|
| 1 | CARRIAGE |
| 2 | Mechanical transportation, loading, unloading and handling of various items such as pump parts, motors, starters, voltage stabilizers, coil assemblies, welding tools & plant, etc. using appropriate means of transport as under: |
| 3 | Private car, auto-rickshaw or similar with 1.0 km lead |
| 4 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 5 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 6 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 7 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 8 | Load carrier auto, mini van or similar with 1.0 km lead |
| 9 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 10 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 11 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 12 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 13 | Mini truck like Tata mobile, Bolero Camper or similar with 1.0 km lead |
| 14 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 15 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 16 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 17 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 18 | Truck, tipper or similar with 1.0 km lead |
| 19 | Extra per kilometer for lead >1.0 kms upto 5.0 kms |
| 20 | Extra per kilometer for lead >5.0 kms upto 10.0 kms |
| 21 | Extra per kilometer for lead >10.0 kms upto 20.0 kms |
| 22 | Extra per kilometer for lead >20.0 kms upto 30.0 kms |
| 23 | Head load carriage of machinery/ equipment at locations inaccessible by vehicles on plain/ rough terrain |
| 24 | Upto 50 kgs load |
| 25 | Extra for every additional 50kgs load (Note: Fraction >=25kgs shall be taken as equivalent to next load of 50kgs) |
| 26 | Extra for uphill terrain (Ground Slope >= 07 deg) |
| 27 | DISMANTLING AND ASSEMBLING |
| 28 | MOTORS |
| 29 | Disconnecting of all motor leads, dismantling of motor, draining off the m.oil (if applicable) and collection in suitable pan, taking out the rotor from the stator, and complete disassembly as per requirement of job: |
| 30 | upto 10 HP |
| 31 | upto 60 HP |
| 32 | >60 upto 200 HP |
| 33 | >200 HP upto 350 HP |
| 34 | Assembling of all motor parts, refilling of drained out m.oil (if applicable), coupling and alignment with pump, reconnecting of leads and testing on full load. |
| 35 | upto 10 HP |
| 36 | upto 60 HP |
| 37 | >60 upto 200 HP |
| 38 | >200 HP upto 350 HP |
| 39 | VOLTAGE STABILIZERS |
| 40 | Dismantling of 415V 3-ph Voltage Stabilizer by way of opening of top lid, disassembling of voltage regulator, removing of all incoming and outgoing connections, taking out of damaged copper legs after removal of core, etc. The job includes draining out of T. Oil and its safe placement for further refilling. |
| 41 | upto 50 kVA |
| 42 | >50 upto 100kVA |
| 43 | >100kVA upto 250 kVA |
| 44 | greater than 250 kVA |
| 45 | Assembling of all parts of 3-ph Voltage Stabilizer, connecting of leads of all incoming and outgoing connections and refilling of old drained out of T. Oil |
| 46 | upto 50 kVA |
| 47 | >50 upto 100kVA |
| 48 | >100kVA upto 250 kVA |
| 49 | greater than 250 kVA |
| 50 | TRANSFORMER |
| 51 | Dismantling of 33/0.4 kv or 11/0.4kV transformer by way of disconnecting of all HT and LT connections, opening of top lid, draining out of T. Oil and its safe placement for further refilling, taking out of coils after removal of core assembly, etc. Job also includes detaching of core HV/LV coils. |
| 52 | upto 50 kVA |
| 53 | >50 upto 100kVA |
| 54 | >100kVA upto 250 kVA |
| 55 | greater than 250 kVA upto 630kVA |
| 56 | greater than s30 kVA upto 1MVA |
