|
| 1 | Excavation in foundation in ordinary soil (loam, clay, or sand) including lift upto 1.5 m and lead up to 30 m and including filling watering ramming of excavated earth in to the trenches or in to the space between the building and the sides of the foundation trenches or into the space between the building and the side of the foundation or in the plinth and removal & disposal of surplus earth as directed by E/I upto a distance of 30m.from the foundation trenches. Manual Work |
| 2 | Providing and laying cement concrete in 1:3:6 (1 Cement: 3 coarse sand :6 gladed stone aggregate 40 mm nominal size) and curing complete, lncluding cost Cu. M. 1160.00 5900.00 of form work in Foundation and floors. |
| 3 | Providing and laying cement concrete in 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) and curing complete, lncluding cost of form work. ln Foundation and floors |
| 4 | Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abulments, posts and struts etc. including cost ofcentering, shuttering, finishing and excludingreinforcement:1:1.5:3 (1 cement: 1.5 coarse sand :3graded stone aggregate 20 mm nominal size) |
| 5 | RCC work Providing and laying in position specified grade of reinforced cement concrete,Slab including the cost of centering, shutterang, finishing and excluding reinforcement - Above plinth level upto fifth floor lable :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone) |
| 6 | Class-150 (Non Modula0 brick work in 1:3 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 7 | 15 mm Cement plaster with cement mortar in proportion of 1:3 cement &.coarse sand of single coat for exterior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. ln girth and finished even and smooth. |
| 8 | Providing and laying Ceramic non skid floor tiles of size 300x3OO mm (thickness to be specified by the manufacturer) of 1st quality conforming tq lS : 15622 of approved make in colours such as White, lvory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the ioints with white cement and matching pigment etc., complete. |
| 9 | Providing and laying Vitrified tiles in 500x500mm sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to lS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to lS: 15477, in average 6 mm thickness, including grouting ofjoints (Payment for grouting ofjoints to be made separately). |
| 10 | White Washing with lime on undecorated wall surfaces (Three or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drop and loose scales of lime wash and other foreign matter |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 12 | Sand filling in plinth including supply of necessary quantity of local sand from a distance not exceeding 8 Kms from the site of work and including watering dressing etc. required for proper completion of work. |
| 13 | Black Granite (Polished) in big slab 18mm thick |
| 14 | SITC of Monoblock type submersible pump set of 10HP Capacity (Three phase, 50Hz,415‐380V AC) of Kirloskar/Crompton Greaves/ Texmo Make. Suction filter for pump: Filter body & filter mesh madefrom AISI 304 standard stainless steel. Gate Valve & NRV of C.I./GM on pumpset delivery(Sant/Zoloto/Leader make ISI Mark).Indoor type electrical panel for 10HP mono-submersible pumpset:Mild steel (Epoxy powder coated) enclosure (Made from 16 SWG Mild Steel sheet) consists of motor main switch,ammeter, voltmeter, single phase preventer, selector switch, Terminal connector, Start-Stop Switches, indicating lampsetc. complete with internal wiring.Copper conductor flexible cable for pump- 2.5sqmm x 3 core. (Make:Havells/Finolex/Polycab/Equivalent) |
| 15 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm lvl.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineerin-Charge. |
| 16 | Providing and Fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x '19 mm for styles and 15x1 5 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufa.ture M S frame covered with 5 mm thick heat moulded PV')'C'channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shatl be tapered on both sides to form lock rail. and lock rails shall be provided both side of the panel, 10 mm (5 mm x 2 ) thick,20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mmr2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. Top, bottom and lock rails shall be provided both sides of the panel. 1O mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the l\4 S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge manufacturer's specification & drawing. |
| 17 | Brick Ballast |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work. 50 mm nominal outer dia. Pipes. |
| 19 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 20 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 21 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 22 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern |
| 23 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 25 | Main Panel and distribution box: Distribution equipment shall be outdoor type (IP 55), as applicable, and shall be painted in accordance with other equipment within the same area of mounting or painted to suit the ambience. The components inside these distribution equipments shall be of reputed make and the quantities shall be such that there is at least 10% redundancy on the main equipment. Outgoing terminals of the main distribution board shall be of heavy duty while the incoming / outgoing terminals of all other distribution equipment shall be screw less terminals of high standard. Distribution Boxes Junction shall be IP 55 made out of 2 mm thick MS sheet powder coated with screw less clip-+-on terminals / or else specified and double compression glands complete as required or as specified. Cubical panel shall be fabricated out from Cold rolled close annealed (CRCA) sheet with required bracings and supports, gasket with foam rubber to make the panel dust and vermin proof, together with degreasing and applying two coats of red oxide and two coats and stove enamel paint. The main panel thickness of steel sheets shall be 16 SWG. (Customised) the specification are as under : 300Amp copper bus bars, and including the following: RYB Phase Indicator, Amp and Volt meter complete in all respect with following accessories etc as requiredMain Incoming : 200Amp. 36kA, FP MCCB - 1No.Main Outgoing : 63Amp 16kA, 4P MCCB- 5 Nos.Din bar mounting MCBsOutgoing : 32Amp DP 30mA ELCB/RCCB - 5 Nos. 5Amp. to 32Amp. rating, 240/415 V, 10kA, \\"C curve, - 20 Nos\\" |
| 26 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer- Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.3.5C X 70 sq. mm |
| 27 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer- Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.3.5C X 35 sq. mm |
| 28 | Supply and laying of Copper conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer- Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.4C X 4 sq. mm |
| 29 | Supply and laying of Copper conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer- Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.3C X 2.5 sq. mm |
| 30 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3.5C X 70 sq. mm |
| 31 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3.5C X 35 sq. mm |
| 32 | Supply and fixing of ring or pin type lugs to the cable leads as required, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.:4 sq. mm Copper |
| 33 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required., 63 mm dia (CD-63 mm & ID-51 mm nominal) |
| 34 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required., 90 mm dia (CD-90 mm & ID-76 mm nominal) |
| 35 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 36 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 37 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 38 | Supplying, erecting, testing and commissioning outdoor duty floor mounted weather proof IP66 feeder pillar fabricated as detailed above but with double door (lockable outer door), sloping roof, water run-off gutter on three sides as per approved drawing, entire unit mounted on 50mm x 50mm x 6mm angle iron with minimum 300mm long \\"\\"legs\\"\\":\\" Feeder Pillar 1 Incomer: 1nos 63A TPN MCB 2 set of three phase indicating lamps with suitable protection. \\"Busbar: Equally sized three phase and neutral copper conductors busbar suitably sized to carry 100A current and suitably insulated with colour coded Heat Shrink Sleeve.\\" Outgoings: 2nos 25A TP Contactor each with set of 6nos 10A SPN MCBs 2nos 24 Hour Timer with auxiliary contacts to close above contactor. 4nos 10A TP MCB |
| 39 | Installation, testing and commissioning of 40W ww Source Wash Light with the Following Specification : Max Power - 40W, Voltage - AC100~240V, Minimum Light efficiency (lm/W) > 45 lm/w, Standard Optical System - 12°/30°/45°/60°/12*50°/15*50°, LED Colour Temperature : 3200K , Operating Temperature : - 10°C~+50°C Fast Colour Pickup - 24 In- Built Presets, Impact Projection - IK10, Ingress Protection - IP67, Protocol - DMX + RDM (LBT/ALT/DTS/Vak) |
| 40 | Supply, Installation, Testing and Commissioning of sqsquare /round pillar 10 W LED Bollard Light with mounting base accessories having LED operating life >50000 burning hours, Input Voltage range of 160V-260V, Working temperature -10deg - 60 deg C, colour temprature should be 3000K/4000K/6000K, Good Thermal management System with inbuilt drivers. Corrosion resistant aluminum cast housing and Ingress Protection IP66. (LBT/ALT/DTS/Vak) |
| 41 | Seaforthia Palm having ht. 1.50 m to 1.80 m with 12-15 suckers, well developed, fresh and healthy lush green leaves from bottom to top in 30 cm size of Earthen pot / Plastic pot. |
| 42 | Providing and stacking of Ficus nuda of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge. |
| 43 | Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge. |
| 44 | Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 45 | Providing and stacking of Polyalthia longifolia (Ashok) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 46 | Providing and stacking of Passiflora caerulea (Rakhi bel) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge |
| 47 | Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge. |
| 48 | Providing & laying Of grass & hedges with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer in charge |
