Tender For Advertised Rate List/ Bill Of Quantities For Stage Contract For Repairment Of Dysfunctional Toilets At 1. Ms Tantray Basti, 2. Ms Dhal Bala 3. Ps Mir Mohalla Misribehak ................................Adv Cost (0.35 Lacs For Each School)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Apr 2026
0 days left
EMD
2100
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lolab → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Advertised Rate List/ Bill Of Quantities For Stage Contract For Repairment Of Dysfunctional Toilets At 1. Ms Tantray Basti, 2. Ms Dhal Bala 3. Ps Mir Mohalla Misribehak ................................Adv Cost (0.35 Lacs For Each School)
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, as directed by enginee-All kinds of soil |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m,including getting out excavated earth and disposal of surplus excavated earth in all kinds of soil |
| 3 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc .upto required depth ) and for shafts, wells, cesspits including dressing of sides and ramming of bottoms , including getting out excavated earth and disposal of surplus excavated earth as directed, ( All kinds of Soil) |
| 5 | Supply and laying of dry stone soling (hand packed) in foundation trenches and ramming, including all leads, lifts cost and carriage of materials involved complete. |
| 6 | Supply and filling of RBM /Nallah Muck/Stone soling of specified size including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacity including carriage of the same from approved source upto site of work complete |
| 7 | Supply and filling of Khak bajri including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacity including carriage of the same from approved source upto site of work complete ( for Berm) |
| 8 | Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 4: 8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size Crushed, including all leds, lifts cost & carriages of materials upto site fo work complete. |
| 9 | Providing & laying in position specified grade of cement concrete, including the cost of centering, shuttering, finishing. All work up to plinth level in 1: 3: 6 (1 cement: 3 coarse sand: 6 graded stone aggregate) 20mm nominal size Crushed, including all leds, lifts cost & carriages of materials upto site fo work complete. |
| 10 | Providing and laying in position cement concrete of specified grade including curing excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) including all leads, lifts, costs and carriages upto site of work complete job |
| 11 | Providing & laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing, reinforcemet. All work up to plinth level in 1: 2: 4 (1 cement: 2coarse sand: 4 graded stone aggregate) 20mm nominal size Crushed, including all leads, lifts costs and carriages of materials upto site of work complete. |
| 12 | Providing & laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. All work up to plinth level in 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate) 20mm nominal size Crushed, including all carriages of material involved upto site of work |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 14 | P/L 50mm thick Cement concrete coping with cement conc. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone agg. 20mm nominal size with all leads lifts cost & carriages of materials involved upto site of work complete. |
| 15 | P/L 50mm thick Cement concrete flooring 1: 2: 4 (1 cement: 2 course sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry but, excluding the cost of nosing of steps etc. complete with 20mm nominal size stone aggregate (Crushed), including all carriages complete. |
| 16 | P/L 25mm thick Cement concrete flooring 1: 2: 4 (1 cement: 2 course sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry but, excluding the cost of nosing of steps etc complete with 20mm nominal size stone aggregate (Crushed), including all carriages complete. |
| 17 | Reinforcement for R.C.C work, including straightening, cutting, bending, placing in position and binding all complete with Thermo-mechnically treated bars of grade Fe-500 or more, including all carriages of material involved upto site of work complete |
| 18 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including all leads, lifts, costs & carriages of materials upto site of work complete |
| 19 | Structural Steel work welded in built up sections / framed work (angle iron, Flate iron, Gusset plates, chanells etc) including cutting, hoisting, fixing in position angle iron/ flat iron and including Painting of two or more coats including primining coat of red oxide including all leads, lifts, costs & carriages of materials upto site of work complete |
| 20 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete first class Poplar wood including all leads, lifts, costs & carriages of materials upto site of work complete |
| 21 | Providing corrugated G. S. sheet roofing 0.50 mm thick with zinc coating not less than 275 gram/m2 including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. incl all costsand carriages complete job |
| 22 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work. including all carriages of material upto site of work complete. |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new wood work and wood based surfaces. including all carriages of material upto site of work complete. |
| 24 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturer’s specifications with Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/ 10sqm of approved brand and manufacture incl all costs and carriages complete |
| 25 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) including all leads, lifts, costs and carriages upto site of work complete job |
| 26 | Finishing walls with Textured exterior Excel paint of approved brand and manufacture to give an even shade with two or more coats on new work with priming coat and repairing of scratches by applying wall putty for exterior work. including all carriages of material upto site of work complete. & scafolding charges complete. |