| 57 | greater than 1MVA upto 2MVA |
| 58 | greater than 2 MVA upto 4MVA |
| 59 | Complete assembling of 33/0.4 kv or 11/0.4kV transformer after cleaning of tank, fitting of coil assembly in the tank. Job further includes closing of the transformer lid by way of fitting of existing nuts/bolts and gaskets, insulators, etc. Refilling of t.oil upto required level in tank. Reconnecting of HT/ LT connections and testing. |
| 60 | upto 50 kVA |
| 61 | >50 upto 100kVA |
| 62 | >100kVA upto 250 kVA |
| 63 | greater than 250 kVA upto 630kVA |
| 64 | greater than s30 kVA upto 1MVA |
| 65 | greater than 1MVA upto 2MVA |
| 66 | greater than 2 MVA upto 4MVA |
| 67 | STARTER |
| 68 | Isolating and disconnecting of all incoming and outgoing leads from autotransformer starter. Draining out transformer oil from the oil tank and collecting in a suitable vessel. Taking out the damaged autotransformer coil assembly from oil tank. |
| 69 | upto 60 HP rating |
| 70 | >60 upto 200 HP |
| 71 | >200 HP upto 350 HP |
| 72 | Fitting of autotransformer coil assembly in the starter oil tank, refilling of collected t.oil in the tank, reconnecting all leads and load testing of the starter. |
| 73 | upto 60 HP rating |
| 74 | >60 upto 200 HP |
| 75 | >200 HP upto 350 HP |
| 76 | ELECTRICAL WORKS |
| 77 | MOTORS |
| 78 | Complete rewinding of stator coils of 3-phase LV horizontal/ vertical induction motor/ submersible motor/ autotransformer/ voltage stabilizer/ etc. with suitable copper wire after complete removal of burnt out winding, cleaning of slots, insulation varnishing, etc.. (Note: The unserviceable scrap copper generated is not taken into account for estimation of rates and shall be credited separately) |
| 79 | Providing and fitting of finished new electrolytic grade copper wire windings with insulation in place of damaged windings including allied jobs such as varnishing, drying, etc., (Both HV & LV) - per kg of winding. |
| 80 | Providing and fitting of finished new electrolytic grade copper strip windings with insulation in place of damaged windings including allied costs such as varnish , drying, etc., (Both HV & LV) - per kg of winding. |
| 81 | Varnishing, impregnation and drying of stator windings of LT motors with standard quality varnish as specified below along with proper tapings, etc. as per requirement. |
| 82 | upto 5HP |
| 83 | > 5 HP upto 20 HP |
| 84 | > 20 HP upto 50 HP |
| 85 | > 50 HP upto 100 HP |
| 86 | > 100 HP upto 200 HP |
| 87 | > 200 HP upto 350 HP |
| 88 | Providing and replacement of copper contact points on regulator plate |
| 89 | Providing and Fitting of LV copper terminal connectors with allied insulation (for finished weight of the connector) |
| 90 | SCRAP |
| 91 | Credit value for insulated copper scrap |
| 92 | Credit value for insulated Aluminium scrap |
| 93 | STARTERS AND ALLIED COMPONENTS |
| 94 | CONTACTORS |
| 95 | Providing and fitting of 3-pole contactor with specified coil voltage: |
| 96 | L&T ML 2 |
| 97 | L&T ML 3 |
| 98 | L&T ML 4 /ML 4W |
| 99 | L&T ML 6 |
| 100 | L&TML10 (As per previous list price) |
| 101 | L&T ML 12 |
| 102 | HAVELLS CH2-225T |
| 103 | HAVELLS CH5-400T |
| 104 | HAVELLS CH7-630 |
| 105 | LC1 FDP 300A (SCHNEIDER-TC) |
| 106 | LC1 FDP 400A (SCHNEIDER-TC) |
| 107 | LC1 FDP 500A (SCHNEIDER-TC) |
| 108 | L&T MNX 80 |
| 109 | L&T MNX 110 |
| 110 | L&T MNX 140 |
| 111 | L&T MNX 300 |
| 112 | L&T MNX 400 |
| 113 | 45A AC-3 rating with 2NO + 2NC auxillary contacts (Siemens 3TF/ L&T Type MO/ Schneider) |
| 114 | Providing and fitting of new AC coil with specified coil voltage for contactors as under: |
