|
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres leadas Nominal concrete 1:3:6 or richer mix(i/c equivalent design mix)asper specifications, approved drawing, design complete, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 2 | Dismantling doors, windows and clearstory window,ventilators shutters etc. ( steel or wood) including chokhats, architraves, hold fast and other attachements etc.omplete and stacking them 20 metres lead. of area 3 square metres and below as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government . |
| 3 | Dismantling wooden boardings in linng of walls and partitions, excluding supporting members but including stacking with in 50 me tres lead. Thickness above 10 mm up to 25 mm.as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government . |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tles 10mm to 25mm.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 5 | Dismantling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with in 50 metres lead.as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the |
| 6 | Demolishing brick work manually/by mechanical means including stacking of serviceable materials and disposal of unserviceable materials and disposal of unserviceable material within 50 metres lead in cement mortar as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government . |
| 7 | Second class brick masonry in common burnt clay F.P.S (Non modular) building bricks of class destignation 7.5 in in super structure above plinth level upto floor any level in cement mortar 1:6 (One Cement is to Six Sand), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 8 | 12mm (Tweleve milimetre) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and rounded angles any girth and finished even and smooth with cement mortar 1:6 (One cement isto Six sand) as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 9 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in Charge with cement mortar 1:4 ( 1cement:4 fine sand)including carriage of material with in all leads,lifts and other incidental.The rate including of octroi,royality,Malkhana, toll tax, GST or other taxes imposed by the government. |
| 10 | Applying Birla J.k. white wall care putty (two or more coats) over plaster surface after thoroughly brushing the surface free from mortar drops, dirt, dust, loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete upto all floor levels, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 11 | Wall painting (two coats) with acrylic premium emulsion paint of Asian/Nerolac and manufacture of approved shade for interior grade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 12 | Providing and fixing 600x600x10mm (Six hundred into six hundred into Ten milimetre)vetrified altra double charge/ Ultra charge vitrified tilesKajaria/ Somany / Nitco/Jonson/Simpolo/ Rak in flooring, on a bed of 20 mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 13 | Providing and fixing 600x600x10mm (Six hundred into six hundred into Ten milimetre)vetrified altra double charge/ Ultra charge vitrified tilesKajaria/ Somany / Nitco/Jonson/Simpolo/ Rak in skirting/dado, on a bed of 20 mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 14 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of JINDAL/Hindolo conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws,For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868 minimum anodic coating of grade AC15) all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :polyester powder coated aluminium(minimum thickness of polyester powder coating 50 (fifty) micron) for fixed portion as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 15 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of JINDAL/Hindolo conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws,For fixed portion for shutter of doors,windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber /neoprene gasket required (Fitting shal be paib for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868 minimum anodic coating of grade AC15) all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :polyester powder coated aluminium(minimum thickness of polyester powder coating 50 (fifty) micron) for fixed portion as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 16 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5mm (Fivemillimetre) thickness glass panes(weight not less than 12.50 kg/ sqm (Fifteen kilogram/Square metre)) of Modi guard Saint Gobin, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 17 | Providing and fixing anodised aluminium grill(anodised transparent or dyed to required shade according to is:1868 with minimum anodic coating of grade AC 15)of approved design/pattern with approved design/pattern,with approved standard section and fixed to the existing window frame with C.P brass/stainless screws @200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approval anodised aluminium standard section around the opening ,all complete asper specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 18 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood partical board conforming to IS: 12823 Grade I Type II,in panelling fixed in aluminum doors,windows shutters and partition frames with C.P. brass/stainless steel screws etc. complete as per architectural drawings pre-laminated partical board with decorative lamination on one side and balancing lamination on other side. as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government . |
| 19 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge Extruded section profile size 42x50 mm |
| 20 | Providing and fixing to existing door frames.24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 21 | Providing and fixing 200mmx10mm (Two hundred milimetre into Ten milimetre) aluminum tower bolts (Barrel type) make of PILOT/SHEEL or equivalent anodized transparent or dyed to required shade and colour with screws etc. complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 22 | Providing and fixing 150mmx10mm (one hundred milimetre into Ten milimetre) aluminum tower bolts (Barrel type) make of PILOT/SHEEL or equivalent anodized transparent or dyed to required shade and colour with screws etc. complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 23 | Providing and fixing 125mm (One hundred twenty five milimetres) size aluminium anodized make of PILOT/ Sheel handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 24 | Providing and fixing 100mm (One hundred milimetres) size aluminium anodized make of PILOT/ Sheel handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 25 | Providing and fixing 250x16mm(Two hundred fifty into Sixteen milimetres) size anodized aluminum sliding door bolts anodized colour and shade with necessary bolts, nuts and screws etc. completed within all leads, lifts of materials and other incidentals. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 26 | Providing and fixing aluminium hanging floor door stopper, ISI marked,(Twin rubber stoper) anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or Dyed to Required colour and shade, with neccessary screw etc complete.as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government |
