|
| 1 | Item Description |
| 2 | Providing G.l. pipes 80 mm dia |
| 3 | Providing G.l. pipes 50 mm dia |
| 4 | Providing G.l. pipes 25 mm dia |
| 5 | Providing G.l. pipes 20 mm dia |
| 6 | Providing G.l. Union 50 mm nominal bore |
| 7 | Providing G.l. Union 25 mm nominal bore |
| 8 | Providing G.l. pipes 15 mm dia |
| 9 | Providing G.l. tees (equal) 25 mm |
| 10 | Providing Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm nominal dia |
| 11 | Providing Chlorinated Polwinyl - chloride (CPVC) pipe 40 mm nominal dia |
| 12 | Providing Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia |
| 13 | Providing Chlorinated Polyvinyl- chloride (CPVC) pipe 20 mm nominal dia |
| 14 | Providing Chlorinated Polyvinyl - chloride (cPVC ipe 15 mm nominal dia |
| 15 | Providing Brass stop-cock 15 mm dia |
| 16 | Providing 15 mm PTMT bib cock |
| 17 | Providing PTMT pillar cock |
| 18 | Providing C.P. brass waste 40 mm |
| 19 | Providing C.P. brass waste 32 mm |
| 20 | Providing Vitreous china flat back wash basin 630x450 mm |
| 21 | Providing Vitreous china 10 litres low levelcistern with fittings |
| 22 | Providing and Fixing Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 200 mm |
| 23 | Providing and Fixing Brass full way valve with C.l. wheel (screwed end) 80 mm dia |
| 24 | Providing and Fixing Brass full way valve with C.l. wheel (screwed end) 50 mm dia |
| 25 | Providing and Fixing Brass full way valve with C.l. wheel (screwed end) 25 mm dia |
| 26 | Providing and Fixing 20 mm dia Gunmetalgate valve with wheel |
| 27 | Supply of Bleaching Power |
| 28 | H.P. or L.P. ballvalve with polythene floats:20 mm dia |
| 29 | H.P. or L.P. ballvalve with polythene floats:25 mm dia |
| 30 | R.C.C. pipes NP2 class 150 mm dia |
| 31 | G.l. timpet washer |
| 32 | Bitumen washer |
| 33 | Satna lime |
| 34 | Acid for cleaning tiles |
| 35 | Polyethylene water storage tank with cover and suitable locking arrangement |
| 36 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 37 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement:3 coarse sand (zone-lll) derived from natural sources:6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 38 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement :2 coarse sand (zone-lll) derived from natural sources :4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 39 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cuttinB, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 40 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per lsr 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be rupplied in single length upto 12 metre or as desired by Engineer- in-cha.ge. The sheet shall be fixed using self drilling /self tappint screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontau vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 41 | Providing and fixing lsl marked flush door shutters conforming to IS: 2202 (Part l) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including lSl marked Srainless Steel butt hinges with necessary SCrews |
| 42 | 12 mm cement plaster of mix: 1:6 (1 cement: 6 fine sand) |
| 43 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement:4 fine sand) |
| 44 | Brick work with Fly Ash Brick (230X11X75 mm size) bricks of class designation 10 infoundation and plinth in: Cement mortar 1:6 (l cement: 6 coarse sand) |
| 45 | Brick work with Fly Ash Brick (230X115X75mm size) bricks of class designation 10 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 46 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) |
| 47 | Finishing walls with Acrylic Smooth exterior paint of required shade :OId work (One or more coat applied @ 0.90 lv/10 sqm) |
| 48 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 49 | Carriage of garbage or earth mixed other wastes by tractor trolley including manual loading and unloading and disposing at garbage dumps or at any other specified location as per the direction of Engineer-In-Charge.(i) For lead of 1 km |
| 50 | Cleaning of over head water tank (HDPE / Masonary) by applying bleaching powder, washing the tank neatly as per instruction of EIC. (upto 2000 Litre capacity) |
| 51 | Removal of chokage / blockage of inspection chambers by removing silt, sludge and other foreign materials and disposal of the same to the nearest dustbins etc. Complete as per the direction of engineer-In-Charge. |
| 52 | Day to day maintenance of water supply net work and plumbing work etc. with all labour cost but excluding cost of materials as per instruction of Engineer Incharge. |
| 53 | Labour charges for day to day maintenance works related with welding works like welding of hinges, welding of flats in window grills and other petty jobs related with welding works as and when required by deploying welder beldar/coolie in residential quarters of colony. (welding rod and electricity is to be provided by the department ) as per instruction of Engineer-in-charge. (1 Skilled and 1 unskilled worker per day) |
| 54 | Cleaning of septic tank with removal of sludge night soil etc complete and putting the waste materials by digging pit within a distance of 1km and coverring the same as per the instruction of Engg-in-charge |
| 55 | Cleaning of Raw water tank of filter plant/pump house including rubbing & cleaning walls & base and disinfecting with bleaching powder etc. and disposal of waste material to a lead of 50 m all complete as per instruction of EIC |
| 56 | Supply of Welding rod for day to day work with as per Instruction of the EIC etc completed. |
| 57 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information |