| 115 | L&T ML2/ ML2W/ ML3/ ML3W |
| 116 | L&T ML4/ ML4W/ ML6 |
| 117 | L&T ML 10/ 12 |
| 118 | L&T MNX 50/ 70/ 80 |
| 119 | L&T MNX 95/ 110/ 140 |
| 120 | L&T MNX 185/ 225/ 250 |
| 121 | L&T MNX 300/ 400 |
| 122 | L&T MNX 550/ 650 |
| 123 | Schneider Electric LC1F185/ LC1F225 |
| 124 | Schneider Electric LC1F265/ LC1F330 |
| 125 | Schneider Electric LC1F400 |
| 126 | Schneider Electric LC1F630 |
| 127 | Providing and fitting of new Contact kit set for contactors |
| 128 | 32A AC-3 rating (Siemens 3TF/ L&T Type MO/ Schneider) |
| 129 | L&T ML 2 |
| 130 | L&T ML 3 |
| 131 | L&T ML 4 |
| 132 | L&T ML 6 |
| 133 | L&T ML 10 |
| 134 | L&T ML 12 |
| 135 | L&T MNX 80 |
| 136 | L&T MNX 95 |
| 137 | L&T MNX 110 |
| 138 | L&T MNX 140 |
| 139 | L&T MNX 225/250/300 |
| 140 | L&T MNX 400 |
| 141 | L&T MNX 550 |
| 142 | L&T MNX 650 |
| 143 | Providing and fitting of auxillary contactors/ control relay |
| 144 | L&T MX0 having 04 contacts (all combinations) for AC control |
| 145 | L&T ML (1NO+1NC) side mounting auxillary contact block |
| 146 | L&T MNX/MCX front mounting type auxillary contact block having 04 contacts (all combinations) |
| 147 | TIMING RELAYS |
| 148 | Providing, fitting and setting up of single range auto reset synchronous ON delay timer ( schneider or equivalent make) |
| 149 | Providing, fitting and setting of electropneumatic timing relay with timing range upto 60s; coil voltage 415V AC (BCH make or equivalent) . |
| 150 | (2NO + 2NC) double block; ON delay |
| 151 | (2NO + 2NC) double block; ON & OFF delay |
| 152 | Providing and fitting of spares for electropneumatic timing relay (BCH make or equivalent) . |
| 153 | (2NO + 2NC) contact block |
| 154 | Magnetic coil 415V AC |
| 155 | Magnet frame assembly without coil |
| 156 | Providing, fitting and setting of DIN mounted electronic Timer (L&T GIC or equivalent make) |
| 157 | Star Delta (range from 12s - 120s) 240 - 415V AC |
| 158 | Star Delta (range from 3s - 30s) 240 - 415V AC |
| 159 | THERMAL OVERLOAD RELAY |
| 160 | Providing, fitting and setting of thermal overload relay of specified relay range (Make: L&T MN2) |
| 161 | 9-15A |
| 162 | 14-23A |
| 163 | 20-33A |
| 164 | 24-40A |
| 165 | Providing, fitting and setting of thermal overload relay of specified relay range (Make: L&T MN5) |
| 166 | 9-15A |
| 167 | 14-23A |
| 168 | 20-33A |
| 169 | 30-50A |
| 170 | 36-60A |
| 171 | 45-75A |
| 172 | 66-110A |
| 173 | Providing, fitting and setting of thermal overload relay of specified relay range |
| 174 | L&T ML2/3 (Relay ranges in between 9A to 42A) |
| 175 | Providing and fitting of bakelite connection plate min. 10mm thick as per given size for autotransformer with holes for connection studs drilled at requisite spots. |
| 176 | Complete servicing of control wiring of ATS including checking, tightening of connections, tapping and insulation as per requirement. |
| 177 | Complete replacement of suitable copper control wiring of ATS including connections, tapping and insulation as per requirement. |
| 178 | OIL IMMERSED MANUAL/ SEMI-AUTOMATIC/ FULLY-AUTOMATIC STARTER SPARES |
| 179 | Providing and replacement of operating coil for oil immersed semi-automatic starter, upto 40HP |
| 180 | Providing and fitting of heavy duty contact kit set for semi-automatic/ fully automatic SD oil immersed starters (set of 03 moving and 06 stationary contacts) |
| 181 | Upto 40 HP |
| 182 | Spares for oil immersed manual starters |
| 183 | Fixed finger contact |
| 184 | Moving tip contact |
| 185 | No volt coil |
| 186 | Moving drum contact (starters upto 40HP) |
