreous china type Anti germ Fluoro-Polymer Coated Wash Basin with 15 mm Table mounted single lever Tall boy basin mixture, (cartridge size 32 mm) 15mm quarter turn angular stop cock, 32 mm C. P. brass made waste coupling length 130mm and 32 mm C. P. Brass Made Bottle Trap size 200x300mm fittings and fixtures complete including Painting of fittings and cutting and making good the wall and floors wherever required. White vitreous china type Anti germ fluoro- polymer coated counter top wash basin Size 530x420x140mm with tall boy basin mixture, (cartridge size 32 mm). (Premium Range) |
| 84 | Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete. Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 685mm with solid poly propelyne made soft closing seat cover.(Premium Range) |
| 85 | Thermostat Mixer : Providing and fixing in position best Indian, concealed high flow bath and shower mixer with thermostatic control cartridge (standard temperature range 15 degree c to 60 degree c, cartridge made of high performance thermostatic Polymer material with Anti scaled function). (Premium Range) |
| 86 | W. C. brush holder Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) W. C. Brush Holder. (Premium Range) |
| 87 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1.2) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 88 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item21.03.02)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) |
| 89 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). |
| 90 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand). |
| 91 | Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 14.23.1) 20 mm diameter. |
| 92 | 14.23.2) 25 mm diameter. |
| 93 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work |
| 94 | Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. |
| 95 | Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. |
| 96 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. |
| 97 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 98 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete14.71.1) 125x70x4 mm (ordinary type) |
| 99 | 100x70x4 mm (ordinary type) |
| 100 | 75x65x4 mm (heavy type) |
| 101 | 75x40x2.5 mm (ordinary type) |
| 102 | 50x40x2.5 mm (ordinary type |
| 103 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete: Note:- Aluminum hinges shall not be used in wooden shutters. 9.108.6) 75x63x4 mm |
| 104 | 9.108.7) 75x63x3.2 mm |
| 105 | 9.108.8) 75x45x3.2 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Apr 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedApr 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender