|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, bushes, shrubs, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared or as directed by Engineer in-charge. The rate is inclusive of supply of all labour, tools & plants etc., complete. |
| 2 | Demolishing damaged CC Road in cement concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge including cost of all labour, tools & plants etc., complete. |
| 3 | Demolishing Laterite stone masonry in cement mortar, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge including cost all labour, tools & plants etc. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lifts including cost of levelling, all labours charges, minor tools & plants etc., complete as directed by the Engineer in charge. |
| 6 | Providing and laying in position cement concrete of grade 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering for all work up to plinth level including laying, compacting, curing with cost of all materials, labour, tools & plants etc. complete as directed by engineer in charge. |
| 7 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge. |
| 8 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 9 | Painting two or more coats on Exposed surfaces of Kerb Stone, Flag mast etc. with synthetic enamel paint of approved brand and manufacture (Asian/Berger/or equivalent) of required colour to give an even shade over an under coat of suitable shade with ordinary paint of approved brand and manufacture including cost of all materials, labour, tools & plants etc. complete as directed by Engineer in charge. |
| 10 | Construction of Coursed laterite stone masonry work in foundation and plinth with cement mortar 1:5 (1 cement : 5 coarse sand) with approved quality machine cut Laterite stone of appropriate size as required or as directed including cost of curing and supply of all materials, labour, tools & plants etc., complete as directed by the engineer in charge. |
| 11 | 15 mm cement plaster in single coat on the rough side of single or half brick wall including arises, internal rounded angles chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth with cement mortar of mix 1:4 (1 cement: 4 coarse sand) including cost of all materials, labour, tools and plants etc., complete as directed by engineer in charge. |
| 12 | Finishing walls with ready mixed Premium Acrylic emulsion paint (Asian/Berger/or equivalent Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with Silicone additives for New work (Two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) at all heights to give an even shade as directed by Engineer-in-Charge including cost of all materials, labour, tools & plants, scaffolding etc., complete. |
| 13 | Providing and fixing 18 mm thick Granite stone slab of colour black, Cherry/Ruby red, gang saw cut, mirror polished, premoulded and prepolished, machine cut for Kids play area seating, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels as per directions of Engineer-in-Charge including cost of all materials, labours, tools & plants etc. |
| 14 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. The rate is inclusive of cost of supply of all materials, labour, tools and Plant, transportation charges etc. complete as directed by Engineer-in-charge. |
| 15 | Brick edging with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres and cost of all materials, labour, tools & plants etc. complete as directed by Engineer in charge. |
| 16 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete as directed by Engineeer in charge (earth measured in stacks will be reduced by 20% for payment). |
| 17 | Supplying and stacking at site dump manure Screened through sieve of I.S. designation 4.75 mm from approved source, including carriage upto 5 km lead complete as directed Engineeer in charge (manure measured in stacks will be reduced by 8% for payment). |
| 18 | Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. |
| 19 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge and Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge. |
| 20 | Anti termite treatment of lawn area through Chloropyriphose 20% E.C., 5 liter diluted in 995 liters water and applying solution @ 1.00 litre solution per sqm each application in lawn / bed area (two application) i/c cost of chemical) and as per direction of officer-in-charge. |
| 21 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 22 | Providing and stacking Duranta Golden, having ht.12 cm to 15 cm bushy shape with fresh and healthy leaves in Poly Bag and as per direction of the officer-in-charge. |
| 23 | Providing and stacking of Malpighia coccigera of height 30-45 cm., multibranched in earthen pot of size 20 cm as per direction of the officer-in-charge. |
| 24 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid separately). |
| 25 | Plantation of Trees, Shrubs, Hedge, ground covers and seasonal plants at site i/c watering and removal of unsaverieable material’s as per direction of officer in charge (excluding cost of plant & water). |
| 26 | Providing and fixing factory machine-cut, smooth honed finish Sadarahalli grey granite stone bench of minimum size 1500 mm length, 450 mm width, and 450 mm seat height; comprising seat slab of minimum 50 mm thickness and backrest formed of 3 horizontal granite slats of minimum 40 mm thickness each, securely fixed into granite side supports of minimum 75 mm thickness; all visible surfaces machine-cut and honed smooth; edges chamfered 5 mm; bench placed over compacted earth base or fixed over M15 grade cement concrete bed of 75 mm thick as directed; including loading, unloading and transportation of materials etc., all complete as per direction of Engineer-in-Charge. |
| 27 | Providing and placing set of 3 natural granite mushroom decorative sculptures of varying sizes (approx. 250 mm to 500 mm height), made of uniform grey granite stone, machine-chiselled rough-hewn finish, including arranging in group formation and fixing in position over cement mortar bed 1:4 or embedded in ground as per design, including loading, unloading and transportation of materials etc., all complete as per direction of Engineer-in-Charge. |
| 28 | Providing and fixing solid natural granite abstract sculpture of minimum 900 mm (3 feet) height, carved in approved design from uniform grey granite stone, all exposed surfaces honed smooth, including providing and fixing over cement concrete pedestal, anchoring with stainless steel dowels, and finishing including loading, unloading and transportation of materials etc complete as per direction of Engineer-in-Charge. |