| 187 | Moving drum contact (starters > 40HP) |
| 188 | Base plate Bakelite/ DMC (starters upto 40HP) |
| 189 | Base plate Bakelite/ DMC (starters > 40HP) |
| 190 | Steam carrier assembly (starters upto 40HP) |
| 191 | Steam carrier assembly (starters > 40HP) |
| 192 | Sequence shaft (starters upto 40HP) |
| 193 | Sequence shaft (starters > 40HP) |
| 194 | Bakelite tube for Sequence shaft (starters upto 40HP) |
| 195 | Bakelite tube for Sequence shaft (starters > 40HP) |
| 196 | Trip rod assembly (starters upto 40HP) |
| 197 | Trip rod assembly (starters > 40HP) |
| 198 | Lock lever |
| 199 | Cam assembly |
| 200 | Oil dashpot assembly |
| 201 | Overload coil (set of 03 nos.) upto 20HP |
| 202 | Overload coil (set of 03 nos.) 30- 40HP |
| 203 | Overload coil (set of 03 nos.) 50- 60HP |
| 204 | Overload coil (set of 03 nos.) 70- 80HP |
| 205 | Overload coil (set of 03 nos.) 90- 100HP |
| 206 | L&T MU-G SUBMERSIBLE PUMP CONTROLLER SPARES |
| 207 | Volt-Ammeter 500V, 0-100 A |
| 208 | Electronic Star-Delta Timer 160-500V, 3-30s (L&T ST100/ ) |
| 209 | Providing and fitting of Terminal Block |
| 210 | 60A - 3 way |
| 211 | 100A - 3 way |
| 212 | Providing and fitting of Direct online DOL Starters |
| 213 | MUG-06 DOL with relay range: |
| 214 | 4-6.5 A |
| 215 | 6-10 A |
| 216 | 9-14 A |
| 217 | MUG-7.5 DOL with relay range: |
| 218 | 13-22 A |
| 219 | 20-32 A |
| 220 | MUG-10 DOL with relay range: |
| 221 | 4-6.5 A |
| 222 | 6-10 A |
| 223 | 9-14 A |
| 224 | 13-21 A |
| 225 | 15-25 A |
| 226 | Providing and fitting of Fully Automatic Star Delta Starters |
| 227 | MUG 15 with relay range: |
| 228 | 6-10 A |
| 229 | 9-14 A |
| 230 | 11-18 A |
| 231 | 13-22 A |
| 232 | MUG 20 with relay range: |
| 233 | 9-14 A |
| 234 | 13-21 A |
| 235 | 15-25 A |
| 236 | 20-32 A |
| 237 | MUG 25 with relay range: |
| 238 | 24-38 A |
| 239 | 28-42 A |
| 240 | MUG 30 with relay range: |
| 241 | 20-33 A |
| 242 | 30-50 A |
| 243 | MUG 40 with relay range: |
| 244 | 30-50 A |
| 245 | 36-60 A |
| 246 | MUG 50 with relay range: |
| 247 | 30-50 A |
| 248 | 45-75 A |
| 249 | MUG 75 with relay range: |
| 250 | 45-75 |
| 251 | 66-110 A |
| 252 | SWITCHGEAR |
| 253 | Providing and fitting of 3-pole 415V MCCB with thermal magnetic release having 36kA breaking capacity (Ics= 100% Icu) (Make: L&T d-sine or equivalent) having max. of thermal release range as under: |
| 254 | upto and including 100A |
| 255 | Providing and fitting of 3-pole 415V MCCB with thermal magnetic release having 50kA breaking capacity Ics = 100% Icu (Make: L&T d-sine or similar) Having max. of thermal release range as under: |
| 256 | Providing of set of spreader terminals for above 3-pole MCCBs |
| 257 | Providing and fitting of 4-pole 415V MCCB with thermal magnetic release having 50kA breaking capacity Ics = 100% Icu (Make: L&T d-sine or similar) Having max. of thermal release range as under: |
| 258 | SPARES FOR ACB (L&T C-POWER) |
| 259 | Providing and fitting of pole assembly for draw out type ACB (L&T C-power) |
| 260 | upto 1250A |
| 261 | 2000A |
| 262 | Providing and fitting of Arc Chute (440V) for ACB (L&T C-power) |
| 263 | upto 1250A |
| 264 | 1600 - 2000A |
| 265 | Providing and fitting of Jaw contact for ACB (L&T C-power) |
| 266 | 630-1000A |
| 267 | 1250/ |
| 268 | 1600A/ 2000A |
| 269 | Providing and fitting of Fixed arcing contact for ACB (L&T C-power) |
| 270 | 800- 1600A |
| 271 | 2000A |
| 272 | Providing and fitting of Moving arcing contact for ACB (L&T C-power) |
| 273 | 800- 2000A |
| 274 | Providing and fitting of Shunt release for ACB (L&T C-power) |
