|
| 1 | Demolition of cement concrete of any description and in any position, not otherwise specifically provided for and removing of debrish outside MoD land, complete all as specified and directed. |
| 2 | M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation for fencing post, filling in and mass concrete, complete all as specified and directed. |
| 3 | Dismantling of posts or struts (wood, steel or RCC), embeded in concrete of any section including taking out embedded portion and making good disturbed ground, complete all as specified and directed. |
| 4 | Dismantling of fencing wire mesh of any type and size, complete all as specified and directed. |
| 5 | M&L for mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work, conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 6 | M&L for mild steel framed work such as grills, gratings, hold fasts etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, ladders, framed balusters including portions framed and hung as gates, pintle hinges, stops, hand made sliding bolts etc, conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 7 | Supply only chain link fencing, galvanised mild steel wire of any thickness and any size of aperature, complete all as specified and directed. |
| 8 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and directed. |
| 9 | M&L for preparation of new or previously treated steel/ iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 10 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base etc, complete all as specified and directed. |
| 11 | M&L for 75mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in floor, complete all as specified and directed. |
| 12 | Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in road side kerb stone etc. (of any section indicated) with plain fair faces including chamfers, weathering, throating etc. and setting in cement mortar 1:4 complete with joints to match, complete all as specified and directed. |
| 13 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extrasand, complete all as specified and directed. |
| 14 | All as per serial item No. 13.00 here-in-above but except paver blocks and including dismantling. Please Enable Macros to View BoQ information |
| 15 | All as per serial item No. 13.00 here-in-above but except paver blocks and including dismantling. Please Enable Macros to View BoQ information |