| 49 | SITC of Sprinkler system with suitable HDPE / uPVC pipes with brass nozzles and allied accessories, complete in all aspects |
| 50 | Design, supply, fabrication, installation, finishing and commissioning of thematic Braj Sahitya entrance gateway of overall height minimum 4 m from finished ground level, with approx. overall width 5.5 m comprising MS structural framework made from box/plate sections, decorative laser-cut / CNC-cut MS jali panels at top and sides, integrated cut-out / mounted signage lettering \\"Braj Sahitya Park\\", side piers clad with FRP/GRC / textured panels, complete anchor bolts, grouting, alignment, all welding, cutting, lifting and fixing, finished with exterior-grade PU / powder coating / paint in approved heritage colour, including all materials, labour, tools, accessories and incidentals, complete in all respects as per approved drawings. |
| 51 | Design, supply, fabrication, installation and commissioning of “Ashtachāp Plaza” sculptural installation, featuring a standing artistic centerpiece inspired by a mandala form representing the eight poet-saints of the Bhakti era, creating a contemplative public space for visitors, comprising a central multi-petal sculptural form fabricated in MS / weathering steel (as approved) with laser-cut engraved names and verses, subtle mandala surface patterns, integrated concealed lighting to highlight form and inscriptions, mounted on a raised MS / RCC pedestal with stone / granite finish, surface treatment, anti-corrosive protection, PU / exterior-grade finish, all fabrication works, testing, alignment, safety provisions and finishing, complete in all respects as per approved drawings, Overall height of approximately 4 m including pedestal, comprising a central mandala-inspired sculptural form of about 3.2–3.5 m height and 4.0 m overall diameter (petal tip to petal tip), mounted on a stone-finished MS/RCC pedestal of 1.0–1.2 m height with an approximate plan size of 4.5 m × 4.5 m (or Ø 4.5 m), and positioned within a recommended minimum clear plaza area of 10 m × 10 m to allow proper viewing, circulation and contemplative use. |
| 52 | Design, supply, fabrication, installation, finishing and commissioning of freestanding illuminated signage totem, of approximate overall size 2.4 m height × 0.9 m width × 0.25 m depth, comprising MS structural body fabricated from box sections and plates, front face with backlit graphic panel / acrylic / displaying portrait, text and QR code as approved, integrated LED illumination with driver, internal wiring and access provision, mounted on MS base frame with RCC foundation, anchor bolts and grouting, finished with PU / powder coating in approved colour, including all materials, electrical connections, civil works, testing, alignment, safety provisions and incidentals, complete in all respects as per approved drawings, design intent and site conditions, measured and paid as 1 No. on lump-sum basis |
| 53 | Design, supply, fabrication, installation, finishing and commissioning of linear heritage information signage panels, arranged in a series, each unit of approximate overall size 3.0 m height × 1.0 m width × 0.30 m depth, comprising MS structural frame fabricated from box sections and plates, front face with engraved / etched / laser-cut text panels in MS / ACP / stone / acrylic as approved, illuminated graphic display panel at top with integrated LED backlighting, concealed LED strip lighting along vertical edges for accent illumination, complete internal wiring with drivers and access panels, mounted on MS base frame with RCC foundation, anchor bolts and grouting, finished with exterior-grade PU / powder coating in approved colour, including planter integration at base (if required), complete in all respects as per approved drawings, design intent and site conditions, measured and paid as per No. on lump-sum basis |
| 54 | Supply, installation, testing and commissioning of Outdoor multi-play system designed for children aged 3–12 years, comprising interconnected play towers with multiple slides, climbing, balancing and bridge play activities. play system has an overall size of approximately 37.8 m × 44.11 m × 16.8 ft (L × W × H), structure includes roto-moulded LLDPE slides, roofs and play panels manufactured from UV-stabilized virgin material for long-term outdoor durability. Platforms and stair treads are made of precision-punched galvanized steel sheets with powder-coated finish for anti-skid and corrosion resistance, while handrails are fabricated from galvanized pipes with powder coating. The system is supported on heavy-duty 114/89 mm diameter galvanized steel posts, powder coated for enhanced life. Safety features include slide entry gate panels, nylon clamps for secure panel installation, and swing elements with durable rubber seats, triangular hooks and PVC-coated chains. Decorative HDPE elements with colour-fade resistance, complete system/setup. Make OKplay/Kidzlet/funplay |