| 275 | Providing and fitting of Under Voltage Release for ACB (L&T C-power) |
| 276 | Providing and fitting of Earth Fault Release for ACB (L&T C-power) |
| 277 | Providing and fitting of Terminal Adaptor for Draw out L&T C-POWER ACB of ratings as under: |
| 278 | upto 800 - 1000 A |
| 279 | upto 1250 - 2000 A |
| 280 | Providing and fitting of thermal-Magnetic Release (type DN1) for L&T C-power ACB |
| 281 | Providing and fitting of CT for DN1 type L&T C-power ACB |
| 282 | 800/ 1000A |
| 283 | 1250/ 1600A |
| 284 | 2000A |
| 285 | Providing and fitting of main spring for 3-pole ACB (L&T C-power) |
| 286 | 800- 1600A |
| 287 | 2000A |
| 288 | SPARES FOR ACB (Havelles Tatania model) |
| 289 | Shunt Trip / Closing Coil |
| 290 | Under Voltage Trip Device (UVT) (220 /415 V AC) |
| 291 | Main/Neutral CT’s |
| 292 | CT 400A/630A/800 A |
| 293 | CT 1000A/1250A/1650 A |
| 294 | Spring charge indication switch |
| 295 | Trip indication Switch |
| 296 | Aux. switch (5 c/o additional) |
| 297 | Position indication switch |
| 298 | Field test unit |
| 299 | Other Accessories for the ACB |
| 300 | On/Off Button cover |
| 301 | Key lock (1 lock+1 key) |
| 302 | Key interlock (2 locks+1 keys) |
| 303 | Key interlock (3 locks+2 keys) |
| 304 | Drawout position Lock |
| 305 | Door Interlook |
| 306 | Close open cycle counter |
| 307 | Adaptor Type Terminals |
| 308 | 630A/800A |
| 309 | 1000A/1250A |
| 310 | 1600A |
| 311 | Spares for VCB |
| 312 | Providing and Replacement of following items |
| 313 | Vacuum Interrupter VAG-2 |
| 314 | Isolating Contact Assy |
| 315 | Release Coil Assy with Plunger |
| 316 | Tripping Coil |
| 317 | Closing Coil |
| 318 | Ratchet Wheel |
| 319 | Spring Charging Motor 110 V DC/ 230V AC |
| 320 | Motor Cut-off Limit Switch |
| 321 | Push-to Trip/Close Knob Assy |
| 322 | On/Off Indicator Assy |
| 323 | Charge free Indicator Assy Operation Counter |
| 324 | Repairing/ Replacement of 11 KV VCB's |
| 325 | Tripping Mechanism |
| 326 | Modification of Mechanism |
| 327 | Resetting links |
| 328 | Replacement of Operating Shafts |
| 329 | Shower Contact |
| 330 | Isolating Sockets |
| 331 | Closing Mechanisms (Replacements) |
| 332 | High tension springs |
| 333 | Tripping Shaft |
| 334 | Rollers |
| 335 | Latch assembly |
| 336 | Overhauling of 11KV VCB |
| 337 | Deco spray painting |
| 338 | I/T/C of power transformer with system of capacity(3.15 MVA/2.5 MVA/.63 MVA/.25 MVA) complete job including all necessary testing at site |
| 339 | Dismantling of Power Transformer from system of capacity (3.15MVA/2.5MVA/.63MVA/.25MVA) complete job |
| 340 | Panel Accessories |
| 341 | Providing and fitting of 96x96 flush mounting 3-phase LED ammeter/ voltmeter of Class 0.5 accuracy (Make: L&T/ Rishabh/ AE/ any other Reputed make) |
| 342 | Providing and fitting of flush type analog moving iron AC meter as under:(Make: Rishabh/ AE/ C&S/ BCH/ L&T/ any other Reputed make) |
| 343 | 96x96mm 500V voltmeter |
| 344 | 96x96mm 100A ammeter |
| 345 | 96x96mm 400/500A ammeter CT Operated |
| 346 | Providing and fitting of flush type frequency meter with range 45-55Hz:(Make: Rishabh/ AE/ C&S/ BCH/ any other Reputed make) |
| 347 | Providing and fitting of 10A line current ammeter selector switch with OFF (Make: L&T/Rishabh/ AE/ Teknic/ any other Reputed make) |
| 348 | Providing and fitting of 10A voltmeter selector switch with OFF(Make: L&T/ Rishabh/ AE/ Teknic) |
| 349 | Providing and fitting of tape insulated ring type metering current transformers (Rishabh/ AE/ Crompton/ Kilburn/ any other Reputed make) as under: |
