|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises, complete all as specified and directed. |
| 2 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water including remaval of derbis up to 5 KM etc from site, complete all as specified and directed. |
| 3 | Demollition of stone slabs and tiles, laid bedded and pointed in any mortar of any description or thickness as in floors, aprons etc, complete all as specified and directed. |
| 4 | Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed. |
| 5 | Demolition of brick work or stone masonry, built in cement mortar including all quoines, arches, pillar etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 6 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 7 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 8 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks etc. including cleaning or removal to store (measured overall as fixed along the centre line over fitting and accessories), complete all as specified and directed. |
| 9 | Dismantling of water tank and removing to store, capacity exc 250 litres but not exc 500 litres with all necessary fittings, complete all as specified and directed. |
| 10 | Dismantling of water tank and removing to store, capacity exc 500 litres but not exc 1000 litres with all necessary fittings, complete all as specified and directed. |
| 11 | Dismantling of water tank and removing to store, capacity exc 1000 litres but not exc 2000 litres with all necessary fittings, complete all as specified and directed. |
| 12 | Taking up or down steel water tubing and connections including cleaning for refixing or removal from site to store, bore of pipe 15mm, complete all as specified and directed. |
| 13 | Taking up or down steel water tubing and connections including cleaning for refixing or removal from site to store, bore of pipe 20mm, complete all as specified and directed. |
| 14 | Taking up or down steel water tubing and connections including cleaning for refixing or removal from site to store, bore of pipe 25mm, complete all as specified and directed. |
| 15 | Taking down chowkats or frames of any type or description (without taking off shutters from frame), area not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 16 | Taking down and re-fixing in same opening of wooden / PVC shutters of any description after easing/ cutting as per site requirement, area exc 1.0 Sqm but not exc 2.0 Sqm each shutter, complete all as specified and directed. |
| 17 | Taking down chowkats or frames of any type or description (without taking off shutters from frame), area exc 1.50 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed. |
| 18 | Taking down of shutters of any description, area not exc 1.0 Sqm each, complete all as specified and directed. |
| 19 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets, complete all as specified and directed. |
| 20 | M&L for non skid ceramic coloured tiles of 7 to 8mm thick (square / rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 21 | M&L for coloured glazed ceramic tiles of each size 350x250x7mm / 450x350x7mm as on vertical surfaces of walls, dados, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4, complete all as specified and directed. |
| 22 | M&L for 10mm thick vitrified light shade coloured ceramic tiles (square/ rectangular), polished, area of each tile not exceeding 0.36 Sqm as in floors including skirtings etc, fixed/laid over and including 15mm thick screed bed in CM 1:4, set and jointed with 2/3mm wide uniform spacers (as directed by EIC). Joints shall be filled and pointed with waterproof epoxy grout or polymer modified cementitious grout (e.g., Laticrete, Roff, or Fosroc) of matching shade to tiles including cleaning and finishing of joints, complete all as specified and directed. |
| 23 | M&L for 10mm thick coloured vitrified tiles, light shade (square/ rectangular), polished, area of each tiles exc 0.64 Sqm but not exc 1.0 Sqm as in floor etc, set, jointed and pointed in colour tile grout, fixed/ laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 24 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing with rounding to edges of stone slabs one edge complete, fixed over and including 10mm thick backing coat in CM 1:4, ccomplete all as specified and directed. |
| 25 | M&L for 10mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 including finishing the surface even and smooth without extra cement, complete all as specified and directed. |
| 26 | M&L for 15mm thick rendering into two layers consisting of 10mm thick in CM 1:4 followed by 5mm thick in CM 1:4 with using WPC on fair faces of brick work or concrete surface including finished the surface even and fair,complete all as specified and directed.Note :- WPC shall be measured and paid separately under respective item of this BOQ. |
| 27 | M&L for 5mm thick rendering on fair face of brick work or concrete surfaces of ceiling in cement mortar 1:3, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 28 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 29 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer and 2-3mm thick wall care putty, complete all as specified and directed. |
| 30 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer, complete all as specified and directed. |
| 31 | M&L for brick work with sub class ‘B’, old size bricks, straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed. |
| 32 | All as per srl item No. 31.00 here-in-above but except bricks and using existing bricks including cleaning etc. complete all as specified and directed.Note :- Old bricks obtained against dismantling/ demolition shall be used after properly ceaning. |
| 33 | M&L for walling of random rubble stone masonery, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed. |
| 34 | All as per srl item No. 33.00 here-in-above but except stone and using existing stone including cleaning etc. complete all as specified and directed.Note :- Old stones obtained against dismantling/ demolition shall be used after properly ceaning. |
| 35 | M&L for raised pointing to random rubble stone masonry uncoursed or brought upto course on masonry or concrete block walling in cement mortar 1:4, complete all as specified and directed. |
| 36 | M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping etc. including necessary formwork as required, complete all as specified and directed. |
| 37 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 38 | M&L for RCC 1:2:4 (Nominal Mix) type B-1 (using 20mm gradded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 39 | Use and waste of formwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 40 | M&L for 50mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, laid in alternate ways (not exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 41 | M&L for water proofing treatment to the sunken portion area of each sunken portion with removing of exiting treatment with demolition of existing floor of any type upto depth not exc 0.60 mtr including filling of floor with PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates), WC & P/S trap and cleaning with wire brush, one coat of bitumen @ 1.70 Kg per Sqm, 15mm thick plaster in CM 1:4 on all sides portion, one 450mm long 32mm dia spout, water proofing powder @ 3% mixed by weight of cement, complete all as specified and directed. |
| 42 | S&F in replacement of WC (squatt pattern) including cement concrete bedding, size 580mm x 440mm including PVC 'P or 'S' trap, front and back inlet and with internal foot rests (excluding flushing cistern) including flush pipe and connector pices of PVC and removed old CI Pipe including demolition of PCC upto 450mm depth, complete all as specified and directed. |
| 43 | S&F in replacement of wash down water closet (Pedestal pattern), complete with Pedestal pan and 'P' trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. including PVC seat and cover for pedestal pan and CP Jet alongwith flexible tube/pipe, complete all as specified and directed. |
| 44 | S&F in replacement of PVC low level flushing cistern of capacity 10 ltrs, white with inlet, ball valve, float and handle including breckets, flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipe, complete all as specified and directed. |
| 45 | S&F in replacement of wash basin, vitreous china (flat back or angle back type), size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling of 32mm dia and PVC waste pipe of 32mm dia, complete all as specified and directed. |
| 46 | S&F in replacement of vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) but including urinal spreader with PVC connection of 15mm size with PTMT nuts of length 450mm and PVC waste pipe of 32mm bore and CP waste coupling, complete all as specified and directed. |
| 47 | S&F toughned glass 12mm thick as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes as required, complete all as specified and directed. |
| 48 | S&F in replacement of chromium plated, swan neck pillar cock, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed. |
| 49 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 50 | S&F in replacement of PVC connection of 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed. |
| 51 | S&F in replacement of health faucet, CP, brass with 8mm dia and 1 mtr long flexible tube with wall hook, complete all as specified and directed. |
| 52 | S&F in replacement of CP Jets for EWC's with required size of jet pipe (flexible) and connections etc, complete all as specified and directed. |
| 53 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamps of suitable size, nuts and bolts, complete all as specified and directed. |
| 54 | S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamps of suitable size, nuts and bolts, complete all as specified and directed. |
| 55 | S&F 110mm bore PVC (SWR) bends with access door of any radius, complete all as specified and directed. |
| 56 | S&F 75mm bore PVC (SWR) bends with access door of any radius, complete all as specified and directed. |
| 57 | S&F PVC (SWR) branch piece, single (single Y/T) equal or unequal, suitable for 110mm bore pipe, complete all as specified and directed. |
| 58 | S&F PVC (SWR) branch piece, single (single Y/T) equal or unequal, suitable for 75mm bore pipe, complete all as specified and directed. |
