|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding complete, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Demolition of brick work or stone boulder masonry built in cement mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 3 | Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 4 | All as per serial item No. 3.00 here in before but except bricks complete all as specified and as directed. |
| 5 | M&L for half brick work with sub class ‘B’ brick straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and as directed. |
| 6 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 7 | Taking down cement plaster of any description on bricks, PCC block or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 8 | 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed. |
| 9 | 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as specified and as directed.NOTE: WPC shall be measured and paid for separately. |
| 10 | 5mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and without using extra cement complete all as specified and as directed. |
| 11 | Non skid coloured ceramic tiles area of each tile exc 0.11 sqm but n.exc 0.36 sqm 7mm to 8mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) including in skirting complete all as specified and as directed. |
| 12 | Glazed ceramic tiles (coloured) on vertical surfaces of size 450x350x7mm/350x250x7mm/ 600x300x7mm thick set and jointed in neat cement slurry over and including 10mm thick rendering in CM 1:4 and pointed in coloured cement to match complete all as specified and as directed. |
| 13 | 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor or roof and finished even and smooth with using extra cement complete all as specified and as directed. |
| 14 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and as directed. |
| 15 | All as per item No 14.00 here in before but exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified and as directed. |
| 16 | Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc complete, of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 17 | Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc complete, of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 18 | Factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 19 | All as per item no 18.00 here in before but glazed and skeleton shutter with sash bar for glass/wire gauge complete all as specified and as directed. |
| 20 | Providing cement concrete 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and as directed. |
| 21 | S&F factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings complete all as specified and as directed. |
| 22 | S&F factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs complete all as specified and as directed. |
| 23 | Steel windows & ventilators/ box type comprised of tubular frame and shutters made out of 1.58mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (Grill, wire Mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed of welded including 2 Nos tower bolts 150mm long for each leaf including other fittings, hinges, handles tarred hold fasts etc. all as shown on drg No CEUZ TD-1517/15 sheet 1/3 to 3/3 including a coat of red oxide primer complete all as specified. |
| 24 | Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to FE 410-O or FE 310-O complete all as specified and as directed. |
| 25 | Aluminium anodised bolts barrels tower bolts with bright bolt 150mm long complete all as specified and as directed. |
| 26 | Aluminium anodised bolts barrels tower bolts with bright bolt 200mm long complete all as specified and as directed. |
| 27 | Aluminium alloy anodised sliding door bolt 300 mm length with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 28 | Aluminium handle cast type 150mm long oval type complete all as specified and as directed. |
| 29 | Preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 30 | Preparation of new or previously untreated steel surface of any description exc 10cm with or girth an applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 31 | S&F in repair vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest (excluding flushing system and flush pipe) with ‘P’ or ‘S’ trap complete all as specified and as directed. |
| 32 | S&F vitreous china wash down water closet pan `P` or `S` trap ( pedestal pattern ) white including fixing bolts,including connection P trap etc to drain pipe ( or out going pipe) and to flushing pipe,antisyphonage pipe etc complete.all as specified & directed by Engr-in-Charge. |
| 33 | PVC 10 Ltr low level flushing cistern white with inlet including bracket and 32mm flush pipe of polyethylene ball valve, float and handle of low or high density and 15mm PVC connection 450mm long complete all as specified and as directed. |
| 34 | Vitreous china wash basin pedestal type white flat back size 550x400mm including waste coupling CP 32mm dia chain and plug and porcelain stopper and CI brackets of iron 65x65x6mm embedded in PCC block with PCC 1:2:4 type B-1 and including 450mm long PVC waste pipe getting with holes complete all as specified and as directed. |
| 35 | 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joint laid in floors or in trenches complete all as specified and directed. |
| 36 | 75mm bore cast iron bend (any radius) diminishing pieces or tapers (large bore measured) with oval access doors complete all as specified and directed. |
| 37 | 75mm bore cast iron branch pieces, single, (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch with oval access doors complete all as specified and directed. |
| 38 | S&F in repair Viterous china wash basin Oval counter type white flat back size 560 x 400mm including waste coupling CP 32mm dia chain and plug and porcelain stopper and CI brackets of iron 65 x 65 x including 6mm embedded in PCC block with PCC 1:2:4 type B-1 and including 450 mm PVC waste pipe getting with holes complete all as specified and directed. |
| 39 | S&F in repair pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed of iron pipe of bore 15mm bore complete all as specified and as directed. |
| 40 | S&F pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed of iron pipe of bore 15mm bore complete all as specified and as directed. |
| 41 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 42 | S&F in repair Towel rail 600mm long aluminium tower bolts 20mm D type complete all as specified and as directed. |
| 43 | S&F in repair 600mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 44 | Prepration of new decorated surfaces and applying two coats of Distemper oil emulsion on walls over and including a coat of 1mm wall care putty including complete removal of existing treatment complete all as specified and as directed. |
| 45 | M&L three coat of white wash on new surface of ceiling including preparation of surfaces complete all as specified and as directed. |
| 46 | M&L two coat of cement base paint over newly plastered surfaces of wall including one coat of cement primer and preparing surfaces complete all as specified and as directed. |
| 47 | All as per serial item No. 46.00 here in before but on ceilings. |
| 48 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm dia complete all as specified and as directed. |
| 49 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20mm dia complete all as specified and as directed. |
| 50 | Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore complete all as specified and as directed. |
| 51 | Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore complete all as specified and as directed. |
| 52 | S&F in repair angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15mm dia complete all as specified and as directed. |
| 53 | S&F in repair 15mm bore Bib taps, cast copper alloy, fancy type chromium plated, with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 54 | S&F 15mm bore Bib taps, cast copper alloy, fancy type chromium plated, with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 55 | S&F 15mm bore Bib taps, cast copper alloy, fancy type chromium plated, with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Please Enable Macros to View BoQ information |
