|
| 1 | Providing and fixing modular L shaped work station of size 1700mmx1400mm in length, and width of 600mm( front side 500mm+100mm projection ) and 450 mm other side, 750mm height up to writing platform( including bush of 25mm thick) using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587(Preferable brands Action tesa/green panelmax),with 5mm thick toughened clear glass having well finished edges, have to provide two set of drawer and cabinet each in front table and side table with drawer(400mmx220mm) having locking arrangements and the remaining portion shall be of a cabinet with door minimum size 400mmx480mm)using 18mm thick MDF. SS telescopic drawer channel, SS fancy handle(Ebco/ Hafele/Hettich),Auto close hinge,Multi purpose lock(Ebco/ Hafele/Hettich), use 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted, and provide a foot rest in front side only using Powder coated MS rectangular section of 100mm*50mm*4mm covered with same color laminated MDF and CPU stand with movable suitable casters, Key board tray etc . Grommets shall be provided wherever required as directed. The rate shall be included cost of providing drawers, cabinet, Foot rest, key board tray, separate movable CPU holder, as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/03) |
| 2 | Providing and fixing modular L shaped work station of size 1400mmx1400mm in length, and width of 600mm( front side 500mm+100mm projection ) and 450 mm other side, 750mm height up to writing platform( including bush of 25mm thick) using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587(Preferable brands Action tesa/green panelmax),with 5mm thick toughened clear glass having well finished edges, have to provide one set of drawer and cabinet in side table with drawer(400mmx220mm) having locking arrangements and the remaining portion shall be of a cabinet with door minimum size 400mmx480mm)using 18mm thick MDF. SS telescopic drawer channel, SS fancy handle(Ebco/ Hafele/Hettich),Auto close hinge,Multi purpose lock(Ebco/ Hafele/Hettich), use 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted, and provide a foot rest in front side only using Powder coated MS rectangular section of 100mm*50mm*4mm covered with same color laminated MDF and CPU stand with movable suitable casters, Key board tray etc . Grommets shall be provided wherever required as directed. The rate shall be included cost of providing drawers, cabinet, Foot rest, key board tray, separate movable CPU holder, as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/02) |
| 3 | Providing and fixing modular work station of size 1000mm in length, and width of 600mm ( front side 500mm+100mm projection ) ,750mm height up to writing platform( including bush of 25mm thick) using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587 (Preferable brands Action tesa/green panelmax),with 5mm thick toughened clear glass having well finished edges. Use 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted, and provide a foot rest in front side only using Powder coated MS rectangular section of 100mm*50mm*4mm covered with same color laminated MDF and MDF block for CPU, Key board tray etc . Grommets shall be provided wherever required as directed. The rate shall be included cost of providing Foot rest, key board tray, CPU block, as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/01) |
| 4 | Providing and fixing modular work station of size 1000mm in length, and width of 600mm ( front side 500mm+100mm projection ) ,750mm height up to writing platform( including bush of 25mm thick) using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587(Preferable brands Action tesa/green panelmax),with 5mm thick toughened clear glass having well finished edges, have to provide one drawer(1 no-400mm x220mm) and the remaining portion shall be of a cabinet with door mimum size 400mmx480mm using 18mm thick MDFhaving individual locking arrangements . SS telescopic drawer channel, SS fancy handle(Ebco/ Hafele/Hettich), Auto close hinge, Multi purpose lock(Ebco/ Hafele/Hettich), use 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted, and provide a foot rest in front side only using Powder coated MS rectangular section of 100mm*50mm*4mm covered with same color laminated MDF . The rate shall be included cost of providing drawers, cabinet, Foot rest as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/11) |
| 5 | Providing and fixing modular work station of size 1100mm in length, and width of 500mm,750mm height up to writing platform( including bush of 25mm thick) using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587 (Preferable brands Action tesa/green panelmax),with 5mm thick toughened clear glass having well finished edges, have to provide one drawer(1 no-400mm x220mm) and the remaining portion shall be of a cabinet with door mimum size 400mmx480mm)using 18mm thick MDF having individual locking arrangements . SS telescopic drawer channel, SS fancy handle(Ebco/ Hafele/Hettich), Auto close hinge, Multi purpose lock (Ebco/ Hafele/Hettich), use 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted, and provide a foot rest in front side only using Powder coated MS rectangular section of 100mm*50mm*4mm covered with same color laminated MDF and MDF block for CPU, Key board tray etc . Grommets shall be provided wherever required as directed. The rate shall be included cost of providing drawers, cabinet, Foot rest, key board tray, CPU block as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/05) |