| 27 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0mm thick glass panes including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 28 | White washing with lime to give an even shade on new work(Three or more coats) to parapets,Guide stones,Tree Trunks etc incld cost and carriage complete. |
| 29 | Lettering with black Japan paint of approved brand and manufacture |
| 30 | Dismentalling of Reinforced cement concrete and stacking of serviceable materials (Steel) and disposal of unserviceable material beyond site as per directions of engineer incharge at site. |
| 31 | Demolishing of cement concrete including disposal of unserviceable material beyond site as per directions of engineer incharge at site. |
| 32 | Dismantelling/ demolishing of stone masonary including disposal of same including stacking of serviceable material and disposal of unserviceable material as per the directions of Engineer incharge at site. (Dismentalled/ serviceabale materials to be reused at site of work) |
| 33 | Dismantelling/ demolishing of Brick masonary including disposal of same including stacking of serviceable material with removing of mortor from serviceable bricks and disposal of unserviceable material as per the directions of Engineer incharge at site. (Dismentalled/ serviceabale materials to be reused at site of work) |
| 34 | Providing and laying 50mm thick interlocked cement concrete tiles of approved quality Rubber moulded (anti skid) for path of required shape,size,colour laid over a bed of 50mm thick sand cousion over a bed of 75mm thick lean concrete in 1:4:8 mix laid over 100mm thick stone soling including cost of cement concrete side blocks of 12\\" x 6\\" size laid in cement concrete 1:2:4 mix (1 cement: 2 course sand: 4 graded stone aggregate) including polishing,cleaning of Tiles. All inclusive with labour, cost & carriage of all involved materials complete job. |
| 35 | Random rubble masonry with hard stone from quarry in foundation and plinth in cement mortar 1:6 (1cement : 6 course sand), including leveling up with cement concrete 1:6:12 (1cement: 6 course sand: 12 graded stone aggregate 20mm nominal size) at plinth level with all leads lifts cost & carriages of materials involved upto site of work complete |
| 36 | Dry Random Rubble masonry in foundation and plinth using quarry stones with bond stones all leads lifts cost & carriages of materials involved upto site of work complete. |
| 37 | Dry random rubble masonry with hard stone from Nallah with bond stone in foundation and plinth including all leads, lifts, costs and carriages upto site of work complete job |
| 38 | Centering & Shuttering using kitply including strutting propping etc & removal of form work including all leads, lifts, costs & carriages upto site of work complete in Foundation footings, Basis of colums, Plinth beams, walls & Mass concrete |
| 39 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 40 | Suspended floor, Roofs, Landings, Balconies, Beams, Lintels, stairs, stair landings |
| 41 | Edges of slabs under 20cm |
| 42 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length. (Including head load if any) Imported Wood including all leads, lifts, costs and carriages upto site of work complete job |
| 43 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all leads, lifts, costs and carriages upto site of work complete job |
| 44 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade including all leads, lifts, costs and carriages upto site of work complete job |
| 45 | Providing and laying vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (600x600mm) including all leads, lifts, costs and carriages upto site of work complete job |
| 46 | Providing and applying 2mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including all leads, lifts, costs and carriages upto site of work complete job |
| 47 | Providing and laying of cement concrete rings 3'-00\\" wide dia in soakage pit including excavation and a cover slab with height of each ring 6 inches all complete |
| 48 | Providing and fixing rectangular high density polyethylene water storage tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. per liter capacity |
| 49 | Providing & fixing 3 layer PP-R (Poly Propylene Random copolymer) pipes SDR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings I/C fixing the pipe with clamps at 1.oom spacing of Prince, Supreme, Vectus or equivalent ( heavy duty) make. This includes cost of cutting chases and making good the same incl testing of joints complete as per direction of Engineer-in Incharge. (Concealed work incl cutting chases and making good the walls etc) PN -16 pipes, 25 mm OD |
| 50 | Providing and fixing 15 mm nominal bore C.P. brass bib cock ofapproved quality conforming to IS : 8931 like Jaquar, cerra, Jhonson or equivalent incl all costs and carriages |
| 51 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality like Jaquar, cerra, Jhonson or equivalent make, weighing not less than 1.970 kg. |
| 52 | Providing and fixing CP Brass Single lever telephonic wall mixer ofquality & make as approved by Engineer in charg like Jaquar, cerra, Jhonson or equivalent make e 15 mm nominal dia |
| 53 | Providing and fixing 15 mm nominal bore C.P. angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 incl all costs and carriages complete |
| 54 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 55 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 56 | P/F of CP Health faucet with shower and flexible tube upto 1.2 metre long with SS triangular plate to European type W.C. of quality and approved make like like Hindware, Cera, or equavalent as approved by Engineer - in - charge. |