| 59 | Cleaning and disinfecting of water storage tanks (Steel/ RCC/ PVC) exceeding 250 Litres but not exceeding 500 Litres capacity by mechanized means. The process shall include de-watering by submersible pumps, removal of sludge/ debris by high-vacuum suction, high-pressure water jetting (min. 100 bar) of all internal surfaces including walls, floor, and ceiling. Particular attention shall be paid to removing all scale, dirt and calcification from the mouths of circulating, inlet, outlet and washout pipes. The process shall further include anti-bacterial spray treatment using approved disinfecting agents and final vacuuming to leave the tank bone dry and the Date of Cleaning and the Next Due Date for cleaning shall be neatly stencilled or painted on the external surface of the tank (or a nearby visible board) using waterproof enamel paint, complete all as specified and directed.Note :- Rates shall be deemed to include for all labour, mechanized equipment, tools, tackles and consumables. |
| 60 | All as per serial item No. 59.00 here-in-above but capacity exc 500 litres but not exc 1000 litres. |
| 61 | All as per serial item No. 59.00 here-in-above but capacity exc 1000 litres but not exc 2000 litres. |
| 62 | S&F tripple layer rotational moulded polyethylene water storage tank, white colour, 500 ltrs capacity (cylindrical vertical with closed top) including 20mm dia ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes, complete all as specified and directed. |
| 63 | S&F tripple layer rotational moulded polyethylene water storage tank, white colour, 1000 ltrs capacity (cylindrical vertical with closed top) including taking down existing water tank & disconnecting old RCC tank and 20mm dia ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes, complete all as specified and directed. |
| 64 | S&F rotational moulded (3 layered as per IS:12701) polythylene water storage tank cylindrical vertical with closed top hoisted capacity upto 2000 ltrs ISI marked with valid CMLNo and fixed in position, complete all as specified and directed. |
| 65 | S&F Chlorinated Polyvinyl Chloride (CPVC) pipe, 25mm bore, SDR 11 (Class 1) conforming to IS:15778 for overflow line from 500/1000 Litre PVC water storage tank including all fittings and fixing the pipe with GI clamps at equal spacing including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints, complete all as specified and directed. |
| 66 | Supply and installation of 20mm outer dia 3-layer PP-R (Polypropylene random copolymer) pipes conforming to IS:15801, SDR 7.4 (PN16)/ SDR 6 (PN20), UV stabilized and antimicrobial, heat fusion welded. Fixing to walls/ ceilings with MS clamps with rubber inserts as required including PP-R plain & brass threaded transition fittings for hot & cold water supply, tested for pressure, cutting and making holes in walls, floors, slabs and making good to match existing finish, complete all as specified and directed. |
| 67 | All as per serial item No. 66.00 here-in-above but 25mm outer dia. |
| 68 | S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed. |
| 69 | S&F 20mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed. |
| 70 | S&F 25mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed. |
| 71 | S&F in replacement bib tap, long body, chroimum plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule including elbow/ socket etc as required at site, complete all as specified and directed. |
| 72 | S&F in replacement of CP shower rose with arm 15mm dia, 195mm long with bend of 45 degree with wall flange including taking down existing UNSV shower of any type/ shape, complete all as specified and directed. |
| 73 | S&F in replacement of angle cock, chromium plated, cast copper alloy, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed. |
| 74 | S&F in replacement of stop valve concealed type, long shank, chromium plated brass, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed including fittings as required at site, complete all as specified and directed. |
| 75 | S&F in replacement of plastic water closet seat cover, white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 76 | S&F in replacement 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 77 | S&F in replacement of PVC bathroom cabinets, quality as approved by Engr-in-Charge, size 600mm x 400mm with mirror on front door and with one towel rail for hanging towel of MS chromium plated fixed with ss screws and wooden gutties etc, complete all as specified and directed. |
| 78 | S&F in replacement chromium plated tubular towel rail, 'D' type, 600mm long between flanges, complete all as specified and directed. |
| 79 | S&F in replacement of waste fittings, brass chromium plated for glazed ware sink, sink coupling, basins etc. with long screwed shank and fly nuts, flanges end bedded in red lead cement and other end fixed, size 40/32mm dia, complete all as specified and directed. |
| 80 | S&F in replacement of CP brass grating of 100mm dia with centre hole, complete all as specified and directed. |
| 81 | S&F in replacement of PTMT ball valve of 20mm dia high pressure with polythene float and fly nut, complete all as specified and directed. |
| 82 | M&L for preparation of new wooden or untreated wood surfaces of any description, exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 83 | M&L for providing cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) for filling in the pressed steel door frame/ hold fast, complete all as specified and directed. |
| 84 | Checking of joinery (wooden/ steel) iron/ aluminium mongery, pelmet box, door springs etc. requiring carpentry work and carrying out minor repairs such as tightening of screws/ nails, minor adjustment of joinery, door / windows by means of planer/ chisling etc. including petty repairs material like screws, nails, plug etc. to make it functional, complete all as specified and directed. |
| 85 | Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/ fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc. including petty materials like washers of all sizes, thread (shoot), M-seal, screws, nails and white cement to make water supply / plumbing lines functional and leak proof, complete all as specified and directed.Notes for serial item Nos 84.00 & 85.00 here-in-above :-(a) Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. (b) The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell / Engr-in-charge/ JE-in-Charge daily and all complaint will be rectified by the contractor within same day then the returned the complaint slip after completion of complaint and get recipt from concered JE/Engr-in-charge. If he fails to complete the work within same day, then a recovery will be made @ Rs. 150.00 per complaint per day. |
| 86 | S&F in replacement of 25mm dia stainless steel curtain rod with fixing of domes with stainless steel brackets etc, fixed with ss screws, complete all as specified and directed. |
| 87 | S&F in replacement of sink with drainage board, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including waste coupling and waste pipe & bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1040mm x 510mm x 203mm bowl size 510mm x 405mm x 203mm, complete all as specified and directed. |
| 88 | S&F in replacement of sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling inlcuding bedding in cement mortar to dwarf wall or including fixing cantilever brackets, PVC waste pipe and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 89 | S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening and fixed at site, complete all as specified and directed. |
| 90 | S&F factory made solid panel PVC door shutter, 30mm thick (style), consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site, complete all as specified and directed. |
| 91 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 92 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 93 | S&F 4mm thick plain/ pin headed sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane including new clips or pins as requited at site, complete all as specified and directed. |
| 94 | S&F 4mm thick plain/ pin headed sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares exceeding 0.50 Sqm in each pane including new clips or pins as requited at site, complete all as specified and directed. |
| 95 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips, complete all as specified and directed. |
| 96 | S&F 150mm long aluminium, anodised, barrel tower bolts of extruded sectio, fixed with SS screws, complete all as specified and directed. |
| 97 | S&F 150mm long aluminium handles, cast type, anodised, fixed with SS screws, complete all as specified and directed. |
| 98 | S&F 100mm long stainless steel butt hinges, heavy weight, cold rolled, fixed with SS screws, complete all as specified and directed. |
| 99 | S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 100 | S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed. |
| 101 | S&F MS helical door spring, 150mm size including roller and roller plate, fixed to wooden or steel frames with welding etc, complete all as specified and directed. |
| 102 | M&L for pressed steel frames, section size of frame 105mm x 60mm for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc. including one shop coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 103 | M&L for pressed steel frames, section size of frame 125mm x 60mm for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc. including one shop coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 104 | S&F 35mm thick flush door shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face sanmika (pattern and design approved by Engr-in-Charge) with lipping/ frame to match and polished on sides of shutters, complete all as specified and directed. |
| 105 | S&F 35mm thick 2nd class hard wood glazed and skeleton, factory made panel shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters, complete all as specified and directed. |
| 106 | S&F in repair 18mm thick prelaminated medium density fibre boards, glossy finish/ UV finish interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with SS screws as in cup board, shelves, kitchen cabinet etc, complete all as specified and directed. |
| 107 | S&F 100mm long aluminium anodised hasp and staple, complete all as specified and directed. |
| 108 | S&F in replacement of 100mm long aluminium anodised hasp and staple, complete all as specified and directed. |
| 109 | Repair to aluminium door or window of any size, shape and description including easing, cutting, drilling including provn of parts such as rubber gasket, blanket cloth but hinges etc. to make door or window fully functional, complete all as specified and directed. |
| 110 | S&F mortice lock with two lever mild steel body (vertical type), 100mm length of latch with 3 set of keys, fixed in door shutter with proper in position, complete all as specified and directed. |
