|
| 1 | Demolition of Brickwork or stone masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed |
| 2 | Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thk (unreinforced) for plinth protection,sub base and foot path complete all as specified and directed. |
| 3 | M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling, mass concrete complete all as specified and directed. |
| 4 | M&L for Pre-cast cement concrete block(Type B1 1:2:4 20 mm graded aggregate ) masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick in cm 1:4 on brick masonary surfaces and finished the even and fair without using extra cement complete all as specified and directed. |
| 6 | M & L For PCC type B-1, 1:2:4 (20mm graded stone aggerates) as in coping and the like complete all as specified and directed |
| 7 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer ,as per manufacturer's specification complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) complete all as specified and directed. |
| 9 | M&L for Endura Industrial tiles 10mm thick (square/rectangular) area of each tiles exceeding 0.09 sqm but not exceeding 0.18 sqm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured to match incl 20mm thick screed bed in CM 1:6 complete all as specified and directed |
| 10 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand complete all as specified and directed. Make: (Topaz tiles/ NITCO/ Mehtab tiles(Indore) or equivalent from approved list of makes by EinC Dept) |
| 11 | M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling, mass concrete and sub base of floor complete all as specified and directed. |
| 12 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.to be fixed in road side kerbs of size 30x45 cms of minimum thickness 10 cms complete all as specified and directed. |
| 13 | M & L PCC 1:3:6 type C-1(20mm graded aggregate), 75mm thick as in plinth protection,flooring with Surface finished fair and smooth without using extra cement complete all as specified and directed. |
| 14 | Taking down cement plaster on brick or stone walls or ceiling surfaces etc including raking out joints hacking for key scrubbing down with water and include for all necessary lowering, etc., removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plasteringcomplete all as specified and directed. |
| 15 | M&L for preparation of old decorated plastered or unplastered surfaces, including washing, rubbing down and stopping of distempered and painted surfaces with complete removal of existing treatment over external walls. Note : 1. Washing and Removal of existing treatment shall be carried out by mechanized means and by jet washing (90-150 bar) as required and directed by Engr-in-Charge |
| 16 | M&L for applying of two coats of cement base paint over a coat of primer to the walls complete all as specified and as directed by Engineer-in-Charge. |
| 17 | M&L for applying two or more coats on old surfaces with 100% premium acrylic emulsion paint having VOC content less than 50 gms/litre and UV resistance as per IS 15489:2004, alkalie and fungal resistance, dirt resistance, exterior paint of required shade with silicon additives @ 1.43L/10sqm over and including priming coat of exterior primer applied at 0.9L/10sqm complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for 15mm thick external plastering in CM (1:4) with water proofing compound on fair faces of bricks or concrete surfaces finished even and smooth w/o using extra cement complete all as specified and directed. (Water proofing compound will measured and paid separately) |
| 19 | Supply only integral water proofing compound complete all as specified and directed. |
| 20 | Supplying and laying of 110mm PVC pipe in repairs single socketed in any length with rubber ring joints laid fittings on walls/ceiling or laying in floors complete all as specified. |
| 21 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer ,as per manufacturer's specification. Please Enable Macros to View BoQ information |