| 55 | Design, supply, fabrication, installation and commissioning of “Braj Leela Sculpture Grove” artistic installation, comprising a series of cylindrical sculptural columns inspired by Braj Leela narratives, each column of approximate overall minimum height 2.5 m and diameter 0.75 m, fabricated in MS / weathering steel with laser-cut perforated text and motifs, internally illuminated with warm white LED light creating patterned light projections on the surrounding landscape, including all structural framing, anti-corrosive treatment, exterior-grade finish, internal wiring, drivers, earthing, testing and safety provisions, arranged as a contemplative grove within landscaped areas, complete in all respects as per approved drawings, design intent and site conditions. |
| 56 | Design, supply, fabrication, installation and commissioning of laser-cut sculpture panels, inspired by Braj / Vrindavan Leela themes, each panel of approximate size 2.4 m height × 1.5 m width, fabricated from MS / weathering steel sheets with intricate laser-cut artwork, supported on MS box-section framing with base plates, integrated warm white LED uplighters to create art and shadow effects, including anti-corrosive treatment, exterior-grade PU / powder-coat finish, testing and safety provisions, complete in all respects as per approved drawings, design intent and site conditions. |
| 57 | Design, supply, fabrication, installation and commissioning of linear Cut-profile artwork installation, depicting Braj / Leela narrative figures in sequence, fabricated from MS / weathering steel laser-cut profile panels of approximate individual height 1.2–1.5 m, mounted continuously on MS flats / channels with concealed base plates fixed to RCC pedestal or ground foundation, forming a continuous artwork length as per site requirement (approx. 20–30 m per stretch), including all structural supports, anchor fasteners, anti-corrosive treatment, exterior-grade finish, alignment, safety provisions and incidentals, complete in all respects as per approved drawings, design intent and site conditions. |
| 58 | Design, supply, fabrication, installation and commissioning of an open-book themed sculptural installation, symbolizing knowledge and literary heritage, comprising a giant open book form of approximate size 4.0 m length × 2.5 m width × 2.2 m height, fabricated using MS structural framework with FRP & stone-textured panels forming book pages and cover, engraved / embossed text on pages as approved, mounted on raised RCC / stone-finished plinth foundations, structural supports, surface finishing, anti-corrosive treatment, exterior-grade paint / coating, complete in all respects as per approved drawings, design intent and site conditions. |
| 59 | Design, supply, fabrication, installation and commissioning of outdoor Biographical illuminated interpretation panels depicting cultural, historical and educational narratives, comprising vertical display panels of approximate size 1.2 m (W) × 2.4 m (H), mounted on MS structural posts fixed into RCC foundations. Each panel shall consist of printed / engraved / laser-cut graphics and text on durable substrate such as / acrylic / metal sheet with heritage-themed illustrations and approved content, housed within MS framing with integrated warm-white LED edge / back lighting. Including internal wiring, concealed fixtures, drivers, IP-rated electrical components, anti-corrosive treatment to MS members, exterior-grade paint / powder coating. |
| 60 | Design, supply, fabrication, installation and commissioning of reading-themed FRP sculptural installation symbolizing knowledge, learning and literary heritage, comprising seated human-form sculptures in contemplative postures, each depicted reading an open book. Each sculpture shall be of approximate size 1.4 m (L) × 1.2 m (W) × 1.5 m (H) in seated position, fabricated using MS structural framework clad with FRP / stone-textured panels with natural earthy finish, including sculpted body forms, facial features, attire detailing and open book elements with engraved / embossed text or motifs as approved by the Engineer-in-Charge. |
| 61 | Design, supply, fabrication, installation and commissioning of gazebo symbolizing learning and community interaction, square pavilion structure of approximate size 5.0 m × 5.0 m plan area with an overall height of about 3.5 m, fabricated using MS structural framework including columns, beams and roof members, finished with exterior-grade protective coating. The pavilion shall be covered with a lightweight roof system as approved, and fitted with decorative laser-cut / CNC-cut panels depicting literary motifs, scripts or cultural patterns on all sides as per approved designs. The installation shall include integrated seating platforms / benches, internal paving, , anti-corrosive treatment, surface finishing, exterior-grade paint, and all associated finishing works, complete in all respects. |
| 62 | SITC of 1-chip DLP LASER Phosphor Multimedia Projection system having, Min 9600 Lumens 20000 hours lamp life, 1920 x 1200 WUXGA Native Resolution, Inbuilt blending and warping with automatic caliberation software, 3D ready, 3000000:1 Contrast Ratio, inputs: HDBaseT,HDMI2.0, DVI-D, Active 3D, Min offset Vertical +/- 100% Horizontal +/- 50%, Motorised zoom and focus, alongwith 0.65-0.75 lens & projector mountin bracket etc. complete with installation as per the site requirement. Make: Christie/Casio/NEC/DP |