| 111 | S&F anodised aluminium snap grid frame work for false ceiling, complete all as specified and directed. |
| 112 | S&F 4mm thick non asbestos fibre cement building boards designer, fixed or laid / inserted to timber / GI / Aluminium framework with screws, complete all as specified and directed. |
| 113 | S&F powder coated (of approved colour) aluminium sections as in frame & shutter of doors, windows (hung/ sliding type), ventilators (louvers/ fixed type) and fixed frame etc, fixed to wall including preparation of disturbed portion both side (internal & external surfaces of wall) to match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face), complete all as specified and directed. |
| 114 | M&L for anodised aluminium grill 5 to 6mm dia of mesh not exc 7.5cm in either direction (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete as per requirement and direction of Engr-in-Charge. |
| 115 | S&F in replacement of 150mm long aluminium handles, cast type, anodised, complete all as specified and directed. |
| 116 | S&F 5mm thick frosted / tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/ windows in square/ rectangular exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 117 | S&F 5mm thick frosted / tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/ windows in square/ rectangular not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 118 | S&F 5mm thick printed colour PVC sheet as in aluminium doors / partitions, fixing wirh rubber neoprene packing and powder coated aluminium beading, complete all as specified and directed. |
| 119 | S&F in replacement of door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000mm in width and of weight between 61 to 80 KG and fixed, complete all as specified and directed. |
| 120 | S&F 5mm thick insulated PVC Wall Lining honeycombed (As per sample kept in GE's office), consisting of PVC insulated panels with approved colour and design printed PVC sheet used colour PVC sheet duly fitted into the wall including PVC sheet in strips feathered at the edges including removing and refixing electric switch boards & plates and covered with PVC stripes or beading after fixing wall panelling as per specifications, complete all as specified and directed. |
| 121 | S&F in replacement of floor door machine, suitable for aluminium glass door shutters of 851mm to1000mm in width and of weight between 61 to 80 KG, complete all as specified and directed. |
| 122 | M&L for 10mm thick rendering on fair faces of brick work / concrete surfaces in cement mortar 1:3 and finished the surface even and smooth without using extra cement before application of priming coat, complete all as specified and directed. |
| 123 | M&L for preparation of surface by scrapping and properly cleaning the existing roof treatment in any number of layers upto original RCC roof top surface. Apply first coat fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.451tr/sqm. Apply third and final coat undiluted @ 0.45 ltr/Sqm, complete all as specified and directed. |
| 124 | M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed. |
| 125 | S&F factory made (box type) mild steel widow/ ventilators glazed and gauged combined shutter with side hung including box type hinges, steel peg stay, locking arrangement with glazing and gazing bar dovetailed or welded and one shop coat of red oxide primer, complete all as specified and directed with the followings:-NOTES (i) The window /ventelator shall be fabricated as per drg No CEUZ/TD/1302/2009 sheet 1/3 to 3/3. (ii) MS fillets, glazing, wire gauges shall be measured and paid for seperately. (iii) One side out to out dimensions shall be measured for payment of combined window (glazed & gauged). |
| 126 | S&F prepainted coloured corrugated profiled Galvalume / Zincalume sheet with min 0.50mm TCT with BTM of 0.45mm thick conforming to IS-513 (AZ-150 GSM, Al Zn alloy metallic coating 550 MPA yield stress as per AS-1397) as in roof covering/ clading to wall, fixed with self taping screws, colour/ exterior coat of silicon modified polyster / BHP x RW paint system 20 micron top coat applied over 5 micron primer and a micron polyster back coat applied over 5 micron primer, all fixed with galvanised self drilling self tapping fastener(12-14 x 55 with EPDM seals), complete all as specified and directed |
| 127 | S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ ridge/ valley gutter/ facia of bldg, fixed with self tapping screws / 'J' hooks or suitable arrangements as per situation or site requirement, complete all as specified and directed. |
| 128 | S&F precast cement concrete jallies 25mm thick (measured solid), set in cement mortar 1:4 including all moulding and necessry formwork, complete all as specified and directed. |
| 129 | S&F in replacement of sink wall mixer, brass, chromium plated, fancy type, with capstan head handles, screwed down, high pressure with lettered 'hot' and 'cold' including CP brass wall flanges and necessary extension nipples, screwed for 15mm bore pipe connection, complete all as specified and directed. |
| 130 | S&F in replacement of soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, complete all as specified and directed. |
