|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., All kinds of soil.DSR 2023- 2.8.1 |
| 2 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material., Beyond 60 cm girth up to and including 120 cm girth DSR 2023- 2.33.2 |
| 3 | Construction of Subgrade with Material Obtained from Borrow Pits (For Carted Earth Work) Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 20Km. as per Technical Specification Clause 301.5, |
| 4 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.DSR 2023- 2.31 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).DSR 2023- 4.1.8 |
| 6 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing., 1:1½:3 (1 Cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).DSR 2023- 4.4.1 |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand)DSR 2023- 6.1.1 |
| 8 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR 2023- 13.91 |
| 9 | 12 mm cement plaster of mix :, 1:4 (1 cement: 4 coarse sand) DSR 2023- 13.4.1 |
| 10 | \\"PROVIDING AND FIXING OF FUN ROWER FUNPLAY FNF 003 HAVING DIMENSION: • PRODUCT AREA : 4.7 FT X 2.5 FT • SAFE PLAY AREA : 8.7 FT X 6.5 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS BACK MUSCLES, SHOULDER ARM MUSCLES AND ABDOMEN, ALSO IMPROVES CARDIO VASCULAR ENDURANCE. TECHNICAL SPECIFICATIONS: MAIN FRAME: 80 NB GI B-CLASS PIPE JINDAL MAKE SEAT FRAME:50 NB GI B-CLASS PIPE -JINDAL MAKE HANDLE FRAME:32 NB GI B-CLASS PIPE -JINDAL MAKE PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS BEARINGS:PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. sanction rate attached |
| 11 | \\"PROVIDING AND FIXING OF TWISTER THREE WAY FUNPLAY FNF 009 HAVING DIMENSION: • PRODUCT AREA : DAIMETER 5.5 FT • SAFE PLAY AREA : DIAMETER 11 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS ABDOMINAL MUSCLE TECHNICAL SPECIFICATIONS: MAIN FRAME : 100 NB GI C-CLASS PIPE -JINDAL MAKE HANDLE FRAME: 20 NB GI B-CLASS PIPE JINDAL MAKE TWISTER DISC: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\"\\" X 1.5\\"\\". PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. sanction rate attached\\" |
| 12 | \\"TAI CHI SPINNER DIMENSIONS: PRODUCT AREA: 3.3 FT X 2.5 FT SAFE PLAY AREA: 7.3 FT X 6.5 FT FUNCTIONS: IMPROVES SHOULDER & HELPS IMPROVES WRIST ALIGILITY TECHNICAL SPECIFICATIONS: MAIN FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE HANDLE FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE SPINNING RING: LLDP ROTOMOULDING WHEEL, PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN:SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. BEARINGS: PERMANENT SEALED OF REED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS. POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED\\" |
| 13 | \\"PROVIDING AND FIXING OF DOUBLE ARC SWING-FPSPCL33 HAVING DIMENSIONS: PRODUCT AREA: 9.3’ X 3.5’ SAFE PLAY AREA: 13’ X 13’ TOP BAR IS MADE UP OF 50 NB G.I B-CLASS PIPE HAVING 2 SETS OF BEARING ASSEMBLY & PROFILE PLATE AT END. THE LENGTH OF TOP BAR IS 2.8M LONG. SIDE FRAME IS MADE UP OF 80 NB G.I B-CLASS PIPE HAVING 2 NOS. SIDE FRAME IS BEND ONE PIECE IN U-SHAPE. SPECIAL DESIGN PIPE CLAMPS HOLD CASTING ASSEMBLY OF BEARINGS. IT GIVES NOISELESS AND SMOOTH MOVEMENT TO THE SWING. ROUND COBALT COATED SHORT LINK CHAIN OF 8MM DIAMETER (ELECTRIC BUTT WELDED) AS PER ISI: 2429, WHICH CAN CARRY A WEIGHT OF 400 KG. THE CHAIN IS RUBBERISED COATED .S.S S-HOOK IS USED TO HANG CHAIN IN RUBBER BELT. SEAT IS MADE UP OF RUBBER WITH NON-SKID SURFACE WITH NYLON LINING IN SANDWICH PATTERN. BELT SEAT SHOULD BE 13MM THICK. S.S. TRIANGULAR HOOK IS MOULDED IN BELT IN SUCH A WAY THAT IT WON’T PROJECT FROM THE TOP SURFACE OF THE BELT SEATS. ROTO MOULDED LLDPE PLASTIC SPARROW CHARACTER IS FIXED ON TOP BAR COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. santioned rate attached. santioned rate attached. |