| 350 | 100/5A or 150/5A - Class 1 - Burden 5VA |
| 351 | 200/5A - Class 1 - Burden 10VA |
| 352 | 400/5A - Class 1 - Burden 15VA |
| 353 | 600/5A - Class 1 - Burden 15VA |
| 354 | 800/5A - Class 1 - Burden 15VA |
| 355 | 1000/5A - Class 1 - Burden 15VA |
| 356 | 2000/5A - Class 1 - Burden 15VA |
| 357 | Extra for 1A secondary upto 600/1A over corresponding rate |
| 358 | Providing and fitting of analog VAC hour meter(Make: L&T/any other Reputed make) |
| 359 | DIN mounting |
| 360 | Flush mounting |
| 361 | Providing and fitting of flush or projecting head push button actuator with contact block (L&T/ Teknic/ ABB/ BCH or any other reputed make) |
| 362 | Providing and fitting of LED phase indicator with surge protection (L&T/ Teknic/ ABB/ BCH or any other reputed make) |
| 363 | Providing and fitting 3 Phase, 3/4 Wire adjustable Under & Over Voltage monitoring relay (L&T SM500 or equivalent) |
| 364 | Providing, fitting and setting of 415V auto reset single phase preventor (L&T/ Minilec/ BCH or equivalent make) |
| 365 | 50V or less unbalance & 1 C/O DIN mounted |
| 366 | 50V or less unbalance & 1 C/O Panel wall mounted |
| 367 | 70V or less unbalance & 2 C/O DIN mounted |
| 368 | Providing and fitting of 32A DP switch (Anchor/ SSK or any other reputed make) |
| 369 | Providing of HRC fuses (2A - 32A) ratings |
| 370 | Providing and fitting of Fuse holders for fuses upto 32A rating |
| 371 | SUB-STATION EQUIPMENT AND OVERHEAD LINE ACCESSORIES |
| 372 | 11 kV lightening Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type |
| 373 | 33 kV Lightening Arrestor (33 kV, 10kA, Station class, ZnO, Polymer) . |
| 374 | 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance320mm |
| 375 | 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 376 | 33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm |
| 377 | 33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm |
| 378 | 11kV Gang Operated, Air Break Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type |
| 379 | 33 kV Isolator with Earthing Blade (36kV,800A, Outdoor,3 poles, 25 kA) |
| 380 | 33kV Drop Out Fuse set |
| 381 | Providing and fitting of fuse element of required current rating for DO Fuse. |
| 382 | Providing of requisite tinned copper fuse wire |
| 383 | Providing and fitting of Hot dipped galvanised MS nuts, bolts and washers of assorted sizes |
| 384 | Earthing Complete by GI Pipe 40 mm 3 mtr long through GI Strip 25x3 mm |
| 385 | Providing and fixing of 'DANGER' plate of standard size with clamps. |
| 386 | 11kV Air Break Switch/Link Set - 3-Pole, 200Amp |
| 387 | 11 kV Drop Out Fuse set |
| 388 | Supplying and erection of galvanised ‘D’ iron clamps complete with shackle insulator (75 mm X 90 mm), G.I bolts, nuts and washers, coach screws etc. as required (for LT lines). |
| 389 | TRANSFORMER/ AUTOTRANSFORMER |
| 390 | Providing new CRGO lamination to the core in place of damaged core wherever necessary including cost of materials and labour |
| 391 | Providing and fitting of finished new electrolytic grade copper wire windings with insulation in place of damaged windings including allied such as varnish and labour, drying, etc., (Both HV & LV) - per kg of winding. |
| 392 | Providing and fitting of finished new electrolytic grade copper strip windings with insulation in place of damaged windings including allied costs such as varnish and labour, drying, etc., (Both HV & LV) - per kg of winding. |
| 393 | Providing and fitting of finished new aluminium wire windings with insulation in place of damaged windings including labour costs, etc., (HV/ LV) - per kg of winding. |
