|
| 1 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 2 | Sal wood |
| 3 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : |
| 4 | 2nd class teak wood |
| 5 | 50x12 mm |
| 6 | 50 x 20 mm |
| 7 | Providing & Fixing decorative high pressure laminated sheet of plain I wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 8 | 1.0 mm thick |
| 9 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). |
| 10 | 12 mm thick commercial ply conforming to IS : 1328 BWR type |
| 11 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 12 | Hot finished welded type tubes |
| 13 | Canning of Wooden chair seat/ back with plastic cane of required width half round shape, canning to be done in pattern of godrej chair/ diamond pattern as approved, including widening of holes, drills of holes in wood etc. if required fixing the cleats for proper fixing of seat, removing canning cleaning, repair and change with cleaned/ new steel screws of desired size etc. with all required T&P complete as per direction of Engineer. |
| 14 | Canning of M S pipe/tube chair seat/ back with plastic cane of required width half round shape, canning to be done in pattern of godrej chair/ diamond pattern as approved, including widening of holes, drills of holes in steel pipe etc. if required welding the cleats for proper fixing of seat, removing canning cleaning, repair and change with cleaned/ new steel screws of desired size etc. with all required T&P complete as per direction of Engineer. |
| 15 | Providing and fixing plain lining with necessary screws/ nuts & bolts/nails and fixed on wooden /steel frame work, complete as per direction of Engineer in charge (Frame work shall be paid for saparately). 6 mm thick commercial ply conforming to IS : 1328 BWR type |
| 16 | For Calculation purpose Only |
| 17 | Sub Total (A) Please Enable Macros to View BoQ information |
