|
| 1 | M/L for repair of fully upholstered sofa including change of fabric, rubber cushion 100mm thick for seat & back having 75mm thick rubber cushion with ISI mark including 20mm thick 'U' foam of 32 density, newar, spring and canvas lining of approved quality with necessary hardware & spirit polishing of wooden surfaces etc all complete and all as per direction of Engineer-in-charge. |
| 2 | Sofa Single Seater |
| 3 | Sofa Two Seater |
| 4 | Sofa Three Seater |
| 5 | M/L for repair of Sofa Easy Chair including change of Fabric, rubber cushion, foam etc. of approved colour, shade & quality including necessary hardware & spirit polishing on wooden surfaces etc. all complete and all as per direction of Engineer-in-charge. |
| 6 | M/L for repair of wooden settee with back including changing of fabric, 50mm thick rubber cushion foam etc of approved quality including necessary hardware & spirit polishing of wooden surfaces etc. all complete and all as per direction of Engineer-in-charge. |
| 7 | Settee Two Seater |
| 8 | Settee Three Seater |
| 9 | M/L for repair of wooden settee without back including changing of fabric, 50mm thick rubber cushion foam etc of approved quality including necessary hardware & spirit polishing of wooden surfaces etc. all complete and all as per direction of Engineer-in-charge. |
| 10 | Single Seater |
| 11 | Settee Two Seater |
| 12 | Settee Three Seater |
| 13 | M/L for repair of High back Revolving Chair upholstered with seat & back including change of Fabric, rubber cushion, foam etc. of approved colour, shade & quality with necessary hardware & painting with enamel paint etc. all complete and all as per direction of Engineer-in-charge. |
| 14 | M/L for repair of Medium back Conference Revolving Chair upholstered with seat & back including change of Fabric, rubber cushion, foam etc. of approved colour, shade & quality with necessary hardware & painting with enamel paint etc. all complete and all as per direction of Engineer-in-charge. |
| 15 | M/L for repair of Low back Revolving Chair upholstered with seat & back including change of Fabric, rubber cushion, foam etc. of approved colour, shade & quality with necessary hardware & painting with enamel paint etc.all complete and all as per direction of Engineer-in-charge. |
| 16 | M/L for repair of Computer Revolving Chair upholstered with seat & back including change of Fabric, rubber cushion, foam etc. of approved colour, shade & painting with enamel paint etc.all complete and all as per direction of Engineer-in-charge. |
| 17 | M/L for repair of wooden Cushioned Chair (Visitor/Study/Dinning) including change of Fabric, rubber cushion, foam etc. of approved colour, shade & quality including necessary hardware & spirit polishing on wooden surfaces etc.all complete and all as per direction of Engineer-in-charge. |
| 18 | M/L for P/F of PU Arm of revolving chair with necessary hardware etc. all complete and all as per direction of Engineer-in-charge. |
| 19 | M/L for repair of any type of chair with welding work such as welding of broken pedestal, base, central lever, legs, arms, and painting to match the existing finish etc.all complete and all as per direction of Engineer-in-charge. |
| 20 | M/L for taking out damaged wheels of revolving chairs and providing & fixing new wheels of approved quality & size i/c necessary hardware etc.all complete and all as per direction of Engineer-in-charge. |
| 21 | Replacement of chair base made of nylon PVC base 600 mm size having 5 nos. of branches of best quality including labour and material etc all complete and all as per direction of Engineer-in-charge. |
| 22 | Material and labour for taking out of old damaged shokers of reolving chairs including replacing the new shokers of approved quality and size including necessary hardware etc all complete and all as per direction of Engineer-in-charge. |
| 23 | Material and labour for taking out of old damaged Seat Plate of reolving chairs including replacing the new Seat Plate of approved quality and size including necessary hardware etc all complete and all as per direction of Engineer-in-charge. |