| 57 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 58 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm P.V.C or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests of approved brand like Hindware, Cera, or equavalent including all leads, lifts, costs and carriages upto site of work complete job |
| 59 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required with W.C. pan with ISI marked of approved brand like Hindware, Cera, or equavalent white solid plastic seat and lid. |
| 60 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 61 | Providing and fixing CP/stainless steel anti cockroach 100mm dia Grating on floor traps |
| 62 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face withconcealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 63 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 64 | Providing and fixing P.V.C Soil, waste, Rain water Pipes,vent pipes ISI mark like Prince B-type or equivalent including all fittings with or without access of any degree i.e bends, junctions, cowls, offsets, access pieces, holder bats and structure steel fabricated supports, clamps for suspended pipes in ceiling, stays, through ducts, etc and jointing with solvent/seal joints including cutting holes in walls and floors incl all neseccary fittings like bends, sockets Tees etc 100 mm dia |
| 65 | 75 mm dia |
| 66 | Providing and fixing Panelled or Panelled and glazed Shutters of Imported wood for doors, windows and clerestorey windows using 3.5mm thick float glass panes or 12mm thick prelaminated boared with decorative lamination on both sides including ISI marked MS pressed Butt hings bright finished of required size with necessary screws of Ist class Imported wood 30mm thick incl all leads, lifts, loading unloading, cost and carriages with head load of materials involved upto site of work complete job |
| 67 | P/F Aliminium anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. of reputed make and model as directed and approved by Engineer in charge incl cost of necessary screws nails etc complete in all respects |
| 68 | Handles 125mm |
| 69 | Towerbolts 150mm |
| 70 | Handles 100mm |
| 71 | Towerbolts 100mm |
| 72 | Al Drop with inbuilt Lock |
| 73 | Providing and fixing nahani or gully trap with 100 mm steel gratings floors complete job |
| 74 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore. |
| 75 | 12mm thick cement plaster of mix 1:4 (1 cement: 4 coarse sand), including all carriages of material involved upto site of work complete. |
| 76 | 12mm thick cement plaster of mix 1:6 (1 cement: 6 coarse sand), including all carriages of material involved upto site of work complete. |
| 77 | Raised and cut pointing on stone work with cement mortar 1:3 (1cement : 3 fine sand) for plinth, including all carriages involved upto site of work complete |
| 78 | Flush Pointing on Stone work in cement mortar 1:3 inlcuding all leads lifts costs & carriage of materials upto to site of work complete |
| 79 | Engagements of JCB for excavation of earth etc, uprooting & removal of stumps / tree trunks & roots for various nature of works complete job |
| 80 | Engagement of labour /Mazdoor for carrying out works not listed the SSR |
| 81 | Engagement of skilled labour with all machinary like cutters, axe etc for pruning branch cutting of the trees and other similar nature of works |
| 82 | Pumping out water caused by springs, tidal or river seepage, broken watermains or drains and the like other than those items were minimal dewatering is included as per book of specifications. |
| 83 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal beyond site as per directions of engineer incharge at site complete |
| 84 | Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement mortar 1: 6 (1 cement: 6 coarse sand), including extra for brick work in superstructure above plinth level up to Floor-V level, including all carriages of material involved upto site of work complete. |
| 85 | Felling trees of the girth (Measured at the height of 1 m above ground level ) including cutting of trunck and branches ,removing the roots and stacking the serviviable material and disposal of unserviceable material. Beyond 30cm Girth upto and including 60cm girth |
| 86 | Beyond 60cm Girth upto and including 120cm girth |
| 87 | Beyond 120cm Girth upto and including 240cm girth |
| 88 | Above 240cm Girth |
| 89 | Lighting Points :- One Lighting point shall incl. Wiring for lighting points in 1.5Sq mm PVC insulated Copper wire & 2.5Sq mm PVC insulated multi-strand Copper wire for lighting Sub –mains, 6 Amp one way switch , 2mm thick PVC conduit/ Channel with bends , Junction boxes etc, 6Amp S pole MCB,10 Amp DP MCB , 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. |
| 90 | Heating points :- One Heating point shall incl. Wiring for heating points in 2.5Sq mm PVC insulated Multi-Strand Copper wire & 4 Sq mm PVC insulated multi-strand Copper wire for heating Submains, 16 Amp switch socked combined , 2mm thick PVC conduit/ Channel with bends , Junction boxes etc, 10Amp S pole MCB, 2 way DB forHousing MCB and Hylem Sheet with wooden box recessed in walls with accessories |
| 91 | Fan Point: One Fan Point shall incl. Wiring for fan points in 1.5Sq mm PVC insulated multi-strand Copper wire for 1200mm ceiling/225mm Exhaust fan with ceiling roses and PVC square block 350W electronic fan dimmer 2mm thick PVC conduit/Channel with bends , Junction boxes etc, 6Amp S pole MCB,10 Amp DP MCB , 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories. |
| 92 | Providing of Geotech Photographs of each item of work minimum 3 sets (One set comprising of Photograpgh before,during and after execution of work of size 26cmx21Cm |
| 93 | Note: Any other item not covered in the BOQ, if required to be executed at site shall be paid strictly as per the rate mentioned in JKSOR-2022/LMR minus the quoted percentage by the bidder Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Apr 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedApr 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender