|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 2 | M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete of Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 3 | M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 4 | M&L for mild steel as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 5 | M& L for Hard drawn steel wire fabric exc 4 kg/sqm cut to lengths, bent to shape required including welded to iron frame work of any size complete all as specified and directed. |
| 6 | M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 including Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and directed. |
| 7 | M&L for walling of random rubble, coursed, well bonded, bedded and solidly hearted, built in CM 1:4 including Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and directed. |
| 8 | M&L for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses Complete all as specified and directed. |
| 9 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed |
| 10 | M&L for providing, cement concrete 1:2:4 type B1 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided in , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 11 | M&L for extra for forming fair finished drain or channel up to 30 cm inner girth in cement concrete, using extra cement including forms/moulds/mitred stopped ends complete all as specified and directed. |
| 12 | M&L for cement concrete 1:4:8 type D-2 using 40 mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 13 | M&L for preparing new surfaces of steel of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed |
| 14 | Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 15 | M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub-bases complete all as specified and directed. |
| 16 | M&L for coloured heavy duty Non skid ceramic tiles 10 mm thick parking /exterior tiles polished, area of each tiles not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match with 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes including dismantling of floor tiles complete all as specified and directed. |
| 17 | M&L for providing, 75mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) complete all as specified and directed. |
| 18 | M&L for machine cut Kota stone slab flooring 20 to 25mm thick as in floor, cooking platform, treads etc. laid over 20 mm screed bed or bedding layer in CM 1:6 set and jointed in neat cement slurry and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing by machine including Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 19 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment over 25 mm thick sand cushioning complete all as specified and directed. |
| 20 | M&L for 20 cm x 20cm x 25 mm thick Chequered cement concrete tiles (in any colour & shape), set, jointed and pointed in neat cement slurry in floors with grey cement & no pigment over and including 20 mm screed bed in CM 1:6 complete all as specified & directed. |
| 21 | S & F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails including securing or tying with and provision of galvanised MS wire staples or steel pins etc complete all as specified and directed. |
| 22 | S&F in repair for concertina coil fencing with punch tape concertina coil 600 mm dia having 10 round/ RM upto 4 mtr height of wall with angle iron 'Y' shape complete all as specified and directed. Note:- Mild steel angle iron shall be measured and paid separately. |
| 23 | M&L for rendering 10mm thick on stone/brick masonry surfaces in cement mortar 1:6 finished even and smooth (without using extra cement) including taking down of cement plaster of any description including racking out of joints hacking for keys and scrubbing down with water etc complete all as specified and directed. |
| 24 | M&L for rendering 15mm thick on stone/brick masonry surfaces or other than fair faces in cement mortar 1:4 finished even and smooth (without using extra cement) including Taking down of cement plaster of any description including racking out of joints hacking for keys and scrubbing down with water etc. complete all as specified and directed. |
| 25 | M&L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over chalk whiting, white or tinted complete all as specified and directed. |
| 26 | M&L Preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed. |
| 27 | M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in floor complete all as specified and directed. |
| 28 | M&L for Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:6 including dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed. |
| 29 | M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:6 including dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed. |
| 30 | M&L Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:6 including dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed. |
| 31 | M&L for coloured glazed ceramic tiles as in skirting/ dado (350x250 or 450x350) x 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile over backing coat/screed bed 10mm thick in CM1:4 on fair faces of brick/stonewall surfaces for laying on dado/skirting including dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 32 | M&L Glazed ceramic coloured tiles (Designer) in vertical surface (rectangular/square) polished, area of each tiles exc .36 sqm but not exceeding 1.00 sqm, 7/8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 backing coat for fixing wall tiles including dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 33 | M & L WPC 15 mm thick panelling for wall/ceiling complete including dismantling of wall and ceiling boards or insulation boards/slabs/blankets, complete all as specified and directed. |
| 34 | Supply & fixing in position, 6 mm thick E board (classic) of size 610x610 mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25 mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including GI 3 mm adjustable suspender of required length of any description complete all as specified and directed. |
| 35 | M & L for 3mm thick ACP sheet panelling in ceiling/ wall Cladding plain of approved colour / shade to beam / column / slab in circular / rectangular shape including all off sets, bending and clits wherever required to give the required shape and shape and design and silicon filling the joints using water proofing sealant including suspension wire wherever required using and fabricating aluminium tubular hollow section 25mmx25mm frame work of size not exceeding 900mm c/c on existing MS pipe purlin / rafter / column to hold ACP cladding etc complete all as specified and directed. |
| 36 | S&F in repair plywood grade BWR type BB, 9mm thick fixed with nails to timber frame work in wall/ ceiling complete all as specified and directed. |
| 37 | S&F in repair Veneered decorative plywood, 9mm thick grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in ceiling/wall complete all as specified and directed. |
| 38 | M&L 2nd class softwood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall/ceiling panelling 15mm including cornice and beading as required and applying two coats of polishing over one coat of sealer after preparation of the surface, including dismantling of wall and ceiling boards or insulation boards/slabs/blankets complete all as specified and directed. Note : Framework shall be measured and paid separately. |
| 39 | M & L Plain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section, clean swan, secured nails. |