| 29 | Supply and fixing new Jet black Granite Plaque stone of size 0.60X1.50 meter of approved quality engarved with letters of different size in Marathi, Hindi and English language and national emblem carved on top, after dismantling existing old Granite plaque stone from fixed position without damaging masonry work and other attched granite stone work and disposal of waste materials within 50 meters lead as per direction of Engineer-in-Charge. Border has to be carved on the granite stone and all the letters, national emblem and border should be filled with golden colour etc. and fixing the granite stone in thick cement slurry and making the back side of stone rough for gripping and finishing the side surface of wall, after levelling the surface including cost of all material, labour, tools and plants etc. complete as directed. |
| 30 | Providing, fabricating, supplying, and installing a Four-Seater See-Saw made using 75 mm horizontal galvanised iron pipes fitted with four (4) heavy-duty LLDPE roto-moulded seats, all components being UV-stabilised and child-safe. The GI structural members shall be coated with marine-grade protective coatings to withstand coastal weather conditions and prevent corrosion. The cost shall be inclusive of all civil installation works, including grouting in cement concrete (1:2:4), complete transportation, loading and unloading, and all materials, labour, fixtures, and accessories required for proper installation as per manufacturer’s specifications and as directed by the Engineer-in-Charge. |
| 31 | Providing, fabricating, supplying, and installing a Circular Swing consisting of galvanized iron structural members fitted with LLDPE roto-moulded four seats and four heavy-duty bearings to ensure smooth, stable movement; all GI structural members shall be painted with marine-grade anticorrosive coatings suitable for coastal weather conditions, while LLDPE seats shall be UV-stabilised and weather-resistant. The item includes all fabrication works, complete structural assembly, and provision of all necessary fasteners, fixtures, and accessories required for safe installation. The cost is inclusive of civil installation works such as grouting with cement concrete (1:2:4), transportation charges including loading and unloading, and all labour, tools, and equipment required to complete the work as directed by the Engineer-in-Charge. |
| 32 | Providing, fabricating, supplying, and installing a customised Merry-Go-Round (MGR) designed with child-safety considerations, equipped with two brand-new SKF bearings for smooth and stable rotation, and fitted with heavy-duty LLDPE roto-moulded seats of animal/vehicle-shaped tops as per approved design. All galvanised iron structural members shall be painted with marine-grade protective coatings suitable for coastal weather conditions. The rate shall include complete fabrication, supply of all structural members, seats, bearings, fixtures, fasteners, and accessories, along with all civil installation works such as excavation, foundation preparation, grouting with cement concrete (1:2:4), finishing and curing, as well as all transportation, loading, unloading, and handling charges, all complete as directed by the Engineer-in-Charge. |
| 33 | Providing, supplying, and installing LLDPE roto-moulded garbage dustbin of approximate size 52(L) × 66(W) × 87(H) cm with a capacity of 60–80 litres, in the shape of a fish or any other approved animal design, complete with hinged lid or open-mouth arrangement for waste deposition, mounted on a suitable roto-moulded or approved base/pedestal for stability, including all accessories, fixtures, fasteners, and necessary hardware; the cost being inclusive of loading, unloading, transportation, handling, placing in position, and carrying out minor civil works wherever required for proper installation, all complete as per approved design, colour scheme, and as directed by the Engineer-in-Charge. |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 50 mm nominal dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge including cost of supply of all materials, labours, tools & plants etc. complete for External work. |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm nominal dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge including cost of supply of all materials, labours, tools & plants etc. complete for External work. |
| 36 | Providing, fixing, and commissioning of pop-up sprinkler made of durable ABS engineering plastic body with corrosion-resistant nozzle, having 360° adjustable sprayer head type, water-saving design, suitable for uniform watering of garden and lawn areas (nominal coverage diameter ≈3 m), including supply of all labour, materials, tools, and plants, complete in all respects as directed by the Engineer-in-Charge. |
| 37 | Providing and fixing 50 mm dia CPVC Ball Valve of approved quality and make including supply of all labour, materials, tools and plants etc. complete. |
| 38 | Providing and fixing plastic drip irrigation tubing for Hedge Plantation at Devgad lighthouse station, manufactured from UV-stabilized flexible LDPE/HDPE material conforming to relevant IS standards, including main lateral tubing of 16 mm outer diameter, wall thickness 1.2 mm, pressure rating 2.5–4.0 kg/cm², with 4 mm micro-tubes, fitted with pressure-compensating emitters/drippers of 2–4 LPH discharge as required, and complete with necessary accessories such as connectors, take-offs, grommets, stakes, adaptors and flush valves, with proper laying, jointing, fixing, testing and commissioning of the system, including all labour, materials, tools, transportation, loading and unloading, complete as directed by the Engineer-in-Charge. |
| 39 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required for gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. The cost is inclusive of all materials, labours, tools & plants and all other charges etc., complete. |
| 40 | Painting with Epoxy paint (two or more coats) on steel works at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 41 | Providing and fixing plain multipurpose 12 mm thick Cement fiber board (Hight pressure steam cured) as per IS: 14862 with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). |
| 42 | Providing and fixing high quality waterproof Asphalt–Fiberglass Roofing Shingles at all levels on pitched roof surfaces as per approved drawings, design and manufacturer’s specifications, including supply of fiberglass-reinforced asphalt shingles with ceramic mineral-granule surfacing, compatible waterproof underlayment/membrane, starter shingles, ridge/hip shingles, galvanized corrosion-resistant roofing nails, and all required flashings at valleys, ridges, hips, eaves, wall junctions and pipe/duct penetrations. Work shall include surface preparation, staggered-pattern laying with specified head-lap and side-lap, fixing with specified nailing pattern, sealing, cutting, trimming, waste handling, scaffolding, tools and plant, labour, transport, loading-unloading, and all incidental works necessary for complete waterproof installation, all as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
