|
| 1 | Excavation in foundation and trenches etc. in all kind of soil such as pick work ,jumper work blasting soft/hard rock by chiseling where the blasting work is prohibited slushy, daldal and saturated soil including pum pumping or bailing out water with in all heights stacking the excavated soil with in all leads and lifts clear from the edge of excavation and then returning the stacked soil in 15 cms, layers when required into plinths sides of foundation consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth complete in all respect with in all lead and lifts as per direction & satisfaction of Engineer - in - charge. |
| 2 | Dismentaling of Galvanised mild steel tube (LG) incluidng fiting (earth work in trenches to be measured and paid separately) as per direction and satisfaction of Engineer-in-charge of the following nominal bore. |
| 3 | GI pipe 50mm dia |
| 4 | GI pipe 40mm dia |
| 5 | GI pipe 32mm dia |
| 6 | GI pipe 25mm dia |
| 7 | Relaying, Jointing and testing of Galvanised mild steel tube (LG) incluidng fiting (earth work in trenches to be measured and paid separately) as per direction and satisfaction of Engineer-in-charge of the following nominal bore. |
| 8 | GI pipe 50mm dia |
| 9 | GI pipe 40mm dia |
| 10 | GI pipe 32mm dia |
| 11 | GI pipe 25mm dia |
| 12 | Laying,, Jointing and testing of Galvanised mild steel tube (LG) incluidng fiting (earth work in trenches to be measured and paid separately) as per direction and satisfaction of Engineer-in-charge of the following nominal bore. |
| 13 | GI pipe 50mm dia |
| 14 | GI pipe 40mm dia |
| 15 | GI pipe 32mm dia |
| 16 | GI pipe 25mm dia |
| 17 | Providing and fixnig G.I. Sockets heavy duty ISI marked complete fixing at site compelte in all respect within all leads and lifts as per direction and satisfaction of Engineer-in-charge. |
| 18 | 50mm Dia |
| 19 | 40mm Dia |
| 20 | 32mm Dia |
| 21 | Providing and fixnig G.I. Unions heavy duty ISI marked complete fixing at site compelte in all respect within all leads and lifts as per direction and satisfaction of Engineer-in-charge. |
| 22 | 50mm dia |
| 23 | 40mm dia |
| 24 | 32mm dia |
| 25 | Providing and fixing of Bir/Kartar make Cast iron Double flanged sluice valve of class ASA 150 as per relavant Is standards with stand nominal seat pressure 20.00 KG/Cm Sqr. Conforming to IS BS:1868/API-600 (latest with up to date amendments of any complete in all respects with in all leads and lifts as per direction and satisfaction of Engineer-in-charge having following nominal dimeters. |
| 26 | 50mm dia |
| 27 | Providing electric welding (Triple layer) at site with diesel Engine Generator welding set required for repair of various dia. G.I. Pipes at different RD's to stop the leakage problem including cost of carriage of Generator set at site with in all leads and lifts and as per entire satisfaction of Engineer-in-charge. |
| 28 | 80mm dia |
| 29 | 50mm dia |
| 30 | 40mm dia |
| 31 | 32mm dia |
| 32 | Supply & erection of PVC Jointless flat water proof cable 16mm² suitable size as per BIS 694-1990 (Latest with upto date ammendments) suitable for the pump set offered from OCB to motor, motor to starter including all other electrical equipment such as thimble, flexible nut & bolts, cable gland etc. laid in pipe of trenches under floor. The type & make will be subjected approval of HPSEBL authoroties in case of non acceptance by HPSEBL authoroties it shall have to be replaced by the tender free of cost. |
| 33 | P/F of oil immersed star delta starter 45 HP of MEI/Kilburn make of following rating including initial oil filling and cost of making all connection with theimbles of required ratings and carriage upto site of work complete within all leads and lifts as per entire satisfaction of the Engineer-in-charge. |
| 34 | Disjointing, dismantling RCC pipe of following dia. Class NP-2 including cost of stacking of pipe on the site disjointing of joints complete in all respect. |
| 35 | (i) RCC pipe 250mm dia. |
| 36 | Relaying/Rejointing dismantled RCC pipe of following dia. Class NP-2 after removing the blockage including cost of new joints, rubber gasket and testing compelte in all respect. |
| 37 | (i) RCC pipe 250mm dia. |
| 38 | P/L, jointing and testing reinforced cement concrete light duty non pressure pipe class NP-2 suitable class and spigotted and socketted end type precast reinforced concrete pipe of following internal dia meter including testing of joints complete confirming to Is 458-2003 or latest with upto date amendments complete with rubber ring type II duly ISI marked as per IS:5382-1985 or latest with uptodate ammendments and filling of joints in cement motor 1:2 (1 cement:2 sand) with in all leads and lifts as per direction of the Engineer-in-charge and testing of joints and laying shuld be as per IS 783-1985 or latest with upto date ammendments with in all leads and lifts as per direction and satisfaction of the Engineer-in-charge. |
| 39 | From O/L No. 2 to O/L No. 3 |
| 40 | P/F of cast iron alfa valve of following dia. Within all leads and lifts as per the direction of Engineer-in-charge |
| 41 | RCC pipe 250mm dia. Please Enable Macros to View BoQ information |