| 6 | Providing and fixing modular work station of size 600mm in length, and width of 400mm ,750mm height up to writing platform( including castor (4 Nos)) using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587(Preferable brands Action tesa/green panelmax) ,with 5mm thick toughened clear glass having well finished edges & one rack and shall be provided with 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted as per drawing and specification and also include all fittings and all conveyance charge etc. (Refer dwg No: KSEB/MVB/KND/06) |
| 7 | Providing and fixing table of size 600mm in length, and width of 600mm ,750mm height up to top of table ( including bush of 25mm thick) using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587(Preferable brands Action tesa/green panelmax),have to provide two equal shelves and door mimum size 273mmx705mm (2 Nos)) using 18mm thick MDF. SS fancy handle(Ebco/ Hafele/Hettich),Auto close hinge, use 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted. The rate shall be included cost of providing shelves, etc. as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/07) |
| 8 | Providing and placing modular C shaped Executive work stations with decorative front view as per approved drawings of size 1500mmx2400mmx1500mm in length, and width of 750mm( front side 650mm+100mm projection ) and 600 mm other side ,750mm height up to writing platform( including bush of 25mm thick) using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587(Preferable brands Action tesa/green panelmax),with 7mm thick toughened clear glass having well finished edges. Provide one side table with one set of drawers with minimum size for drawer(400mmx220mm) with locking arrangements and the remaining portion shall be of a cabinet with door mimum size 400mmx480mm) and closed shelves as per approved drawing . The other side table with one set of drawers with minimum size for drawer(400mmx220mm) with locking arrangements and the remaining portion shall be of a cabinet with door mimum size 400mmx480mm) and three equal set of drawer as per approved drawing using 18mm thick MDF. SS telescopic drawer channel, SS fancy handle(Ebco/ Hafele/Hettich),Auto close hinge,Multi purpose lock(Ebco/ Hafele/Hettich), use 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted, and provide a foot rest of full length in front side only using Powder coated MS rectangular section of 100mm*50mm*4mm covered with same color laminated MDF and MDF block for CPU with SS telescopic drawer channel, Key board tray etc .Grommets shall be provided wherever required as directed. The rate shall be included cost of providing drawers, cabinet, Foot rest, key board tray, CPU block, etc. as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/08) |
| 9 | Providing and fixing an L shaped (corner curved) counter tables for front office reception (Ground floor) size 2000 mmX 1500 mm & 600mm width with decorative front view, 750mm height up to writing platform (including bush of 25mm thick) and providing emblem (printed over transperent 6mm acrilic sheet or approved material ) as per approved design and drawings using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick and with a counter top for 750 mm length main table and width 300mm on top & 450mm height using good quality MDF board of Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade-I of 25 mm thick confirming to IS:14587 (Preferable brands Action tesa/green panelmax), with 5mm thick toughened clear glass having well finished edges. Provide side table with one drawers (1 no-400mmx220mm) with locking arrangements and the remaining portion shall be of a cabinet with door minimum 1 no size 400mmx480mm) , using 18mm thick MDF, and with SS telescopic drawer channel, SS fancy handle,Auto close hinge, Multi purpose lock etc of make (Ebco/ Hafele/Hettich) and remaining portion full length open shelf . Use 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted, and provide a foot rest in front side only using Powder coated MS rectangular section of 100mm*50mm*4mm covered with same color laminated MDF and MDF block for CPU with SS telescopic drawer channel, Key board tray etc . Grommets shall be provided wherever required as directed. The rate shall be included cost of providing drawers, cabinet, Foot rest, key board tray, CPU block, counter top as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/04) |
| 10 | Providing and fixing an L shaped (corner curved) counter tables for front office reception (in 1st floor) size 2500 mmX 1500 mm & 600mm width with decorative front view, 750mm height up to writing platform (including bush of 25mm thick) and providing emblem (printed over transperent 6mm acrilic sheet or approved material ) as per approved design and drawings using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick and with a counter top for 1500 mm length on short side and 1400 mm on main table and width 300mm on top & 450mm height using good quality MDF board of Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade-I of 25 mm thick confirming to IS:14587 (Preferable brands Action tesa/green panelmax), with 5mm thick toughened clear glass having well finished edges. Provide main table with one drawers (1 no-400mmx220mm) with locking arrangements and the remaining portion shall be of a cabinet with door minimum 1 no size 400mmx480mm) , using 18mm thick MDF, and with SS telescopic drawer channel, SS fancy handle,Auto close hinge, Multi purpose lock etc of make (Ebco/ Hafele/Hettich) . Side Table also provided with one drawer and one cabinet of same size and remaining portion full length open shelf . Use 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted, and provide a foot rest in front side only using Powder coated MS rectangular section of 100mm*50mm*4mm covered with same color laminated MDF and MDF block for CPU with SS telescopic drawer channel, Key board tray etc . Grommets shall be provided wherever required as directed. The rate shall be included cost of providing drawers, cabinet, Foot rest, key board tray, CPU block, counter top as per drawing and specification and also include all fittings and all conveyance charge etc. (Refer dwg No: KSEB/MVB/KND/09). |