| 63 | SITC Projection housing enclosure Interface for setup and monitoring of temperature, humidity and status indicators. Power control circuit with PID Management system compitable with the projection housing unit and display unit. Assembly and mounting of projector as per site plan with cables, mounting brackets and tilt/pan arrangement systems for projection layout. Make Tempest/ Vizbox/ Banso/Customized |
| 64 | SITC of Holographic Projection Screen minimum 10X6 (WXH) in meter color :grey/black screen should be support Aspect ratio 16:9/16:10 support Multi-Point Hanging system . Make Customized |
| 65 | SITC Media Server- Intel Core i9 Series Processor or above with following minimum specifications, 16 GB RAM system memory, Minimum 1TB SSD storage, Dedicated 8 GB Graphic card (NVIDIA/AMD), CD Rom, DVD ROM, USB 3.0 interface with 4 USB ports, Wireless key board, Wireless mouse with licensed loaded Window 8/10, LAN, Audio Jack, VGA port, Line in - Line out and Video Output DVI,HDMI etc. Make Dell/HP/lenovo |
| 66 | SITC of Flat 42\\"LED Display Monitors with Optimal Resolution of 4K at 60 Hz having Brightness 250 cd/m² (typical). CONNECTIVITY 1 Digital Visual Interface connectors (DVI-D) Panel Technology: VA ,Native Contrast Ratio: 4000:1 ,Operating System: Tizen , Protection Level: IP5X ,Orientation Options: Landscape and Portrait, Manufacturer must have an R&D center in India, & maintain an authorized service centre for at least the past 3 years (legal documentation required). Manufacturer must provide a dedicated 24x7 toll-free support number. Dell/ HP/ Samsung |
| 67 | Supply, installation, testing and commissioning of 10 kVA Online UPS, double-conversion type with IGBT-based PWM rectifier and inverter, input 3-phase / output 1-phase or 3-phase as required, suitable for 230/415 V, 50 Hz operation, having input power factor ≥0.99, output power factor ≥0.9, THDi <5%, static bypass, maintenance bypass, LCD/LED display, SNMP/RS-485 communication, complete with maintenance-free VRLA / SMF batteries sized for minimum 15 minutes backup at full load (or as specified), battery rack, interconnecting cables, protections, earthing, testing, commissioning and user training, complete in all respects as per site conditions |
| 68 | SITC of Media Production Software for Multi media show. Lisence & other fees are inclusive in this rates and shall be borne by bidder. Watchout/ Resolume/ Vioso/heavyM |
| 69 | Development of Content on Braj Sahitya, including research, concept development, scriptwriting and storytelling covering the history, evolution and significance of Braj Sahitya with focus on major poets, literary forms and cultural context, preparation of accurate and engaging text in Hindi/Braj (with English translation where required), content structuring for panels, audio-visual media, digital displays and interactive platforms, along with proofreading, fact verification, copyright clearance, revisions based on client feedback and final submission in editable and print-ready digital formats, complete in all respects as per project requirements. |
| 70 | Supply, installation and commissioning of Porta Cabin, minimum size 3.0 m × 3.0 m, fabricated from factory-made insulated panels with MS structural frame, complete with one office table and chairs, 2 ton conditioner, internal electrical wiring with LED lights, switches and sockets, vinyl/ply flooring, door and windows, ventilation, painting, transportation, placement, testing and commissioning, complete in all respects as per site requirements. |
| 71 | Programming of Multimedia Content, including software-side programming, sequencing and synchronization of audio, video, graphics and animations, integration with displays, projectors, sensors or control systems, testing for performance, stability and accuracy, debugging, fine-tuning, on-site deployment, operator training and final commissioning, complete in all respects. |
| 72 | Supply, installation, testing and commissioning of AV Accessories, including all required interconnecting cables (HDMI/DP/VGA/audio), connectors, adapters, splitters, extenders, wall plates, racks, power strips, surge protectors, mounts/brackets, interface accessories as applicable, complete with proper dressing, labeling, , integration with AV systems, testing and handover, complete in all respects as per site requirements. |
| 73 | Audio Guide QR Code type |
| 74 | Content development for 3min per personality (20*3 = 60 min) including web server cost etc. |
| 75 | Kiosks: Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including Sandwitched puff panel roofing with Wall AAC Block finish with 12 mm 1:4 ratio plaster as per detail drawing by Architect (Work includes False ceiling, Paint work, flooring and facade work) |
| 76 | Sub Total (A) |
| 77 | Add / Deduction For Estimate Figure Amount Match |
| 78 | Grand Total Please Enable Macros to View BoQ information |
