|
| 1 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. (Wires of Havells/KEI/ Plaza/Polycab and accessories of Anchor make) Group C. |
| 2 | Re-wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed Steel / PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable including dismantling of the existing wiring as required. (excluding switch & sheet etc.) (Wires of Havells/KEI/ Plaza/Polycab and accessories of Anchor make) Group C. |
| 3 | Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. (Wires of Havells/KEI/ Plaza/Polycab make) |
| 4 | 3x1.5 Sq. mm. |
| 5 | 5x1.5 Sq. mm. |
| 6 | 3x2.5 Sq. mm. |
| 7 | 5x2.5 Sq. mm. |
| 8 | 3x4.0 Sq. mm. |
| 9 | 5x4.0 Sq. mm. |
| 10 | 3x6 Sq. mm. |
| 11 | 5x6.0 Sq. mm. |
| 12 | 3x10 Sq. mm. |
| 13 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- (Diplast/ Anchor make) 25 mm. dia |
| 14 | Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:- (ISI marked) |
| 15 | 4 modules(140mmx78mmx50mm) |
| 16 | 6 modules(205mmx78mmx50mm) |
| 17 | 12 modules (205mmx135mmx60mm) |
| 18 | Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. (Anchor make) S.P. 5/ 6 Amps one way Modular switch. |
| 19 | Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required. (Anchor make) |
| 20 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. (Anchor make) |
| 21 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. (Anchor make) |
| 22 | Supplying and fixing ceiling rose on the existing junction box / wooden block including connections etc. as required. (Anchor make) |
| 23 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- (Havells/Lauritz Knudsen make) Single pole. Cat-A. |
| 24 | Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- (Havells/Lauritz Knudsen make) Double pole. Cat-A. |
| 25 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- (Havells/Lauritz Knudsen make) |
| 26 | Double door-12 way |
| 27 | Double door-16 way |
| 28 | Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- (Havells/crompton/orient make) Ceiling Fan 1400 mm sweep, Category-A |
| 29 | Providing, Installation, testing and commissioning of wall fan including earthing etc. as required:- Wall Fan 400 mm sweep High Speed, (Havells/crompton/orient make) |
| 30 | Providing and fixing decorative ultra slim polycarbonateLED batten tube lighting fixture with high lumen output, energy efficient ready to use pack complete with all accessories, connections, testing and commissioning etc. as required. (Havells make) 40 watt-LED (Havells/crompton/orient/Clear make) |
| 31 | Providing and fixing Decorative ultra slim polycarbonate rechargable LED batten tube lighting fixture with Lithium Ion battery having good back up complete with all accessories, connections, testing and commissioning etc. as required. (Havells make) 20 watt-LED (Havells/crompton/orient/Clear make) |
| 32 | Supplying and fixing G.I. Modular box of suitable size with modular plate and cover in recess/surface including providing and fixing 6 pin 20/25 amps modular socket outlet, 20/25 amps, modular MCB and three pin 20/25A plug top ,connections etc. as required. (Havells/Anchor make) |
| 33 | Providing and fixing hanging string/wire of 2 meters, pair, for hanging LED ceiling lights, complete with all accessories, connections, testing and commissioning etc. as required. Please Enable Macros to View BoQ information |