| 24 | M/L for minor repairs of tables including change of sunmica top of approved colour & quality etc. all complete and all as per direction of Engineer-in-charge. |
| 25 | M/L for supply of 8mm thik plain glass sheet on table top, including cut of shape, edges rounded and polished grinding etc all complete and all as per direction of Engineer-in-charge. |
| 26 | M/L for S/F of 3 mm thick looking mirror in hat and cane stand etc. all complete and all as per direction of Engineer-in-charge. |
| 27 | M/L for taking down old/damaged blinds and S/F of double layer roller blinds zebra type of approved make & shade including aluminium holow circular pipe, roller mechenism, side endcaps, brackets, including all necessary fittings etc all complete and all as per direction of Engineer-in-charge. |
| 28 | M/L for taking down old/damaged blinds and P/F of new blinds 100mm wide of approved colour & shade including all fitting/fixture etc. all complete and all as per direction of Engineer-in-charge. |
| 29 | Supply of synthetic door mat of approved shade, colour & quality. |
| 30 | M/L for 2 or more coats of varnish over wood surface of approved brand (Copal/Spar) with malamine finish after scrapping sand papering and preparing the surface smooth including necessary repairs to scratches etc.all complete and all as per direction of Engineer-in-charge. |
| 31 | M/L for Providing & Fixing of 2mm thick Frosted / Sun control Film of approved shade and quality etc all complete and all as per direction of Engineer-in-charge. |
| 32 | M/L for Providing & Fixing of Curtain made out of fabric of supreir quality, colour and shade and all as per sample approved etc all complete and all as per direction of Engineer-in-charge. |
| 33 | M/L for replacement of old damaged carpet and providing & laying of loop pile carpet of approved make & quality of prepared surface with approved synthetic adhesive etc.all complete and all as per direction of Engineer-in-charge. Credit for old retrieved materials shall be considered which shall become contractor's property. |
| 34 | Minor repairing & M/L for dry cleaning of following by vaccum cleaner using approved chemical/ditergent etc. all complete and all as per direction of Engineer-in-charge. |
| 35 | Sofa Single Seater |
| 36 | Sofa Two Seater |
| 37 | Sofa Three Seater. |
| 38 | Offce/Confrence/Auditorium Chairs. |
| 39 | Carpet of any type. |
| 40 | M/L for dry cleaning of following Misc items etc. all complete as per direction of Engineer-in-charge. |
| 41 | Towel big size of any type. |
| 42 | Towel small size of any type. |
| 43 | Napthin cloth / wping sheet of any type and size. |
| 44 | Table cloth of size 2.5m x 2m of any type. |
| 45 | M/L for taking out old/damaged lock of steel Almirah and P/F new lock of approved make for steel almirah etc. all complete and all as per direction of Engineer-in-charge. |
| 46 | M/L for making of New Key (Pair) of approved quality for locks of steel Almirah etcall complete and all as per direction of Engineer-in-charge. |
| 47 | M/L for taking out old/unserviceable handle of steel almirah and P/F new handle of approved quality and make etc all complete and all as per direction of Engineer-in-charge. |
| 48 | M/L for taking out old / damaged lock of Drawer of Wooden Table and P/F new lock with keys of approved quality and make etc all complete and all as per direction of Engineer-in-charge. |
| 49 | M/L for taking out old / damaged Channel of Wooden Table and P/F Nnew Chennal (Telescopic) of approved quality and make with necessary hardware etc all complete and all as per direction of Engineer-in-charge. |
| 50 | M/L for replacement of Brass Handle of drawers of tables of any size with necessary hardwares etc. all complete and all as per direction of Engineer-in-charge. |
| 51 | M/L for painting with enamel paints to steel Almirah (Large) etc all complete and all as per direction of Engineer-in-charge. |
| 52 | M/L for painting with enamel paints to steel Almirah (Small) etc all complete and all as per direction of Engineer-in-charge. |
| 53 | M/L for taking out old damaged leg of steel almirah and P/F new legs of approved size and quality etc. all complete and all as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