| 27 | Providing and fixing 250mm(Two hundred millimetre)bright finished hrad drawn hooks and eyes with screws complete,)as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 28 | Providng, supplying,transporting, and fixing a complete cup board of of overall size 600mm(W)x500 mm(D)x1950 mm(H),fabricated from 18 gauge mild steel(MS) sheet, comprising 4(four)fixed shelves,with locking arrangements,all welded and finished including surface prepartion,anti-rust treatment,and powder coated finish, complete in all respectas per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 29 | Providing,supplying,transporting and fixing single mild steel bed box with integrated storage of overall size 1950mmx450mm(LxWxH),fabricated with mild steel frame of approved section,incorporating 18 gauge MS sheet base/platform and 12mm thick commercial board of unioply/greenply/Centryply/Kit ply/Dura Ply at top, properly cut and fixed over the frame, complete with welding, grinding,smooth finishing,anti-rust primer treatment and powder coated finish,including all necessary fittings,fasteners, loading,unloading,shifting to respective rooms and installation at site at site complete in all respectas per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 30 | Providing,supplying,transporting and fixing Study Tableof overall size 750mmx600mmx750(LxWxH),fabricated with 18 gauge mild steel Square pipe of 25mmx25mm frame section,including 18mm thick commercial board of unioply/greenply/Centryply/Kit ply/Dura Ply at top, properly cut edge finished and fixed over the frame,complete with welding, giinding,smooth finishing,anti-rust,primer treatment and powder coated finish,including all necessary fittings,fasteners, loading,unloading,shifting to respective rooms and installation at site complete in all respect as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 31 | Providing and fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch,including fixing with polymer coated 'j' or L hooks,bolts &nuts 8mm dia.G.I. plain/bitumen washers complete but excluding the cost of purlins,rafters,trusses, etc.The sheet shall be manufactureed out of 2400 TEX panel rovigs incorporating minimum0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured.They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent,clear or pigmented,textured or smooth as specified 2mm thick corrugated 2.5\\" or 4.2\\" or 6\\") or step-down(2\\" or 3\\"or 6\\") as speified. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 32 | Structural steel work riveted,bolted or welded in built up sections,trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government. |
| 33 | Excavation in foundation, trenches etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any height stacking the excavated soil not more than 3 metres (Three metres) clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 34 | Excavation in foundation, trenches etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any height stacking the excavated soil not more than 3 metres (Three metres) clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth in drain and channel as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 35 | Providing and layingmechanically mixed and vibrated plain cement concrete in foundation and plinth,as per drawing and Morth technical specificatons section 800,900,&1200 for nominal mix 1:5:10 (one cement:five sand:ten graded stone agg.40mm (forty milimeter)nominal size) and curing complete as per direction of Engineer-in-Charge and as per the drawing andcarriage of labour,equipments and materialsto various location through transporation in all leads, and other incidential complete in all respect. |
| 36 | Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 110 mm dia(Hundred ten milimetre)having minimum pressure 4.50 kg.per cm2 PVC pipe extending through the full width of the structures with slope of 1(v):20(H) towards drainage face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 as per direction and entire satisfaction of Engineer-in -charge including carriage of material.The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. including octroi, royality, toll tax, sale tax or other taxes imposed by the Government. |
| 37 | Back filling behind abutments, wing walls and return walls with slected hard stone complete as per drawing and M.O.R.D. technical specification clause 1203 and 1604 and other incidentials and to the entire satifaction of the Engineer- in-Charge. The rate including of octroi,royality,Malkhana, toll tax, GST or other taxes imposed by the government. rate |
| 38 | Providing and laying cement concrete 1:4:8 ( One Cement isto four Sand isto eight graded crushed stone aggregate 40 mm (forty milimetre) nominal size mechanically mixed and curing complete excluding the cost of form work. in foundation and plinth, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 39 | Providing and laying mechanically mixed and vibrated, concrete for plain cement concrete in All work up to plinth level open foundation of all type of structure complete, grade- M-20 (M twenty) nominal mix 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 40mm (Forty milimetre) nominal size with minimum cement contents not les than of 330 (Three hundred thirty) Kilogramme Per Cubic metre with 20mm (Twenty milimetre) nominal size graded crushed stone aggregate and curing complete, for all heights/ depths including the cost of form work as per drawings and MORD technical section 800, 900 and 1200 and as per the direction of Engineer-in-Charge. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 40 | Supplying,filling,spreading & leveling stone boulders of size range 5cm to 20cm,in recharge pit, in the required thickness, complete. as per the direction of Engineer-in-Charge. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 41 | Providing form work with steel plates 3.15mm. (Three decimal one five milimetre) thick welded with angle iron frame of 30x30x5mm (Thirty milimetre into thirty milimetre into five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights/depths of propping and centering below supporting floor to ceiling for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with slopping or stepped soffits excluding landing, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. |
| 42 | Providing and fixing G.I chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2mm dia wire or nuts,bolts and washers as requird complete.made of G.I wire f dia.4mm ,PVC coated to achieve outer dia not less than 5mm inrequired colour and shade., as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government. Please Enable Macros to View BoQ information |