| 14 | PROVIDING AND FIXING OF AIR WALKER DIMENSION: PRODUCT AREA :4.8 FT X 2.1FT SAFE PLAY AREA :8.8FT X 6.1FT AGE GROUP: 13 ABOVE YRS. FUNCTION: STRENGTHENS LEG MUSCLES, IMPROVES CARDIO VASCULAR ENDURANCE TECHNICAL SPECIFICATIONS: MAIN FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE LEG FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE FRAME: 25 NB GI B-CLASS PIPE -JINDAL MAKE FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE END CAP: GALVANISED CAP. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS, IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. NUT BOLTS: GALVANISED NUT BOLTS, BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT DONE BY FIRST COAT OF PRIMER - JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS, TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE Sanctioned Rate |
| 15 | CHEST PRESS DIMENSIONS: PRODUCT AREA:3.6 FT X 2.8 FT SAFE PLAY AREA :7.6 FT X 6.8 FT FUNCTIONS: STRENGTHENS GLUTES, CHEST, SHOULDER. UPPER & MID ABS, FORE ARM & TRICEPS TECHNICAL SPECIFICATIONS: CENTER FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE MAIN FRAME: 40 NB & 32 NB GI B-CLASS PIPE JINDAL MAKE HANDLE FRAME: 32 NB & 25 NB GI B-CLASS PIPE-JINDAL MAKE CONNECTING PIPE: 32 NB & 25 NB & 40 NB GI B-CLASS PIPE- JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. BEARING HOUSING AND PIN SEAMLESS PIPE & ROUND BAR BEARINGS: REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 |
| 16 | CYCLE DIMENSION: PRODUCT AREA: 3.2 FT X 2.2 FT SAFE PLAY AREA:7.2 FT X 6.2 FT FUNCTIONS: STRENGTHEN UPPER & LOWER LIMB, IMPROVES BODY CONSISTENCY & EGIBILITY, IMPROVE LUNGS & HEART EFFICIENCY AND STRENGTHENS HEART. TECHNICAL SPECIFICATIONS: MAIN FRAME: 25 NB & 40 NB GI B-CLASS PIPE -JINDAL MAKE SEAT FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE & SEAT: LLDPE STERING IS USED PIPE CAP: GALVANISED CAP. BEARING HOUSING AND PIN SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS. BEARINGS PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. |
| 17 | |Supply & Fixing of Swing 4 seater SW-2 including cost of swing seater (shape & size attached witth estime) fixing the swing seater including excavation PCC 1:4:8 cement C0arse sand & 40 mm nominal gnt with CC 1:2:4 cement coarse sand & 20 mm gauge stone gnt incduding all material & labour required fixing and onenting etc all complete under the direction of the EN, Sanction Rate |
| 18 | Supply & fixing of wave slide (m) four seater SD-05B (height6\\") including cost of| wave slider (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal gnt with CC 1:2:4 cement coarse sand & 20 mm gauge stone gnit including all material & labour equired fìng and onienting etc all complete under the direction of the Engineer.S/R |
| 19 | 'Supply & fixing of MS benches including cost of benches (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal grit with CC 1:2:4 cement coarse sand & 20 mm gauge stone grit including all material & labour required fixing and orienting etc all complete under the direction of the E'/I. Sanction Rate |
| 20 | SF of FRP DAKOCO vpes big size designer dustbin of approved quality approved by El etc made of polycorbonate or equvalent materials with including differont otourtull colours of 3X1/2*X2\\" dia size etc including cartage of dustbin contractor their won sources etc including supply of all materials T &P all complete work (S/R) |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:, Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.DSR 2023- 13.62.1 |
| 22 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 2023- 13.80 |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour:, Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: New work (two or more coats) over and including Water thinnable priming coat with cement primer having VOC content less than 50 gram/litre.DSR 2023- 13.41.1 |
| 24 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.DSR 2023- 16.83 |
| 25 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layer with motor graded on perpared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratoy roller to achieve the desired density complete as per clause 401. for grading I material (GSB-1) (Sanction rate) |
| 26 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge., 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern.DSR 2023- 16.91.2 |
| 27 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DSR 2023- 15.56 Please Enable Macros to View BoQ information |
