|
| 1 | 20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even & smooth in cement mortar 1:6(1cement:6sand) with in all leads & lifts. |
| 2 | Demolition of cement concrete in flooring in1:2:4 (1 cement:2 sand:4 graded) including disposal of the waste material complete in all respect as per entire satisfaction of Engineer-in-charge. |
| 3 | Cement concrete flooring 1:2:4(1cement:2sand:4 graded ) complete in all respect as per entire satisfaction of Engineer-in-charge. |
| 4 | 6mm thick ceiling plaster in C.M 1:3 ( 1 cement:3 sand) in all leads and lifts complete in all respect as per entire satisfaction of Engineer-in-charge |
| 5 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 cement:3 sand: 6 graded stone agg. 20mm nominal size and including finshing the top surface of concrete smooth. |
| 6 | Distempering with oil bound distemper of approved brand and manufacture (two coats) and of required shade on decorated wall surface to give an even shade over and i/c a priming coat whiting after throughly brushing the surface free from mortar and other foreign matters incluidng preparing the surface even and sand papered smooth. |
| 7 | Painting one coat (excluding priming coat) on new steel and other metal surface with ready mixed paint and brushing to give and even shade including cleaning of all dirt and dust and other foreign matter and sand papering and stopping with ready mixed paint other than white. |
| 8 | Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materia with in all leads and lifts. |
| 9 | Providing and fixing M.S.fan clamp of 16mm dial M.S. Bar bent to \\"U\\" shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete. |
| 10 | P/F of PVC pipe 80mm dia. With clamps for safe disposal of rain water from roof compelte in all respect as per entire satisfaction of Engineer-in-charge. |
| 11 | P/F of PVC bend 80mm dia. compelte in all respect as per entire satisfaction of Engineer-in-charge. |
| 12 | P/F of PVC Socket 80mm dia. compelte in all respect as per entire satisfaction of Engineer-in-charge. |
| 13 | Wiring for Sub main wiring with following size of PVC insulated conductor single core cable in surface/recessed PVC conduit as required (2.5 sqmm) of finlex/plaza ISI make approved make by HPSEB Department complete in all respect within all leads and lifts as per direction and satisfaction of Engineer-in-charge. |
| 14 | Wiring for Sub main wiring with following size of PVC insulated conductor single core cable in surface/ recessed PVC conduit as required (1.00 sqmm) of finlex/plaza ISI make approved make by HPSEB Department complete in all respect within all leads and lifts as per direction and satisfaction of Engineer-in-charge. |
| 15 | Providing and fixnig holder for bulbs Anchor/Havells/Syska make complete in all respect as per entire satisfaction of Engineer in charge. |
| 16 | Providing and fixing round electrical fan sheet compelte in all respect as per entire satisfaction of Engineer in charge. |
| 17 | Providing and fixing round electrical holder sheet compelte in all respect as per entire satisfaction of Engineer in charge. |
| 18 | Providing installation and commissioning and testing of LED bulbs 20 watts fitting including 90 degree GI bend choke reflector of Bajaj/Crompton/Greaves make complete in all respect as per entire satisfaction of Engineer in charge. |
| 19 | Providing fixing testing and comissioning of ceiling fan 1200mm (Category-A) and regulator including wiring of the down rod of standard length (upto 30 cm) with 1.5 Sqmm PVC insulated copper conductor single core cable etc. As required complete in all respect as per entire satisfaction of Engineer in charge. |
| 20 | Providing & fixing 3 pin socketoutlet on the existing switch box/cover including connection etc. As required complete in all respect as per entire satisfaction of Engineer in charge. |
| 21 | 5/6 Ampere |
| 22 | 15/16 Ampere |
| 23 | Supplying and fixing wooden box 50mm deep on surface or in recessed with suitable size pharolic sheets laminated in the front including P/F 3 pin 5/6 ampere socket outlet and 5/6 amp Tumbler/piano type switch connection painting as required (for power plug) complete in all respect complete in all respect as per entire satisfaction of Engineer in charge. |
| 24 | 200mm x 120mm |
| 25 | 120mm x 120mm |
| 26 | Providing wood work in frames of doors, windows and other frames wrought framed and fixed in position with second class deodar wood. |
| 27 | Excavation in foundation and trenches etc. in all kind of soil such as pick work ,jumper work blasting soft/hard rock by chiseling where the blasting work is prohibited slushy, daldal and saturated soil including pum pumping or bailing out water with in all heights stacking the excavated soil with in all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15 cms, layers when required into plinths sides of foundation consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth complete in all respect with in all lead and lifts as per direction & satisfaction of Engineer - in - charge. |
| 28 | Providing and laying cement concrete 1:4:8 (1 Cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of for work in foundation and plinth within all leads and lifts. |
| 29 | Providing and laying cement concrete 1:3:6 (1 Cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of for work in foundation and plinth within all leads and lifts. |
| 30 | Providing and laying cement concrete 1:2:4 (1 Cement:2 sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost for work in:- |
| 31 | Foundation and plinth with in all leads and lifts. |
| 32 | Wall (Any thickness but not less than 0.10 mtr. thickness attached pillasters, buttresses, plinth and string courses etc. From top foundation level upto floor level including entire carriage of material with in all angle iron 30x30x5mm so as to give a fair finish including cenetring, shuttering, stritting and proping etc. with wooden batten and ballies heoght of proping and centring below supporting floor to ceiling not exceeding 4 mtr and removel of the same for insitu reinforcement concrete and plinth concrete work in vertical surface such as wall (any thickness) partitions and the like including pillasters, butteresses plinth and string course and the like including entire carriage of material with in all leads and lifts. |
| 33 | Providing form work with steel plates 3.15 mm. thick welded with angle iron frame 30x30x5mm so as to give a fair finish including centring shuttering, strutting & propping etc. with wooden battens and ballies height of propping & centring below supporting floor to ceiling not concrete and plan concrete work in:- |
| 34 | In vertical surfaces such as (any thickness ) partions and the like incluidng attached pillasters buttresses, plinth and string courses and the like with in all leads and lifts Providing Tore steel reinforcement for RCC work including bending. |
| 35 | Providing Tor steel reinforcement for RCC work including bending, binding and placing complete upto floor two level complete in all leads and lifts. |
| 36 | P/F of Cast iron alfa valves of 250mm dia. With in all leads and lifts as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
