|
| 1 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge. |
| 2 | Providing and fixing in position of 3 seater designer benches of approved design & make or minimum area 1.5 mtr x 0.60 mtr. Over all minimum height 0.80 mtr consisting of FRP channel strip -seat back with ent cap (C-section of thickness up to 5mm, 1200 mm long with wooden finish bolted to side frames ). BENCH FRAME(cast iron designer frame conforming to IS 1730 made from sand casting method ) |
| 3 | Iron work wrought & put up in trusses as per direction of Engineer-in -charge including cost of all labour, T & P, cost of all materials required for the work. |
| 4 | Supply, fitting & Fixing G.C.I. Sheet (Durashigne Coloured sheet 0.6mm thick) of approved quality in roofing drilling holes in wind ties with “L” or “J” hooks and bitumen and G.I. Washer etc. and ridges as required for the work including cost, conveyance and other taxes of all materials cost of all labour T&P articles required for the work etc. complete in all respect as per direction of the Engineer – in – Charge. |
| 5 | Fixing tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete. |
| 6 | Painting two coats with enamel paints of approved shade over a coat of primer in all floors to iron / wood work including sand papering, polishing the surface, including cost, conveyance, royalties and all taxes of all materials along with T & P required for the work including cost of paints etc. complete in all respect. |
| 7 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 8 | Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment). |
| 9 | Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment). |
| 10 | Fine dressing of the ground |
| 11 | Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately). |
| 12 | Providing and transplanting best quality Shrubs and Hedges species native/ drought tolerant species or as per the owner’s choice of approx. height 450-900mm in erect position without breaking the earth balls around the roots, packing the soil tight around the plant and water properly, including preparation of beds for hedging and shrubbery by excavating 600 x 600mm deep, pits dug a few days in advance, top soil with manure (compost) 2 :1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per the suppliers specifications, flooding with water, dressing including removal of rubbish and surplus earth if any with all leads and lifts etc, all complete. All shrubs to be approved before planting inclusive of maintenance as specified for one year after planting including rectification/ replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required etc. all completeBougan villa |
| 13 | pandanus |
| 14 | Ixona |
| 15 | Cana indica |
| 16 | wadelia |
| 17 | Grassing with ‘Selection No. 1’ grass including transplanting the Grass with 75 mm spacing on either side, watering and maintenance of the lawn as required (during initial development of 15 days or more, watering is to be done every day) till the grass forms a thick lawn free from weeds and fit for mowing, including watering and maintenance of the lawn as required etc. for a period of one year after planting, all complete. |
| 18 | Planting best quality pot-grown healthy Ornamental species [Agave spp., Bamboo buddha belly, Bismarckia nobilis, Cycas circinallis, Cycus revoluta, Furcarea watsoniana, Golden bamboo, Phoenix roebelenii, Phoenix sylvestris, Sansveira spp., Washingtonia robusta, Wodyetia bifurcata, Roystonea regia (Royal palm) or any other native/ drought tolerant species or as per the owner’s choice] of approx. height 1500-2500mm in erect position with minimum stem of species in erect position without breaking the earth balls around the roots, packing the soil tight around the plant and water properly, including preparation of beds by excavating 1200 x 1200 mm deep, pits dug a few days in advance, top soil with manure (compost) 2 :1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) along with Urea, N.P.K. mixed in proportion as per the suppliers specifications flooding with water, dressing including removal of rubbish and surplus earth if any with all leads and lifts etc, all complete. All plants to be approved before planting inclusive of maintenance as specified for one year after planting including rectification/ replacement of any damaged work or plant, watering at required frequency, providing and laying manure as required etc. all complete.Fox tail palm up tp 12 ft ht |
| 19 | water lily Please Enable Macros to View BoQ information |
