|
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.(Posts embedded in natural ground) |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.(Posts embedded in concrete, brick work, masonry etc) complete all as specified and directed by Engr-in-Charge |
| 3 | Exavation in post holes in hard/dence soil (for similar holes) each n.exc 0.5 cum, getting out, returning,filling in and remming each of broken rubble mixed with earth aroundin layers not exc 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface all as spd and directed. |
| 4 | M&L for Cement concrete PCC 1:2:4 type B2 using 40mm graded crushed stone agg as in fdn/ sub base of posts all spd and directed . |
| 5 | S&F Mild steel work in posts and struts in fencing including cutting tops to shape as directed ,drilling holes notching for wire etc, flat iron fillets for securing wire mesh/chain link fencing including all necessary welding, drilling, bolting or riveting etc and similar work and providing MS flat for welding of GI mesh to posts or struts as spd and directed |
| 6 | S&F Mild steel screw bolts 10mm dia(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, Diameter of neck is 11 to 15 mm, n exc 5cm long as spd and directed |
| 7 | Supply and fixing mild steel round bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia ,or securing with clips of Fe-410W(Gde.E250) quality -A or Fe290(Gde-E-165) complete all as specified and directed by Engr-in-Charge. |
| 8 | Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-Charge |
| 9 | Supply only chainlink fencing 4 mm dia of galvnised steel wire 100mm x 100mm made up into matteress or cages,complete all as specified and directed |
| 10 | Fixing only chain link fencing complete including line wires,any mesh,size and type to any type of standards rails ,straining bolts,etc including provission of binding wire. complete all as specified and directed by Engr-in-Charge. |
| 11 | Supply and fixing in repair of barbed wire, galvnised,2 stand steel 2.24mm dia barbed with 2mm dia barb with wire 75mm spacing and straining and fixing to any type of standard rails straing bolts including ,securing or tying at crossing with and provision of galvanised mild steel wire,staples or steel pin etc and complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for prepration of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed by Engr-in-Charge |
| 13 | M&L for applying two coats of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed |
| 14 | Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc all as specified. |
| 15 | M&L for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate ) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:6 complete all as specified and directed by EIC |
| 16 | Taking down cement plaster of any description all as specified and directed by Engr-in-charge. |
| 17 | M&L for Rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) and finished even and smooth without using extra cement all as specified and directed by Engr-in-charge. |
| 18 | M&L preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