| 11 | Providing and fixing shelves of size(800mmx400mm (excluding door) x1200mm) (including bush of 25mm thick), using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587 (preferable brands-Action tesa/Green panelmax),with 5 cubicals as per drawing. total height 1200mm with 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted. The rate including cost of SS auto close (soft type) hinges, SS fancy handle etc.(Preferable brands Ebco/Hafele/Hettich) as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/S1). |
| 12 | Providing and fixing shelves of size(1200mmx400mm (excluding door) x1200mm) (including bush of 25mm thick), using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587 (preferable brands-Action tesa/Green panelmax),with 9 cubicals as per drawing . total height 1200mm. with 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted. The rate including cost of SS auto close (soft type) hinges, SS fancy handle etc.(Preferable brands Ebco/Hafele/Hettich) as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/S2). |
| 13 | Providing and fixing shelves of size(1400mmx400mm (excluding door) x1200mm) (including bush of 25mm thick), using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587 (preferable brands-Action tesa/Green panelmax),with 9 cubicals of equal size . total height 1200mm. with 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted. The rate including cost of SS auto close (soft type) hinges, SS fancy handle etc.(Preferable brands Ebco/Hafele/Hettich) as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/S3). |
| 14 | Providing and fixing shelves of size(1250mmx600mm (excluding door) x2115mm) (including bush of 25mm thick), using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587 (preferable brands-Action tesa/Green panelmax),with 9 cubicals of equal size . total height 1200mm. with 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted. . The rate including cost of SS auto close (soft type) hinges, SS fancy handle etc.(Preferable brands Ebco/Hafele/Hettich) as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/S4) |
| 15 | Providing Bench with cushion, 600mm width, 500mm height (including bush of 25mm thick) and bottom cabinet having door width 600mm, using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587 (preferable brands-Action tesa/Green panelmax)with stainless steel hardware fittings, locks and screws of 304 grade SS of make Ebco/Hettich/Hafele or approved equivalent. All the edge shall have approved PVC edge banding (2 mm thick for doors , 0.50 mm for remaining) and shall be machine pasted and cushion shall be with 50 density 35 mm PU form and high quality rexine / approved cloth including cost of all materials and labour. |
| 16 | Providing and placing a table 2400mmX750mm (Table top 600mm+150mm projection) on conference hall stage with decorative front view as per approved design and providing emblem (printed over transperent 6mm acrilic sheet) as per design and drawings using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of table top with 25mm and others 18 mm thick confirming to IS:14587(Preferable brands Action tesa/green panelmax),use 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted. Grommets shall be provided wherever required as directed. And It shall be provided with push-to-open tabletop power/charging ports, with HDMI, VGA, Audio, LAN, 6 A Power socket (3 nos) & USB Port (1 no). (Refer dwg No: KSEB/MVB/KND/10). |
| 17 | Providing and fixing shelves of size(800mmx450mm (excluding door) x800mm) (including bush of 25mm thick), using good quality MDF board of Pr-laminated with decorative lamination on both sides exterior grade-1 of 18 mm thick confirming to IS:14587 (preferable brands-Action tesa/Green panelmax),with 4 cubicals of equal size . with 2mm thick PVC edge band on visible edge and 0 .5mm on interior surface and shall be machine pasted. The rate including cost of SS auto close (soft type) hinges,SS multi purpose locks, SS fancy handle etc.(Preferable brands Ebco/Hafele/Hettich) as per drawing and specification and also include all fittings and all conveyance charge etc.(Refer dwg No: KSEB/MVB/KND/S5). |
| 18 | Providing manufacturing and fixing in the conference hall a Platform of size 4800mm x 2400mm and 450 mm height made with 18mm marine ply wood conforming to IS 710:2010 grade(Kitply/Greenply/Century/wuudply or equivalent) and providing step on both sides size 1000mmx300mmx150mm and laying good quality approved color carpet over it. The platform shall be supported on a welded MS angle framework as per approved drawing using 40×40×5 mm MS angles for the main frame, 35×35×5 mm MS angles for internal bracing both ways, and vertical support posts made of 40×40×5 mm MS square hollow sections, each post shall rest on 100×100×6 mm MS base plates. The steel structure shall be welded, primer coated, and finished with two coats of synthetic enamel paint.(Refer dwg No: KSEB/MVB/KND/12). Please Enable Macros to View BoQ information |