| 40 | M&L for preparation of newly un treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed. |
| 41 | M & L second class soft wood in scantling clean swan below or above ground level upto four storey bldg, including Dismantling timber scantling 40 Sqcm and over in section in any position complete all as specified and directed. |
| 42 | S&F steel tubes medium grade 'galvanised' with and including all fitting and fixed to walls and ceiling or laid in floors of 20 mm bore. including taking up or down steel tubing and connections complete all as specified and directed. |
| 43 | S&F steel tubes, medium grade 'galvanised' with and including all fitting and fixed to walls and ceiling or laid in floors of 15 mm bore. including taking up or down steel tubing and connections complete all as specified and directed. |
| 44 | S&F in Repairs 15mm dia chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 45 | S&F in repairs 15mm dia Brass CP wall/basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 46 | S&F in repairs Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 47 | S&F in repairs 15mm dia chromium plated fancy type Stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 48 | S&F in repairs stainless steel Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 49 | S&F in repair 10 litres, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 50 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 51 | S&F in repair Grating doom 100mm dia of PTMT (minimum weight 25gms) suitable for floor taps, complete all as specified and directed. |
| 52 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat and cover complete all as specified and directed. |
| 53 | S&F in repairs 15mm dia, Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 54 | S&F in repairs Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union 125mm size complete all as specified and directed. |
| 55 | S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 56 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 57 | S&F 75 mm bore PVC SWR pipe single socketed (ISI Marked) any length with rubber ring joints complete fittings etc fixed to wall with MS clamps 8mm dia with two nuts wall nails etc complete all as specified and directed. |
| 58 | S&F 110 mm bore PVC SWR pipe single socketed (ISI Marked) any length with rubber ring joints complete fittings etc fixed to wall with MS clamps 8mm dia with two nuts wall nails etc complete all as specified and directed. |
| 59 | S&F 75 mm bore PVC SWR pipe single socketed (ISI Marked) any length with rubber ring joints complete fittings etc fixed to wall with MS clamps 8mm dia with two nuts wall nails etc or laid in trenches, in floors including dismantling AC Pipe/PVC pipes complete all as specified and directed. |
| 60 | S&F 110 mm bore PVC SWR pipe single socketed (ISI Marked) any length with rubber ring joints complete fittings etc fixed to wall with MS clamps 8mm dia with two nuts wall nails etc or laid in trenches, in floors including dismantling AC Pipe/PVC pipes complete all as specified and directed. |
| 61 | S&F 75mm bore PVC (SWR) bends diminishing pieces or tapers with access doors etc, complete all as specified and directed. |
| 62 | S&F 110mm bore PVC (SWR) bends diminishing pieces or tapers with access doors etc, complete all as specified and directed. |
| 63 | S&F 600mmx450mm size bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 64 | S&F in repairs 500 ltrs rotational Moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 65 | S&F in repairs 1000 ltrs Rotational Moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 66 | S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed. |
| 67 | S & F in repair gun-metal, globe or gate valves of 20mm thick, with iron wheel head, screwed both ends for iron pipe and fixed etc complete all as specified and directed. |
| 68 | Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed. |
| 69 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed. |
| 70 | S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed |
| 71 | S&F 75mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 72 | S&F Aluminium handles 100mm long, cast type, anodised complete all as specified and directed. |
| 73 | S&F Aluminium anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed. |
| 74 | S&F Aluminium handles 150mm long, cast type, anodised complete all as specified and directed. |
| 75 | S&F Aluminium anodised, barrel tower bolts 200mm of extruded section and fixed complete all as specified and directed. |
| 76 | S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250 mm size complete all as specified and directed. |
| 77 | S&F 35mm thick made of 2nd class SW Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 78 | S&F 35mm thick glazed and skeleton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20 (a) in 2nd class soft wood complete all as specified and directed. |
| 79 | S&F 30mm thick glazed and skeleton shutters for window & ventilator open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred brads for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.24 (b) in 2nd class soft wood complete all as specified and directed. |
| 80 | S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 81 | S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane including hacking out old broken glass complete all as specified and as directed. |
| 82 | S&F in repair vitreous China squatting pan \\"ORISSA\\" pattern size 580mmx440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap including cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified and directed. |
| 83 | M&L precast Reinforced cement concrete type B1 1:2:4 cover slabs (for man holes/drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 including Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 84 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 85 | S&F of Pre-painted galvalume aluminium Zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screw including necessary scaffolding, upto four storey building including dismantling old unserviceable steel sheet complete all as specified and directed. Note : Cost of scaffolding work for fixing of roof sheet to be included in the unit rate quoted by tenderer. |
| 86 | S & F of Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary scaffolding, upto four storey building including dismantling unserviceable steel sheet complete all as specified and directed. Note : Cost of scaffolding work for fixing of roof sheet to be included in the unit rate quoted by tenderer. |
| 87 | S&F in repair Facia/Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed. |
| 88 | S&F 300mm dia bore reinforced concrete pipes, class NP3, laid and jointed with collar including providing cement concrete bed 1:4:8 type D-2 to drain pipes including packing under and completely surrounding pipes after they are laid and tested; in complete all as specified and directed. |
| 89 | S&F 150mm reinforced concrete pipes, class NP3, laid and jointed with collar in cement concrete bed 1:4:8 type D-2 to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed. |
| 90 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed. |
| 91 | M&L Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed. |
| 92 | S&F 5.5mm Sheet glass, ground or obscured or frosted, on one side and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. Please Enable Macros to View BoQ information |