| 394 | Providing and fitting of finished new aluminium strip windings with insulation in place of damaged windings including labour costs, etc., (HV / LV) - per kg of winding. |
| 395 | Rewinding with re-insulation of existing copper conductors (HV) by way of providing and replacement of inter-layer insulation - per kg of winding. |
| 396 | Rewinding with re-insulation, ducting of existing copper conductors (LV) by way of providing and replacement of inter-layer insulation - per kg of winding. |
| 397 | Rewinding with re-insulation of existing aluminium conductors (HV) by way of providing and replacement of inter-layer insulation - per kg of winding. |
| 398 | Rewinding with re-insulation of existing aluminium conductors (LV) by way of providing and replacement of inter-layer insulation - per kg of winding. |
| 399 | Providing and fitting of Hot dipped galvanised MS nuts, bolts and washers of assorted sizes |
| 400 | Supply of Neoprene Rubberized Gasket Sheet |
| 401 | 3mm thick |
| 402 | 5mm thick |
| 403 | 6mm thick |
| 404 | Providing and fitting of LV (1.1 KV) porcelain bushings of rating: |
| 405 | 250 A |
| 406 | 630 A |
| 407 | 1000 A |
| 408 | 2000 A |
| 409 | 3150 A |
| 410 | Providing and fitting of HV porcelain bushings of rating: |
| 411 | 250 A, 17.5KV |
| 412 | 630 A, 17.5KV |
| 413 | 1000 A, 17.5KV |
| 414 | 2000 A, 17.5KV |
| 415 | 250 A, 33KV |
| 416 | 630 A, 36KV |
| 417 | 1000 A, 36KV |
| 418 | 3150 A, 36KV |
| 419 | Providing and fitting of metal part stem/ bush rod with allied fittings of transformer bushings (HV/ LV) as under: Brass |
| 420 | TERMINALS/ LUGS |
| 421 | Providing and crimping of various long barrel aluminium tube lugs (Dowells/ Action/ or any other reputed make) with tapping, insulation as under: |
| 422 | 25 sq. mm |
| 423 | 35 sq. mm |
| 424 | 50 sq. mm |
| 425 | 70 sq. mm |
| 426 | 95 sq. mm |
| 427 | 120 sq. mm |
| 428 | 150 sq. mm |
| 429 | 185 sq. mm |
| 430 | 240 sq. mm |
| 431 | 300 sq. mm |
| 432 | 400 sq. mm |
| 433 | 500 sq. mm |
| 434 | 630 sq. mm |
| 435 | Providing and crimping of various long barrel copper lugs (Dowells/ Action/ or any other reputed make) with tapping, insulation as under: |
| 436 | 25 sq. mm |
| 437 | 35 sq. mm |
| 438 | 50 sq. mm |
| 439 | 70 sq. mm |
| 440 | 95 sq. mm |
| 441 | 120 sq. mm |
| 442 | 150 sq. mm |
| 443 | 185 sq. mm |
| 444 | 240 sq. mm |
| 445 | 300 sq. mm |
| 446 | 400 sq. mm |
| 447 | 500 sq. mm |
| 448 | Providing and crimping of various copper Connectors (Dowells/ Action/ or any other reputed make) with tapping, insulation as under: |
| 449 | 25 sq. mm |
| 450 | 35 sq. mm |
| 451 | 50 sq. mm |
| 452 | 70 sq. mm |
| 453 | 95 sq. mm |
| 454 | 120 sq. mm |
| 455 | 150 sq. mm |
| 456 | 185 sq. mm |
| 457 | 240 sq. mm |
| 458 | 300 sq. mm |
| 459 | 400 sq. mm |
| 460 | 500 sq. mm |
| 461 | Providing and crimping of various Aluminium connectors (Dowells/ Action/ or any other reputed make) with tapping, insulation as under: |
| 462 | 25 sq. mm |
| 463 | 35 sq. mm |
| 464 | 50 sq. mm |
| 465 | 70 sq. mm |
| 466 | 95 sq. mm |
| 467 | 120 sq. mm |
| 468 | 150 sq. mm |
| 469 | 185 sq. mm |
| 470 | 240 sq. mm |
| 471 | 300 sq. mm |
| 472 | 400 sq. mm |
| 473 | 500 sq. mm |
| 474 | 630 sq. mm |
| 475 | CABLES |
| 476 | Providing and fitting of PVC insulated 1100V flat 3-core industrial copper cable for submersible pump motors as per IS 694 as under (Makes: Finolex/ L&T/ Havells/ KEI/ Polycab/ any other Reputed make |
| 477 | 4.0 sqmm |
| 478 | 6.0 sqmm |
| 479 | 10.0 sqmm |
| 480 | 16.0 sqmm |
| 481 | 25.0 sqmm |
| 482 | 35.0 sqmm |
| 483 | Providing and fitting of XLPE insulated, 1100V single core armoured industrial copper cable as per IS 7098 as under (Preferred make: Finolex/ Gloster/ Havells/ KEI/ Polycab/any other Reputed make) |
| 484 | 16 sqmm |
| 485 | 25 sqmm |
| 486 | 35 sqmm |
| 487 | 50 sqmm |
| 488 | 70 sqmm |
| 489 | 95 sqmm |
| 490 | 120 sqmm |
| 491 | 150 sqmm |
| 492 | 185 sqmm |
| 493 | 240 sqmm |
| 494 | 300 sqmm |
| 495 | 400 sqmm |
| 496 | Providing and fitting of XLPE insulated, 1100V single core industrial armoured aluminium cable as per IS 7098 (Preferred make: Finolex/ Gloster/ Havells/ KEI/ Polycab/any other Reputed make) |
| 497 | 16 sqmm |
| 498 | 25 sqmm |
| 499 | 35 sqmm |
| 500 | 50 sqmm |
| 501 | 70 sqmm |
| 502 | 95 sqmm |
| 503 | 120 sqmm |
| 504 | 150 sqmm |
| 505 | 185 sqmm |
| 506 | 240 sqmm |
| 507 | 300 sqmm |
| 508 | 400 sqmm |
| 509 | 500 sqmm |
| 510 | 630 sqmm |
| 511 | Providing and fitting of XLPE insulated, 1100V 3.5-core industrial armoured aluminium cable as per IS 7098 (Preferred make: Finolex/ Gloster/ Havells/ KEI/ Polycab/any other Reputed make) |
| 512 | 25 sqmm |
| 513 | 35 sqmm |
| 514 | 50 sqmm |
| 515 | 70 sqmm |
| 516 | 95 sqmm |
| 517 | 120 sqmm |
| 518 | 150 sqmm |
| 519 | 185 sqmm |
| 520 | 240 sqmm |
| 521 | 300 sqmm |
| 522 | 400 sqmm |
| 523 | 500 sqmm |
| 524 | 630 sqmm |
| 525 | Providing and fitting of PVC insulated single core copper cable as per IS 694 as under (Makes: Finolex/ L&T/ Havells/ KEI/ Polycab/ any other Reputed make) |
| 526 | 1.0 sqmm |
| 527 | 1.5 sqmm |
| 528 | 2.5 sqmm |
| 529 | 4 sqmm |
| 530 | 6 sqmm |
| 531 | 10 sqmm |
| 532 | Providing and fitting of XLPE insulated, 11/11KV-E, 3-core armoured industrial Aluminium HT cable Conforming to IS 7098 (Part-2) 2011 with latest Amendments. (Preferred make: Finolex/ Gloster/ Havells/ L&T/ Polycab) |
| 533 | 35 sqmm |
| 534 | 50 sqmm |
| 535 | 70 sqmm |
| 536 | 95 sqmm |
| 537 | 120 sqmm |
| 538 | 150 sqmm |
| 539 | 185 sqmm |
| 540 | 240 sqmm |
| 541 | 300 sqmm |
| 542 | 400sqmm |
| 543 | CABLE KITS |
| 544 | Providing & fitting of Heat Shrinkable type Cable Terminations kit suitable for 3 core, 11 KV XLPE Grade Aluminium cable. (Outdoor) as per latest IS and of reputed make |
| 545 | 35-70 |
| 546 | 95-185sqmm |
| 547 | 240-400sqmm |
| 548 | ILLUMINATION |
| 549 | LED Bulbs with E27 or B22 base and illumination 3000K/ 5700K/ 6500K(Preferred makes: Havells/ Philips/ Osram Ledvance/ Eveready/ Crompton/ Syska/ Bajaj/ Andslite) |
| 550 | Providing, installation and testing of die-cast aluminium floodlight LED, colour temperature 5000 to 6500K, IP65 (Preferred makes: Havells/ Philips/ Osram Ledvance/ Crompton) |
| 551 | Street-lighting: Outdoor pressure die-cast aluminium IP66 roadway luminaire (streetlight) with high power LED as light source(Preferred makes: Havells/ Philips/ Osram Ledvance/ Crompton) |
| 552 | PORTABLE LIGHTING |
| 553 | 3 W Rechargeable LED torch (Preferred make: Havells/ Eveready/ Andslite/ Philips/ Syska) |
| 554 | LED Lantern with Twin Charging mode – Charging Cable & Solar Panel (included) (Syska/ Havells/ Andslite/ Philips/ Bajaj) |
| 555 | CONSUMABLES |
| 556 | Providing and filling of transformer oil conforming to IS 335 (Makes: Power oil/ Indian Oil Servo/ HPCL/ any other reputed make) |
| 557 | Filtration & demoisturizing of Transformer-oil (on site) |
| 558 | Providing and filling of Engine oil (make Castrol, shell, mobil ) required for DG set |
| 559 | Distilled water |
| 560 | coolant( scaling and deposits resistance confirming to BS6580, make: castrol, gulf, shell) Please Enable Macros to View BoQ information |