| 131 | S&F in replacement of toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screws, complete all as specified and directed. |
| 132 | S&F in replacement of One Piece Wash down water closet (Pedestal pattern) complete with Pedestal pan and 'P' trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. including PVC seat and cover for pedestal pan and CP Jet, health faucet alongwith flexible tube/pipe, complete all as specified and directed. |
| 133 | S&F in replacement of plate rack of size 750mm x 750mm x 300mm, made of selected quality 0.63mm thick stainless sheet of shape and design as approved by GE, fixed with brass screws and rawl plugs, complete all as specified and directed. |
| 134 | S&F in replacement of single lever wall mixer 3 in 1, telephonic type, brass, chromium plated, fancy type with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure including CP brass wall flanges and necessary extension nipples, screwed for 15mm bore pipe connection with provision for both hand shower and over head shower, complete all as specified and directed. |
| 135 | S&F in replacement of centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down high pressure with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe connection, complete all as specified and directed. |
| 136 | S&F in replacement of spindle suitable for 15mm bore CP taps / mixers, complete all as specifed and directed. |
| 137 | S&F in replacement of PVC lid with locking arrangements, fixing with screws, suitable for PVC water tank of capacity upto and including 500 Ltrs, complete all as specified and directed. |
| 138 | S&F in replacement of PVC lid with locking arrangements, fixing with screws, suitable for PVC water tank of capacity exceeding 500 Ltrs and upto and including 1000 Ltr, complete all as specified and directed. |
| 139 | S&F in replacement of waste pipe of dia 32mm, suitable for WHB/ sink, complete all as specified and directed. |
| 140 | S&F in replacement of waste pipe of dia 40mm, suitable for WHB/ sink, complete all as specified and directed. |
| 141 | S&F in replacement of 32mm bore CP brass waste coupling, suitable for WHB, complete all as specified and directed. |
| 142 | S&F in replacement of 40mm bore CP brass waste coupling, suitable for Kitchen sink, complete all as specified and directed. |
| 143 | S&F in replacement of drawer side channel of std size and including of roller for moving drawer, mild steel bright finish or electrogalvanised, complete all as specified and directed. |
| 144 | S&F in replacement of stainless steel multipurpose bracket in wooden drawer/ partitions for storing rations of various types, made of 4mm dia stainless steel rods, fixed in side partitions etc fixed, suitable for modular kitchen, complete all as specified and directed. |
| 145 | S&F in replacement of continuous piano hinges mild steel, bright finish or electro galvanised with width of flap 30mm when open, complete all as specified and directed. |
| 146 | S&F in replacement of 40mm dia cup board knobs, brass polished, fixed with nuts, screws and washer of mild steel, complete all as specified and directed. |
| 147 | S&F in replacement of 22mm dia MS dark brown powder coated curtain rod with end brackets and side brackets with designer end pieces, fixed with screws and plugs, complete all as specified and directed. |
| 148 | M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 or filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified and directed. |
| 149 | M&L for injecting siliconate based water repellent chemical (such as sodium methyl siliconate or silane-siloxane micro-emulsion) into existing masonry walls to form a remedial damp-proof course. The process includes drilling 12mm to 16mm diameter holes at a downward angle of into the mortar joints at approximately 100mm to 150mm centers at plinth level, cleaning the holes with compressed air and injecting the chemical under low pressure or by gravity until complete saturation of the masonry is achieved including plugging the holes with cement mortar (1:3) mixed with waterproofing compound, complete all as specified and directed. |
| 150 | M&L for complete removal of existing treatment on old decorated surfaces of wall, plasteres or unplastered by washing, rubbing down and stopping of distempred and painted surfaces and applying two coats of oil bound distemper over a coat of primer on wall and applying 2-3mm thick of wall care putty, completed all as specified and directed.Note :- Wall care putty shall be applyed in two coats and each coat shall be rubbed and smoothhen by suitable emery/ sand paper. |
| 151 | M&L for complete removal of existing treatment on old decorated surfaces of walls, chajjas, balcony, facia etc. by brooming down or steel wire brushing, scraping down smoke soots, moulds, moss efforescent salls, treating oil and greasy spots etc. and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS:15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over wall surfaces and including 2-3mm thick putty, complete all as specified and directed.Note :- Wall care putty shall be applyed in two coats and each coat shall be rubbed and smoothhen by suitable emery/ sand paper. S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. Please Enable Macros to View BoQ information |
