|
| 1 | Item Description |
| 2 | Wet Mix Macadam / Interlocking layer laying A Wet Mix Macadam / Interlocking layer laying Using Mechanical Paver (Providing, laying,spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)as per clause 406. Note for Item No. 4.14 A use only on prior permission of CE, NH Zone, PWD, Raipur. |
| 3 | Prime coat (Providing and applying primer coat with oil based bitumen emulsion (SS-1, grade confirming to IS:8887) on prepared surface of granular Base including clearing of road surface and spraying primer using mechanical means as per clause 502 & 112. with bitumen emulsion (SS-1, grade confirming to IS:8887) @0.85 kg/sqm |
| 4 | Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503.on Bituminous surfaces @ 0.25 kg per sqm |
| 5 | Bituminous Macadam (Providing and layingbituminous macadam with 120- 200 TPH highercapacity Batch Type Hot Mix Plant using crushedaggregates of specified grading premixed withbituminous binder VG-40, transported to site, laidover a previously prepared surface with paverfinisher to the required grade, level and alignmentand rolled as per clauses 501.6 and 501.7 to achieve the desired compaction) as per clause 504 & 112. With sensor paver finisher(ii) for Grading-II (19 mm nominal maximum size,bitumen content minimum 3.40%) |
| 6 | Close Graded Premix Surfacing/Mixed SealSurfacing (Mechanical means using HMP of 120 -200 TPH capacity . Providing, laying and rolling ofclose-graded premix surfacing material of 20 mmthickness using viscocity grade bitumen VG-40 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller and finishing to required level and grade. ) as per clause 508 & 112.With sensor paver finisherType A (11.2 mm to 0.09 mm size aggregates) |
| 7 | Granular Shoulders (Construction of granular shoulder at top 150mm of earthen shoulder shall be well graded mix of at least 30% of granular sub-base material of grading-III as per clause 401 and moorum/gravel or soil and combination having soaked CBR value of not less than 30%. The granular layer shall be compacted to at least 98% of mix dry density of material as determined as per IS:2720 (Part-B)) |
| 8 | Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of retro reflective type sheeting and vide clause 801.3, 2mm thick aluminium sheeting, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 40 x 40 x 5mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and painting all components of the signs and supports as per clause 7.2 of IRC:67 )Made of Class-C Micro Prismatic Grade Sheeting of Type-XI (for National Highways and State Highways)(ii) 90 cm equilateral triangle |
| 9 | (vi) 90 cm circular |
| 10 | (xv) 90 cm high octagon |
| 11 | Direction and Place Identification signs with size more than 0.9 sqm size board.(Providing and erecting direction and place identification retro reflectorised sign asper IRC :67 made of retro reflective type sheeting and vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3mm Angle mounted on a mild steel circular pipe 65 NB firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, A Made of Class-C Micro Prismatic Grade Sheeting of Type-XI (for National Highways and State Highways) |
| 12 | Providing and fixing Solar Blinker Light 300 mm dia, LED Aspect made of FRP/Poly carbonate with battery backup fitted on 150 mm dia MS pipe - 3.0 metre long from the ground level, firmly fixed to the ground by mean of properly designed foundation with M-15 grade cement concrete 60cm x 60cm x 60cm, below ground level. |
| 13 | Providing & Fixing Hazard Marker Type-2 Partial Retro Reflective Size 0.30 x 0.90M made of 16 gauge (1.6 mm) thick mild steel sheet Confirming to IS:2062 Painted with one cast of Zinc Chromate Stoving Primer and two coats of Black Stove Enamel (Oven Baked) paint with 10 cm bands of yellow Retro- Reflective Sheeting of Engineering Grade pasted a per IRC:79 including one MS angle Iron post of size 50x50x5 mm of 1.65 meter long duly painted with synthetic enameled paint block including bolts and fixing the same in M-15 concrete black of size 30x30x30cm, including transportation etc. Complete. |
| 14 | Providing and Fixing Linear Delineator System as per MOST clause 806 of specification for Roads and Bridges, of size 33’'x 4” made with corrugate Aluminum (Confirming to IS:736 -Material Designation, 24345; or 1900) and reflective sheeting of Micro prismatic Lens sheeting as stipulated in MOST circular (RW/NH-33023/31/88-DO.iii) confirming to ASTM D4956-01 Type IX and fixing the same with bracket made of galvanized steel fixed with 6 Nos. high precision Screws confirming toIS:1364. |
| 15 | Rumble Strips (Provision of numbers of rumble strips covered with premix bituminous carpet, 15-20 mm high at center, 250 mm wide placed at 1 m center to center at approved locations to control speed, marked with white strips of road marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface) |
| 16 | Sub total |
| 17 | Add GST@18% Please Enable Macros to View BoQ information |
